Custom Land Rover Series & Defender Parts

ALL

Available products for the Land Rover Defender & Series Vehicles from SDO.

Items 1 to 100 of 134 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. Defender Front Grille

    Defender Front Grille

    $500.00

    This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. PLEASE NOTE: we currently have two versions of the Front Grille - one designed for those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle), and those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle). This unit is designed for those with the in-cabin bonnet pull cable, if you require the other version of the Front Grille please see our other listing. Learn More
  2. Defender Headlight Surrounds (set of 2)

    Defender Headlight Surrounds (set of 2)

    $750.00

    These are replacement headlight bezel finisher/surrounds for a Land Rover Defender, CNC milled from a one-piece 3" thick block of billet aluminum. These are a perfect complement to our SDO Defender Front Grille, and are likewise powdercoated black for a durable finish. Available with three different design options for the area between the marker lights & turn-signal lights - SOLID, VENTED, or POCKET MILLED. The factory headlight surrounds are extremely flimsy plastic, and tend to crack, break, and become brittle over time. Our solid aluminum headlight surrounds are a great upgrade to any Defender, and a durable solution that will last a lifetime. Learn More
  3. Defender Front Grille (w/ cutout for manual bonnet latch)

    Defender Front Grille (w/ cutout for manual bonnet latch)

    $500.00

    Similar to our "standard" SDO Front Grille....BUT this particular unit is designed for those those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle and allows you to manually open the bonnet), versus those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle). This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. Learn More
  4. Wingtop Vents (standard SET)

    Wingtop Vents (standard SET)

    $190.00

    CNC milled aluminum replacement wingtop vents (SET) Learn More
  5. Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

    Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

    $250.00

    Stamped 16-guage aluminum sheet (~0.0625" thick), and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 without air conditioning. Learn More
  6. Wingtop Vent (standard LEFT-SIDE ONLY)

    Wingtop Vent (standard LEFT-SIDE ONLY)

    $95.00

    CNC milled aluminum replacement wingtop vent (LEFT-SIDE ONLY) Learn More
  7. Wingtop Vent (standard RIGHT-SIDE ONLY)

    Wingtop Vent (standard RIGHT-SIDE ONLY)

    $95.00

    CNC milled aluminum replacement wingtop vent (RIGHT-SIDE ONLY) Learn More
  8. Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

    Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

    $95.00

    SOLID TOP LEFT-SIDE ONLY milled aluminum wingtop vent (for Left-Hand Drive vehicles only) Learn More
  9. Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

    Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

    $95.00

    SOLID TOP RIGHT-SIDE ONLY milled aluminum wingtop vent (for Right-Hand Drive vehicles only) Learn More
  10. 300Tdi/Td5/Puma Side Air Intake Vent Grille

    300Tdi/Td5/Puma Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 300Tdi / Td5 / Puma Side Air Intake Vent Grille (milled aluminum) Learn More
  11. 200Tdi / 2.5TD Side Air Intake Vent Grille

    200Tdi / 2.5TD Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 200Tdi / 2.5TD Side Air Intake Vent Grille (milled aluminum) Learn More
  12. Winch Hawse Fairlead (10" w/ bottle opener)

    Winch Hawse Fairlead (10" w/ bottle opener)

    $125.00

    CNC milled aluminum winch hawse fairlead (10" mounting holes, 1.5" thick) with built-in bottle opener on the bottom. Type III hard anodized black & includes mounting hardware. Learn More
  13. Demister/Defrost Dash Vent Trim (14.5", set of 2)

    Demister/Defrost Dash Vent Trim (14.5", set of 2)

    $130.00

    CNC milled aluminum replacement defrost dash vent trim (14.5" size, set of 2) - FITS DEFENDER MODEL YEAR 1989+ Learn More
  14. Demister/Defrost Dash Vent Trim (10.5", set of 2)

    Demister/Defrost Dash Vent Trim (10.5", set of 2)

    $130.00

    CNC milled aluminum replacement defrost dash vent trim (10.5" size, set of 2) - FITS DEFENDER MODEL YEAR 1983-1988 & SERIES III 1973+ VEHICLES ONLY Learn More
  15. PREMIUM Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    PREMIUM Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $50.00

    Leather door pulls for the interior with stainless steel covers on the ends, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  16. Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $40.00

    Leather door pulls for the interior, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  17. Interior Door Pull/Grab Handles (set of 2)

