Custom Land Rover Series & Defender Parts

Search results for 'Front grill'

36 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. 300Tdi/Td5/Puma Side Air Intake Vent Grille

    300Tdi/Td5/Puma Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 300Tdi / Td5 / Puma Side Air Intake Vent Grille (milled aluminum) Learn More
  2. Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

    Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

    $300.00

    Stamped 16-gauge aluminum sheet made from aluminum, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 without air conditioning, and late Series IIA/III trucks (with the headlights in the wings). Learn More
  3. LED Interior Light for Land Rover Defender (Warm White)

    LED Interior Light for Land Rover Defender (Warm White)

    $135.00

    LEDs are not only popular in headlights and signal lamps, but also advantageous in the interior of the vehicle. The LED interior light is a simple "plug and play exchange" for the existing interior lights (front or rear) of the Land Rover Defender SW. Simply remove the original cover and the lamp of the previous factory unit (AMR3155) are removed, install the LED unit, and all previous functions of the interior light (on / off / door opening) are retained. In addition, the lighting can be switched over to a "red light" to preserve night vision (activated via the red push button). If the interior light is switched off, it will accept the last selected light color the next time the lamp is switched on. Learn More
  4. CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

    CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

    $40.00

    Connector Bar for LED light-bar or similar. Can be used on the front of the rack, either offset to the side(s) OR in the center on the front of the rack (see technical drawings). Suitable for universal accessories such as light bars or similar. Supplied *without* side brackets necessary for mounting (2 required) and without auxiliary lights. Please order the mounting brackets separately here: CargoBear Brackets for Connector Bar (2 brackets required per Connector Bar). Learn More
  5. Defender 90/110 Door Hinge Stainless Hardware (Front Doors & Tailgate)

    Defender 90/110 Door Hinge Stainless Hardware (Front Doors & Tailgate)

    $85.00

    Complete set of screws for 2 doors and tailgate - Land Rover Defender 90 / 110. Includes the hardware to do (1) set of front doors & tailgate. Also includes anti-seize paste. Learn More
  6. Window Grille for Land Rover Defender 90/110 Station Wagon [***4-6 WEEK LEAD-TIME***]

    Window Grille for Land Rover Defender 90/110 Station Wagon [***4-6 WEEK LEAD-TIME***]

    $200.00

    Window grille, for Land Rover Defender 90/110 Station Wagon (SW), for the rear side windows. Made from anodized aluminum and powdercoated black. Please note price is per side/unit, so (2) will be required to fit a standard Station Wagon configuration. Includes mounting rivets, but please also see our alternative "Security mounting kit" for the window grilles that include security-head Torx screws & mounting rivnuts. Learn More
  7. Security Mounting Kit for 90/110 SW Window Grille

    Security Mounting Kit for 90/110 SW Window Grille

    $32.50

    Optional security mounting kit for the Window Grilles for the Land Rover Defender 90/110 Station Wagon. Kit consists of security-head Torx screws, mounting rivnuts, and Torx bit. Please note the price for the kit is per *each* unit/grille, (2) mounting kits required to do both windows for a Station Wagon configuration. Learn More
  8. Defender 110 Door Hinge Stainless Hardware (Front Doors, Second Row Doors & Rear Door)

    Defender 110 Door Hinge Stainless Hardware (Front Doors, Second Row Doors & Rear Door)

    $135.00

    Complete set of screws for 4 doors and tailgate - Land Rover Defender 110. Includes the hardware to do (1) set of front doors, (1) set of 2nd row doors, & rear door. Also includes anti-seize paste. Learn More
  9. Defender Headlight Surrounds (set of 2)

    Defender Headlight Surrounds (set of 2)

    $750.00

    These are replacement headlight bezel finisher/surrounds for a Land Rover Defender, CNC milled from a one-piece 3" thick block of billet aluminum. These are a perfect complement to our SDO Defender Front Grille, and are likewise powdercoated black for a durable finish. Available with three different design options for the area between the marker lights & turn-signal lights - SOLID, VENTED, or POCKET MILLED. The factory headlight surrounds are extremely flimsy plastic, and tend to crack, break, and become brittle over time. Our solid aluminum headlight surrounds are a great upgrade to any Defender, and a durable solution that will last a lifetime. Learn More
  10. Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)

    Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)

    $125.00

    Stainless Steel screw set to do the Door Hinges ONLY for a Land Rover Defender 90 NAS (North American Spec) Station Wagon (SW) vehicle. Includes the factory correct reproduction hardware to do (1) set of front doors and the rear SW door only. Also includes anti-seize paste. Learn More
  11. Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat)

    Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat)

    $275.00

    Stamped 16-gauge aluminum sheet (~0.05" thick), and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 with air conditioning (NOTE: also fits the standard/stock Defender front end of vehicles *without* the A/C bumpout). Learn More
  12. CargoBear 2.0 - Modular Roof Rack System for Mercedes G-Wagen  [***4-6 WEEK LEAD-TIME***]

    CargoBear 2.0 - Modular Roof Rack System for Mercedes G-Wagen [***4-6 WEEK LEAD-TIME***]

    $1,950.00

    The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powdercoated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.75" (70mm) above the roof height, making them one of the thinnest roof racks on the market. Whether you need a full-length carrier for your G-Wagen or just a shorter "1/3 rack" or "2/3 rack" platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  13. NAS Soft-Top Rear Speaker Panels

    NAS Soft-Top Rear Speaker Panels

    $225.00

    These are replacement speaker housings for the North American Specification (NAS) Defender 90 Soft-Top models, to replace original part #AWR1550LNF and AWR1551LNF. The apertures within the housing will accept a 5.25" speaker and include the slots for the rear seatbelt trim/insert, and the speaker housings can also be trimmed slightly to also accept a 6.5" speaker (as pictured). Also available in a speaker "blank" with no cutout as well. Learn More
  14. "Land Rover" Mini Grille Badge (Cast Aluminum) Series Defender

    "Land Rover" Mini Grille Badge (Cast Aluminum) Series Defender

    $60.00

    This is a smaller/miniature 'Land Rover' badge, cast in high quality aluminum with a powdercoated finish for durability. Measures 5-1/2" long x 2-1/8" high x 3/16" thick. Please take note that the rivet mounting holes are slightly offset (under the "L" and above the "R" in Land Rover). Learn More
  15. CargoBear 2.0 - Modular Roof Rack System for Land Rover Defender [***4-8 WEEK LEAD-TIME***]

    CargoBear 2.0 - Modular Roof Rack System for Land Rover Defender [***4-8 WEEK LEAD-TIME***]

    $1,750.00

    The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powdercoated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.35" (60mm) above the roof height, making them one of the thinnest roof racks on the market. Learn More
  16. Defender Console - Upper Dash Mount (Radio Housing)

    Defender Console - Upper Dash Mount (Radio Housing)

    $75.00

    Recreated from the original Defender radio console/tray for those Land Rover owners looking to retain a classic factory-fitted appearance to their radio installation, install auxiliary gauges, switches, CB, or similar. Learn More
  17. Extended (wide) wheel arches / fender flares for Land Rover Defender (Set of 4) [***4-8 WEEK LEAD-TIME***]

    Extended (wide) wheel arches / fender flares for Land Rover Defender (Set of 4) [***4-8 WEEK LEAD-TIME***]

    $750.00

    Extended / wider fender flare arches you gain an additional ~1.25" of cover, suitable for fitting larger tires/etc to a Land Rover Defender through Model Year 2016. Learn More
  18. CargoBear Quick-Mounting Tent Frame

    CargoBear Quick-Mounting Tent Frame

    $450.00

    The roof-top quick-change system consists of two stainless steel frames (an upper and lower part). The lower part is powder-coated black and is attached to the vehicle, the top of the frame is mounted on the tent. This system is suitable for all roof racks, and the assembly and disassembly takes place quickly - only four screws have to be removed. Additionally, because of the even geometric nature of the tent frame, the tent can also be easily rotated at a 90 ° angle for changing the opening/access from front of the rack to side (or vice-versa). Learn More
  19. Defender Cubby Box Console Base / Security Console

    Defender Cubby Box Console Base / Security Console

    $350.00

    Cubby Box Console Base / Security Console for all Land Rover Defender 90/110/130 (all years), the unit mounts below the factory cubby box / center console, and has a concealed lock to ensure safety & security of the contents. The Console Base will raise the console approximately 5” to provide a better arm rest height while also giving additional discreet storage beneath the cubby. Available with optional Blue Sea 12V and USB sockets, and/or 20amp rocker switches. Learn More
  20. 200Tdi / 2.5TD Side Air Intake Vent Grille

    200Tdi / 2.5TD Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 200Tdi / 2.5TD Side Air Intake Vent Grille (milled aluminum) Learn More
  21. Youth T-Shirt: Royal Blue-Youth XS (2-4)

    Youth T-Shirt: Royal Blue-Youth XS (2-4)