    Interior Door Pull/Grab Handles (set of 2)

    $140.00

    CNC milled aluminum replacement interior door handles (SET of 2) Learn More
  18. Soft Top Clips (rear window tailgate crossbar retaining clips)

    Soft Top Clips (rear window tailgate crossbar retaining clips)

    $85.00

    Land Rover Defender rear window / rear tailgate crossbar soft-top retaining clips. Made from solid billet aluminum and powdercoated black. Learn More
  19. Seat Back Trim Rubbing Strip (set of 2)

    Seat Back Trim Rubbing Strip (set of 2)

    $95.00

    CNC milled aluminum replacement seat trim rubbing strips (SET of 2) Learn More
  20. Dash Center Face Plate Panel (VDO Gauges)

    Dash Center Face Plate Panel (VDO Gauges)

    $85.00

    Dash Center Face Plate Panel (VDO / Round Gauges) for Land Rover Defender. Learn More
  21. Dash Center Face Plate Panel (12V-Carling-12V)

    Dash Center Face Plate Panel (12V-Carling-12V)

    $85.00

    Dash Center Face Plate Panel (12V-Carling Switches-12V) for Land Rover Defender. Learn More
  22. Dash Center Face Plate Panel (6 Carling)

    Dash Center Face Plate Panel (6 Carling)

    $85.00

    Dash Center Face Plate Panel (6 Carling Switches) for Land Rover Defender. Learn More
  23. Dash Center Face Plate Panel (NAS Carling)

    Dash Center Face Plate Panel (NAS Carling)

    $85.00

    NAS 90 Dash Center Face Plate Panel (CARLING HAZARD CONFIGURATION) for Land Rover Defender. Learn More
  24. Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    $85.00

    Dash Center Face Plate Panel (VDO-3x Carling Switches-VDO) for Land Rover Defender. Learn More
  25. Dash Center Face Plate Panel (VDO-2x 12v-VDO)

    Dash Center Face Plate Panel (VDO-2x 12v-VDO)

    $85.00

    Dash Center Face Plate Panel (2x VDO / Round Gauges & 2x 12V socket) for Land Rover Defender. Learn More
  26. Dash Center Face Plate Panel (VDO-12v-VDO)

    Dash Center Face Plate Panel (VDO-12v-VDO)

    $85.00

    Dash Center Face Plate Panel (2x VDO / Round Gauges & 12V socket) for Land Rover Defender. Learn More
  27. Dash Center Face Plate Panel (NAS standard)

    Dash Center Face Plate Panel (NAS standard)

    $85.00

    NAS 90 Dash Center Face Plate Panel (milled aluminum) for Land Rover Defender. Learn More
  28. RHD Lower Dash Switch Plate Panel (3 Carling)

    RHD Lower Dash Switch Plate Panel (3 Carling)

    $45.00

    RHD [Right Hand Drive] Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More
  29. LHD Lower Dash Switch Plate Panel (3 Carling)

    LHD Lower Dash Switch Plate Panel (3 Carling)

    $45.00

    NAS [North American Spec] or LHD (Left Hand Drive) Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More
  30. High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    $4.00

    This replacement bolt corresponds to the original Land Rover part number ALR5549, and these are stainless steel replacements used to attach a NAS roll cage to a Defender. Please note that this replacement hardware is a HIGH TENSILE STAINLESS STEEL in Grade A2-80 providing a minimum tensile strength of approximately 115,000 psi. Available in bare stainless or black oxide finish. Price per piece, optional add-on replacement nyloc nut & isolating washers also available. Learn More
  31. Window Grille for Land Rover Defender 90/110 Station Wagon

    Window Grille for Land Rover Defender 90/110 Station Wagon

    $200.00

    Window grille, for Land Rover Defender 90/110 Station Wagon (SW), for the rear side windows. Made from anodized aluminum and powdercoated black. Please note price is per side/unit, so (2) will be required to fit a standard Station Wagon configuration. Includes mounting rivets, but please also see our alternative "Security mounting kit" for the window grilles that include security-head Torx screws & mounting rivnuts. Learn More
  32. Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)

    Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)

    $125.00

    Stainless Steel screw set to do the Door Hinges ONLY for a Land Rover Defender 90 NAS (North American Spec) Station Wagon (SW) vehicle. Includes the factory correct reproduction hardware to do (1) set of front doors and the rear SW door only. Also includes anti-seize paste. Learn More
  33. LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

    LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

    $125.00

    LR3 / LR4 / Discovery 1 & 2: 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  34. Defender 90/110 INTERIOR Stainless Hardware Kit

    Defender 90/110 INTERIOR Stainless Hardware Kit

    $125.00

    This is an INTERIOR ONLY stainless steel bolt/screw hardware kit to fit a Land Rover Defender 90/110, and contains approximately 360 pieces. All bolt packages are clearly labeled and packaged for ease of installation (16 separate packages). The kit includes stainless hardware for: Lower Dash, Instrument Panel, Heater Controls & Center Dash, Dash & Visors, Demister/Defrost Vents, Windshield Pillars, Driver Side End Cap, Tray Trim, Door Panels (ST), Check Strap & Cover, Kick Panel Trim., Floor Pans, Door Sills, Rear Fender Brackets, Seat Rail Bolts, Rear Door Trim (if applicable). Learn More
  35. Defender 2nd Row Doors Window Vents (set of 2)

    Defender 2nd Row Doors Window Vents (set of 2)

    $125.00

    Defender 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  36. Defender & Series II/IIA/III Stainless Steel Vent Hinge Pins

    Defender & Series II/IIA/III Stainless Steel Vent Hinge Pins

    $35.00

    A set of 4 Defender Stainless Steel Vent Hinge Pins, this kit contains (4) total pins/screws with (10) total nuts - 2 extras are included as a bonus. These Vent Hinge Pins will fit all pre-2007 model year Defenders. Will also fit Series II / IIA / III vehicles. Learn More
  37. Defender 90 SW Stainless Hardware Kit (Exterior)

    Defender 90 SW Stainless Hardware Kit (Exterior)

    $175.00

    This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  38. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    $200.00

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  39. "DEFENDER" Tire Cover (soft vinyl)

    "DEFENDER" Tire Cover (soft vinyl)

    $100.00

    Land Rover "DEFENDER" Soft Vinyl Tire Cover. Various sizes available. Learn More
  40. Seat cushion clips for Defender seats

    Seat cushion clips for Defender seats

    $30.00

    The solution for the worn retaining clips of the removable seat cushion of the Land Rover Defender original seats - not available separately at Land Rover. Includes (1) pair of seat cushion clips, enough for 1 seat. Learn More
  41. Defender Footwell Panels [***3-4 WEEK PRODUCTION LEAD-TIME***]

    Defender Footwell Panels [***3-4 WEEK PRODUCTION LEAD-TIME***]

    $95.00

    [THIS ITEM IS CUSTOM MADE TO ORDER BASED ON VEHICLE CONFIGURATION, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 3-4 WEEKS.]. Aluminum panels to replace the missing or worn out stock cardboard units. Panels are made from sturdy .063 aluminum plate that is waterjet cut. Panels are currently available for all NAS and LHD (Left-Hand Drive) models (90's, 110’s, and 130's). RHD (Right-Hand Drive) panels are NOT available yet, but are coming soon. Learn More
  42. NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    $475.00

    [THIS ITEM IS CUSTOM MADE TO ORDER, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 3-6 WEEKS]. These crossbars run from the front side rollbars on a NAS (North American Spec) Defender and allow roof racks, baskets, and similar to be mounted safely to the top of your vehicle (note: rack and/or basket NOT included). These units are constructed from 1-1/2" steel tubing, and utilize custom fabrication collar clamps and mounts to secure them in place. Available in two finishes - painted black or powdercoated black (add +2 week to lead-time for powdercoating). Note: our painted *AND* powdercoated versions have a very slight texture to it, which helps to resist marring when mounting baskets/etc on and off from the bars. Learn More
  43. Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    $130.00

    This proprietary rubberized window channel replaces the inferior factory felt lining in Land Rover Defender removable door tops and eliminates the famous glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  44. Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    $130.00

    This unique rubberised extrusion replaces the factory felt lining in Land Rover Defender rear sliding windows and eliminates the irritating glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  45. Garrison Underseat Storage Case SE

    Garrison Underseat Storage Case SE

    $80.00

    Introducing the innovative Land Rover Defender Underseat Storage Case from Garrison Outfitters®. These cases have been custom designed to fit securely under your Land Rover Defender seat bases to pack additional storage into your vehicle cabin. Secured with 3M® Dual Lock fasteners and Velcro® One-Wrap® straps, these cases install in seconds without the need for tools or modification to your vehicle. Learn More
  46. CargoBear - Modular Roof Rack System for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    $1,500.00

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powder-coated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.35" (60mm) above the roof height, making them one of the thinnest roof racks on the market. Thanks to the lashing rails, you can flexibly secure a roof load anywhere on the rack. Each section is equipped with three plates of coated diamond plate, which can be used and left installed as the "floor" - but not required (in other words you can leave the plates out of the rack, so just the rails are in place with no floor). Whether you need a full-length carrier for your 110 Defender or just a short platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  47. CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

    CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

    $40.00

    Connector Bar for LED light-bar or similar. Can be used on the front of the rack, either offset to the side(s) OR in the center on the front of the rack (see technical drawings). Suitable for universal accessories such as light bars or similar. Supplied *without* side brackets necessary for mounting (2 required) and without auxiliary lights. Please order the mounting brackets separately here: CargoBear Brackets for Connector Bar (2 brackets required per Connector Bar). Learn More
  48. CargoBear Bracket for 'Connector Bar' or smaller worklights (EACH BRACKET SOLD INDIVIDUALLY)

    CargoBear Bracket for 'Connector Bar' or smaller worklights (EACH BRACKET SOLD INDIVIDUALLY)

    $20.00

    Brackets for the CargoBear Connector Bar (2 required for each Connector Bar), or to be used for additional smaller worklights / auxiliary lights. Each Bracket sold separately. Made from stainless steel and powdercoated black. Learn More
  49. CargoBear - Modular Roof Rack System for Land Rover LR3 / LR4 [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Land Rover LR3 / LR4 [***4-6 WEEK LEAD-TIME***]

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powdercoated. They are completely separable - and infinitely flexible to configure to your desired needs. With the integrated L-track airline lashing points in the roof rack rails, you can flexibly secure a roof load anywhere on the rack. Whether you need a full-length carrier for your LR3/LR4 or just a short "three-quarter rack" platform, the CargoBear is optimally tuned and adjustable to your requirements. hether you need a full-length carrier for your LR3/LR4 or just a short "three-quarter rack" platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  50. Handle for CargoBear system roof rack

    Handle for CargoBear system roof rack

    $90.00

    This is a Handle for the CargoBear system roof rack, which gives a convenient grab location for accessing your roof rack, roof top tent, or similar. The handle is made of alumuminum and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per (1), and includes the mounting hardware. Learn More
  51. CargoBear CB Antenna Bracket

    CargoBear CB Antenna Bracket

    $25.00

    The CargoBear CB Antenna bracket allows the installation of any exterior antenna. The bracket is made of stainless steel and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per bracket (1), and does not include antenna. Learn More
  52. CargoBear Auxiliary / Worklight Bracket (EACH BRACKET SOLD INDIVIDUALLY)

    CargoBear Auxiliary / Worklight Bracket (EACH BRACKET SOLD INDIVIDUALLY)

    $35.00

    The CargoBear auxiliary / worklight bracket allows the installation of additional lights, such as fog lights, flood or spot lights, rear worklights, etc. The worklight brackets are made of stainless steel and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per bracket (1), and does not include lights. Learn More
  53. Lashing rail fitting, double stud

    Lashing rail fitting, double stud

    $7.00

    Double Stud Fitting for Airline Cargo lashing rails, load capacity 2425lbs (1100kg), ring diameter 1.57" (40mm). Units are manufactured to ISO 9788 specs, made from galvanized steel and are UV and salt water resistant. For use with the CargoBear Roof Rack system. Learn More
  54. CargoBear Awning Holder Bracket Set (4 PIECE SET)

    CargoBear Awning Holder Bracket Set (4 PIECE SET)

    $100.00

    The CargoBear awning holder allows the installation of numerous awnings or awnings on the CargoBear Roof Rack. At least two (2) CargoBear *Crossbars* are required for assembly. The 4-piece set is delivered including the required mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included. Learn More
  55. CargoBear Quick-Mounting Tent Frame