    $15.00

    Youth T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. NOTE: FOR CHILDREN / YOUTH ONLY. Learn More
  22. Defender Front Grille

    Defender Front Grille

    $500.00

    This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. PLEASE NOTE: we currently have two versions of the Front Grille - one designed for those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle), and those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle). This unit is designed for those with the in-cabin bonnet pull cable, if you require the other version of the Front Grille please see our other listing. Learn More
  23. Demister/Defrost Dash Vent Trim (14.5", set of 2)

    Demister/Defrost Dash Vent Trim (14.5", set of 2)

    $140.00

    CNC milled aluminum replacement defrost dash vent trim (14.5" size, set of 2) - FITS DEFENDER MODEL YEAR 1989+ Learn More
  24. "Bloody Knuckles Brotherhood: Member" Round 3-inch Metal Grille Badge

    "Bloody Knuckles Brotherhood: Member" Round 3-inch Metal Grille Badge

    $50.00

    Metal Grille badge with hard enamel cloisonne finish in a 3" diameter size with two 3/16" cut outs for mounting. Learn More
  25. Youth T-Shirt: Bloody Knuckles Brotherhood-Youth L (14-16)

    Youth T-Shirt: Bloody Knuckles Brotherhood-Youth L (14-16)

    $20.00

    Youth T-Shirt bearing the "Bloody Knuckles Brotherhood" logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Learn More
  26. Adult T-Shirt: Heather Grey (lightweight)

    Adult T-Shirt: Heather Grey (lightweight)

    $20.00

    Adult T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Lightweight 4.5oz fabric. Learn More
  27. Adult T-Shirt: Euro-Oval "SDO" Heather Grey (lightweight)

    Adult T-Shirt: Euro-Oval "SDO" Heather Grey (lightweight)

    $20.00

    Adult T-Shirt bearing the "SDO" Euro-Oval style logo (and Series-Defender Outfitters name and website) on the back, with a smaller logo above the breast on the front. Available in various sizes. Lightweight 4.5oz fabric. Learn More
  28. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    $125.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Green & Gold oval emblem decal #DAG100330 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  29. Defender Front Grille (w/ cutout for manual bonnet latch)

    Defender Front Grille (w/ cutout for manual bonnet latch)

    $500.00

    Similar to our "standard" SDO Front Grille....BUT this particular unit is designed for those those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle and allows you to manually open the bonnet), versus those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle). This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. Learn More
  30. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Regular Price: $250.00

    Special Price $225.00

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  31. Defender 90 SW Stainless Hardware Kit (Exterior)

    Defender 90 SW Stainless Hardware Kit (Exterior)

    Regular Price: $225.00

    Special Price $200.00

    This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  32. Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Regular Price: $475.00

    Special Price $400.00

    Aluminum Steering Guard / Skid Plate and Mounting Brackets, fits ALL model years of the Land Rover Defender from 1983 to present. The units are constructed from 1/4" (6mm) aluminum high-strength alloy, and the side mounting brackets are 1/4" (6mm steel) that are galvanized and then powder coated black. Skid Plate is available in either silver anodized, or an optional black powder coated version. PLEASE NOTE: if you have a 1997 NAS 90 Defender, the mounting brackets will have to be notched slightly in order to clear the transmission cooler lines at the front of the vehicle. Learn More
  33. Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    $175.00

    Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard, fits ALL model years of the Land Rover Defender from ~1986 to present. The units are constructed from 4mm steel with a galvanized finish to protect it from corrosion, and also includes the mounting hardware. The track rod guard encloses the exposed rod and protects it from damage in rough terrain or off-road situations. Learn More
  34. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $350.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  35. Seat Risers / Rail Extensions (stainless steel, powdercoated black)

    Seat Risers / Rail Extensions (stainless steel, powdercoated black)

    $115.00

    Seat risers / rail extensions that raise the seat approximately 2" (50mm), suitable for Land Rover Defender 90/110/130 (all model years 1985-2015, except for ex-MOD/military vehicles). Made of stainless steel, black powder coated, and price is for a set to do (1) single seat - includes fastening hardware. Learn More
  36. CargoBear Wind Deflector for Defender - CargoBear roof racks

    CargoBear Wind Deflector for Defender - CargoBear roof racks

    $230.00

    Front 'Wind Deflector' to fit the CargoBear 1.0/2.0 for the Land Rover Defender. Made from aluminum and powdercoated black, includes mounting hardware. Learn More

36 Item(s)

per page

List  Grid 

Set Ascending Direction