    CargoBear Quick-Mounting Tent Frame

    $450.00

    The roof-top quick-change system consists of two stainless steel frames (an upper and lower part). The lower part is powder-coated black and is attached to the vehicle, the top of the frame is mounted on the tent. This system is suitable for all roof racks, and the assembly and disassembly takes place quickly - only four screws have to be removed. Additionally, because of the even geometric nature of the tent frame, the tent can also be easily rotated at a 90 ° angle for changing the opening/access from front of the rack to side (or vice-versa). Learn More
  56. Side storage locker/box for Land Rover Defender 110 (stainless steel & black powdercoated - fits back left of vehicle)

    Side storage locker/box for Land Rover Defender 110 (stainless steel & black powdercoated - fits back left of vehicle)

    Regular Price: $650.00

    Special Price $600.00

    Our storage locker offers a significant increase in storage space - which is also accessible from the outside. Ideal for storing spare parts, tools, boots, etc. The box itself is made entirely of stainless steel, waterproof and lockable. The side storage compartment is mounted on the Land Rover Defender 110 4- and 2-door in the rear left fender or the 2-door in the sides (fits 1992 and later vehicles....sorry, will not fit a Defender 90). Learn More
  57. Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Regular Price: $125.00

    Special Price $115.00

    Stainless steel mud flap mounts/brackets for Land Rover Defender 110/130 (all model years), for left and right rear tires (mirror inverted). Supplied as a set of 2, in bare stainless steel, dimensions approx. 17" x 4.75" x 2.5" (440x120x65mm). Learn More
  58. Axle bridge joint (A-arm / A-frame ball joint) greasable with 45° operating range

    Axle bridge joint (A-arm / A-frame ball joint) greasable with 45° operating range

    $175.00

    A-frame ball joint with 45° working range, for improved articulation of the rear axle, with integrated grease zerk fitting, suitable for Land Rover Defender 90/110/130, Discovery and Range Rover Classic.

    The axle link replaces the original part and offers a much higher articulation due to its 45° operating range (compared to approx. 30° with the original part). The joint can be used with the standard running gear, or with lifted suspension systems and also with cranked trailing arm links. Learn More
  59. LT230 Transfer Case Increased Capacity Sump Cover

    LT230 Transfer Case Increased Capacity Sump Cover

    $275.00

    Increased capacity (21oz) sump cover designed for the Land Rover LT230 transfer case, CNC milled from a solid block of aircraft grade aluminum. Compatible with all model years of the Land Rover Defender and Discovery, and will fit either diesel or V-8 motors, and has a "blank" pocket milled into the side of the unit for folks that may want to drill and tap an oil temperature gauge sending unit. Learn More
  60. "Heavy Duty" Rotor Arm for Land Rover V8 (3.9L, 3.5L) Distributor

    "Heavy Duty" Rotor Arm for Land Rover V8 (3.9L, 3.5L) Distributor

    $20.00

    This is an *upgraded* distributor/ignition rotor arm for the Land Rover 3.9L/3.5L V8, to fit the 1993 NAS 110, 1994/1995 NAS 90, Discovery 1, or Range Rover Classic. Learn More
  61. Weld-In Fill Plug for differential/axle housing (includes plug) - Series/Defender/Discovery/RRC

    Weld-In Fill Plug for differential/axle housing (includes plug) - Series/Defender/Discovery/RRC

    $40.00

    This is a weld-in steel fill plug bung for a Defender/Discovery/RRC axle housing, for use in either replacing a factory fill plug hole or for upgrading to "sewer cap" axle covers. Includes (1) machined fill plug 'bung' and also includes (1) fill plug [Land Rover part# 608246]. Learn More
  62. High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    $225.00

    High Torque Gear Reduction Starter for the Land Rover trucks. This modern starter will amaze you every time you turn the key...no longer will you have to cross your fingers, and hope that your truck will start (either in the driveway, or out on the trail). Learn More
  63. Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)

    Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)

    Regular Price: $275.00

    Special Price $250.00

    Upgraded silicone replacement for the Intake Plenum Hose (original part #ESR1316) for the 1993/1994/1995/1997 NAS (North American Spec) Land Rover Defender 90/110 with the 3.9L or 4.0 EFI V8 motor. These replacement hoses are constructed from a 4-layer heavy duty silicone that is ~5mm (3/16") thick, and can withstand temperature ranges from -50F to +350F. Unit comes with (2) hose clamps for easy installation. Learn More
  64. Dorman Clutch Master Cylinder Conversion Kit

    Dorman Clutch Master Cylinder Conversion Kit

    $175.00

    We have modified a cast-iron Dorman master cylinder that is much more robust than the factory master cylinder, and significantly less prone to the inner wall wearing. This replaces the original Land Rover Clutch Master Cylinder, and our direct drop-in replacement kit includes the modified Dorman Clutch Master Cylinder, new pushrod with stainless hardware, and a braided stainless steel line to replace the factory "hard line" running from the master cylinder to the junction/union located on the bulkhead wall. Fit's late-IIA & III Series (1971-1984) and pre-Puma Defender (1983-2006). Learn More
  65. Defender Stainless Steel Spare Tire Carrier for Station Wagon

    Defender Stainless Steel Spare Tire Carrier for Station Wagon

    $1,300.00

    Stainless Steel Spare Tire Carrier for Land Rover Defender Station Wagon (SW) vehicles. Mounts on the rear crossmember and bolts through the door, and relieves the stress of the weight of the spare tire which is known over time to crack the door frame structure. The carrier is mounted on the rear cross member, and a plate is fitted to the existing holes on the rear door, and connects to the unit by means of two stainless steel rod ends with the carrier. Available in two colors, natural stainless steel or black powdercoat. Learn More
  66. Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top [***4-6 WEEK LEAD-TIME***]

    Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top [***4-6 WEEK LEAD-TIME***]

    $1,300.00

    To remove the spare tire from the interior of the Land Rover Defender Pickup (DCPU) or Soft-Top vehicle, and to keep the classic Defender look, we have adapted our proven spare wheel carrier to fit the pickup configuration. This swing-away tire carrier is opened independently of the tailgate, is rattle-free and completely made of stainless steel. NOTE: this will *not* fit the Defender HiCapacity (Hicap, HCPU) Pickup configuration. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  67. LR3/LR4 Stainless Steel Spare Tire Carrier [***6-8 WEEK LEAD-TIME***]

    LR3/LR4 Stainless Steel Spare Tire Carrier [***6-8 WEEK LEAD-TIME***]

    Regular Price: $2,200.00

    Special Price $2,050.00

    This custom Spare Tire Carrier removes the spare tire from the underneath of the Land Rover LR3/LR4, allows for the fitment of larger than stock size spare tire, and to makes it more readily accessible as well as protects it from dirt/stones/etc. This swing-away tire carrier is rattle-free and completely made of stainless steel, and allows installation of the wheel on the rear of the vehicle. The tire carrier is bolted directly to the rear crossbeam of the vehicle for a secure fit, and please note that holes must be drilled in the original bumper for fitment of this tire carrier. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  68. Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    $115.00

    Conversion kit for all Land Rover Defender 90/110 to model year 2001 with rear station wagon door. Replaces the anchor with a special gas pressure shock with soft-stop function, which keeps the door reliably open. Learn More
  69. Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)

    Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)

    Regular Price: $175.00

    Special Price $150.00

    Conversion kit for all Land Rover Defender 90/110 all model years with rear station wagon door. This conversion kit is for mounting on the TOP on the rear door, and includes stainless steel mounting hardware. This replaces the bottom checkstrap with a TOP mount Gas Strut, with a soft-stop function that keeps the door reliably open. Damper functions properly even with our spare tire carrier mounted to the rear crossmember. Learn More
  70. Seat Risers / Rail Extensions (stainless steel, powdercoated black)

    Seat Risers / Rail Extensions (stainless steel, powdercoated black)

    $100.00

    Seat risers / rail extensions that raise the seat approximately 2" (50mm), suitable for Land Rover Defender 90/110/130 (all model years 1985-2015, except for ex-MOD/military vehicles). Made of stainless steel, black powder coated, and price is for a set to do (1) single seat - includes fastening hardware. Learn More
  71. Defender Military Snow Cowl Cover - Stainless Steel

    Defender Military Snow Cowl Cover - Stainless Steel

    $225.00

    Stainless Steel Military Snow Cowl Cover for the air intake, for Land Rover Defender 90/110/130 (all versions). Includes seal and mounting hardware. Available in natural/bare stainless steel or black powdercoated option. Learn More
  72. Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    $160.00

    Aluminum Rear Ladder for Land Rover Defender 90 & 110 Station Wagon (SW) vehicleswill also fit Series hardtop vehicles as well. Allows easy access to the roof rack, and is made from high quality aluminum and TIG welded for strength. The ladder is mounted to the rain gutter at the top utilizing the provided hardware, and does require (2) mounting holes to be drilled into the hard top. Unit weighs just under 4lbs, and is available in two colors either anodized silver or black powdercoat. Also available with *optional* rear step that bolts directly to the rear crossmember. Learn More
  73. Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Regular Price: $350.00

    Special Price $325.00

    Aluminum Steering Guard / Skid Plate and Mounting Brackets, fits ALL model years of the Land Rover Defender from 1983 to present. The units are constructed from 1/4" (6mm) aluminum high-strength alloy, and the side mounting brackets are 1/4" (6mm steel) that are galvanized and then powder coated black. Skid Plate is available in either silver anodized, or an optional black powder coated version. PLEASE NOTE: if you have a 1997 NAS 90 Defender, the mounting brackets will have to be notched slightly in order to clear the transmission cooler lines at the front of the vehicle. Learn More
  74. Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    Regular Price: $175.00

    Special Price $150.00

    Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard, fits ALL model years of the Land Rover Defender from ~1986 to present. The units are constructed from 4mm steel with a galvanized finish to protect it from corrosion, and also includes the mounting hardware. The track rod guard encloses the exposed rod and protects it from damage in rough terrain or off-road situations. Learn More
  75. Rear / 2nd Row Door Opening Angle Kit for Land Rover Defender 110 / 130

    Rear / 2nd Row Door Opening Angle Kit for Land Rover Defender 110 / 130

    $135.00

    This stainless steel door opening angle kit allows you to open the rear / second row doors on a Defender 110 or 130 Crew Cab to a maximum angle of 95°. This provided more convenient ingress and egress for passengers, but also more room to access and load gear in and out of the rear doors (coolers, fridges, storage cases, etc). Easy installation with no drilling required, as it bolts to the original mounting points. Fits all model years of the Land Rover Defender 1983-present. Learn More
  76. Lug nut set (23 pieces), galvanized & black passivate plated

    Lug nut set (23 pieces), galvanized & black passivate plated

    $100.00

    Steel lug nut set (23 pieces total), that are galvanized and then black passivate coated for maximum corrosion resistance. Suitable for Land Rover original steel wheels and other steel wheels, will NOT fit alloy wheels/rims. Fits Defender, Series 2A/3, Discovery 1, and Range Rover Classic. Lugs are same fit as Land Rover part# 576103, RRD500010. Learn More
  77. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $275.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  78. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender

    $145.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) Mounting Screw Kits, enough to do a full set of headlights for one vehicle. The Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  79. LED Interior Light for Land Rover Defender (Warm White)

    LED Interior Light for Land Rover Defender (Warm White)

    $135.00

    LEDs are not only popular in headlights and signal lamps, but also advantageous in the interior of the vehicle. The LED interior light is a simple "plug and play exchange" for the existing interior lights (front or rear) of the Land Rover Defender SW. Simply remove the original cover and the lamp of the previous factory unit (AMR3155) are removed, install the LED unit, and all previous functions of the interior light (on / off / door opening) are retained. In addition, the lighting can be switched over to a "red light" to preserve night vision (activated via the red push button). If the interior light is switched off, it will accept the last selected light color the next time the lamp is switched on. Learn More
  80. Defender Cubby Box Console Base / Security Console

    Defender Cubby Box Console Base / Security Console

    $325.00

    Cubby Box Console Base / Security Console for all Land Rover Defender 90/110/130 (all years), the unit mounts below the factory cubby box / center console, and has a concealed lock to ensure safety & security of the contents. The Console Base will raise the console approximately 5” to provide a better arm rest height while also giving additional discreet storage beneath the cubby. Available with optional Blue Sea 12V and USB sockets, and/or 20amp rocker switches. Learn More
  81. Spacers for rear axle sway bar, for Defender 90/110/130

    Spacers for rear axle sway bar, for Defender 90/110/130

    $85.00

    The spacers prevent folding of the rear stabilizer sway bar for higher/lifted vehicles. Fits all model years Land Rover Defender 90/110/130 (*except* 1994/95/97 NAS 90). Spacers made from stainless steel, and includes required mounting hardware. Learn More
  82. Webasto air diffuser, rotatable, with 60mm connection

    Webasto air diffuser, rotatable, with 60mm connection

    $30.00

    Rotating air outlet, with 60mm connection, suitable for a wide range of heating systems from Webasto, Eberspächer and Planar. Learn More
  83. Cubby Box Heater Base

    Cubby Box Heater Base

    $250.00

    Allows the installation of a stand-alone heater underneath the Cubby box, making it a comfortable armrest. Available with 12V sockets and / or USB charging sockets. Learn More
  84. Mounting Plate for heater

    Mounting Plate for heater

    $75.00

    Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More
  85. Door Pads for Land Rover Defender

    Door Pads for Land Rover Defender

    Regular Price: $110.00

    Special Price $100.00

    Armrest for the door of the Land Rover Defender 90/110/130, covered with elaborate aluminum substructure, with naturally tanned leather (black), either for the right or left side. Learn More
  86. Land Rover Defender (or Series) Keychains

    Land Rover Defender (or Series) Keychains

    $40.00

    Land Rover Keychains a nice complement to any Land Rover Defender or Series truck (or any other Rover model!) to proudly display your keys. Available in either the "Solihull" or "Four Wheel Drive Station Wagon" configuration [options selected at checkout]. Keychain tag measures approximately 2" long, and includes a 1" keyring. Learn More
  87. "Land Rover Tithonus" Oval Badge (Cast Aluminum)

    "Land Rover Tithonus" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  88. "Land Rover Four Wheel Drive Station Wagon" Oval Badge (Cast Aluminum)

    "Land Rover Four Wheel Drive Station Wagon" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  89. "Land Rover 130" Oval Badge (Cast Aluminum)

    "Land Rover 130" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  90. "Land Rover 110" Oval Badge (Cast Aluminum)

    "Land Rover 110" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  91. "Land Rover 90" Oval Badge (Cast Aluminum)

    "Land Rover 90" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  92. "Land Rover Solihull" Oval Badge (Cast Aluminum)

    "Land Rover Solihull" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 2-13/16" high x 3/16" thick. Learn More
  93. Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    $75.00

    These embossed aluminum signs are the *exact* specifications that were used in the Camel Trophy event on the vehicles racks, and are supplied from the company that manufactured the vehicle plates for the Camel Trophy event originally from 1980-1998. Learn More
  94. 'Series-Defender Outfitters' wall banner 55"x33"

    'Series-Defender Outfitters' wall banner 55"x33"

    $100.00

    Quality printed vinyl wall banner with hanging grommets, SDO backdrop & verbiage. Learn More
  95. [FACTORY SECONDS WITH FINISH ISSUES] Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    [FACTORY SECONDS WITH FINISH ISSUES] Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    Regular Price: $175.00

    Special Price $50.00

    PLEASE NOTE: THESE ARE BEING OFFERED AS "FACTORY SECONDS" DUE TO SLIGHT MANUFACTURING ISSUES WITH THE FONT COLOR/PAINT. THE ISSUES ARE RELATIVELY MINOR, BUT DO AFFECT THE FINISH OF THE PRODUCT. Learn More
  96. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Regular Price: $125.00

    Special Price $100.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Green & Gold oval emblem decal #DAG100330 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  97. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Regular Price: $125.00

    Special Price $100.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Black & Silver oval emblem decal #DAG500140 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  98. "Bloody Knuckles Brotherhood: Member" Round 3-inch Metal Grille Badge

    "Bloody Knuckles Brotherhood: Member" Round 3-inch Metal Grille Badge

    $50.00

    Metal Grille badge with hard enamel cloisonne finish in a 3" diameter size with two 3/16" cut outs for mounting. Learn More
  99.  "Bloody Knuckles Brotherhood" PATCH velcro-backed, 2-5/8"

    "Bloody Knuckles Brotherhood" PATCH velcro-backed, 2-5/8"

    $8.00

    Round embroidered Velcro-backed patch bearing the "Bloody Knuckles Brotherhood" logo. Includes both the velcro-hook backing (on the patch) as well as the round velcro-hoop blank for mounting. Measures 2-5/8" in diameter. Learn More
  100. "Land Rover 127" decal for upper grille panel (layered silver over black vinyl)

    "Land Rover 127" decal for upper grille panel (layered silver over black vinyl)

    $10.00

    Reproduction decal for the front upper grille panel / surround on a Land Rover 127, made from layered silver over black vinyl. Measures 11-1/4" x 1-3/8". Learn More

Items 1 to 100 of 134 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction