Custom Land Rover Series & Defender Parts

Search results for 'Rack'

35 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Wingtop Vents (standard SET)

    Wingtop Vents (standard SET)

    $190.00

    CNC milled aluminum replacement wingtop vents (SET) Learn More
  2. CargoBear Bracket for 'Connector Bar' or smaller worklights (EACH BRACKET SOLD INDIVIDUALLY)

    CargoBear Bracket for 'Connector Bar' or smaller worklights (EACH BRACKET SOLD INDIVIDUALLY)

    $20.00

    Brackets for the CargoBear Connector Bar (2 required for each Connector Bar), or to be used for additional smaller worklights / auxiliary lights. Each Bracket sold separately. Made from stainless steel and powdercoated black. Learn More
  3. Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Regular Price: $125.00

    Special Price $100.00

    Stainless steel mud flap mounts/brackets for Land Rover Defender 110/130 (all model years), for left and right rear tires (mirror inverted). Supplied as a set of 2, in bare stainless steel, dimensions approx. 17" x 4.75" x 2.5" (440x120x65mm). Learn More
  4. Defender Headlight Surrounds (set of 2)

    Defender Headlight Surrounds (set of 2)

    $750.00

    These are replacement headlight bezel finisher/surrounds for a Land Rover Defender, CNC milled from a one-piece 3" thick block of billet aluminum. These are a perfect complement to our SDO Defender Front Grille, and are likewise powdercoated black for a durable finish. Available with three different design options for the area between the marker lights & turn-signal lights - SOLID, VENTED, or POCKET MILLED. The factory headlight surrounds are extremely flimsy plastic, and tend to crack, break, and become brittle over time. Our solid aluminum headlight surrounds are a great upgrade to any Defender, and a durable solution that will last a lifetime. Learn More
  5. Handle for CargoBear system roof rack

    Handle for CargoBear system roof rack

    $90.00

    This is a Handle for the CargoBear system roof rack, which gives a convenient grab location for accessing your roof rack, roof top tent, or similar. The handle is made of alumuminum and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per (1), and includes the mounting hardware. Learn More
  6. ANR Classic Steel Rim 16" x 8" [***PREORDER SPECIAL PRICING ONLY, 4-6 WEEK LEAD-TIME***]

    ANR Classic Steel Rim 16" x 8" [***PREORDER SPECIAL PRICING ONLY, 4-6 WEEK LEAD-TIME***]

    Regular Price: $300.00

    Special Price $250.00

    ANR Classic 16" x 8" steel rim, based on the popular original ANR1534 steel wheel that came stock on NAS 110s and Defender 130s, but with an 8" rim width to accommodate larger tires if desired. These ANR rims will fit on various years of Defender 90/110/130s, Series trucks, Discovery 1's, and Range Rover Classics that share the same bolt pattern. Classic in design, versatile in use, strong in performance....the ANR Classic 16x8 refines almost every Defender look. These rims have a zero offset to ensure a discreetly wider track and the selection of suitable tire sizes also guarantees a wide range of options in terms of performance. These are DOT approved & stamped. Learn More
  7. RAM Mount ball and adapter for Land Rover Defender Td4/Puma (from MY2007)

    RAM Mount ball and adapter for Land Rover Defender Td4/Puma (from MY2007)

    Regular Price: $75.00

    Special Price $65.00

    Easy to fit (1") RAM Mount ball adapter, replaces the original bolt from the passenger-side grab bar/handle, for all Land Rover Defender Td4/Puma (from model year 2007). Extremely sturdy, and easy to remove...and once fitted will allow you to fasten a smartphone, tablet, GoPro, GPS, CB, iPad, or any similar device using standard RAM mount brackets. Learn More
  8. CargoBear - Crossbar - for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    CargoBear - Crossbar - for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    $600.00

    If you do not need an entire roof rack on your Land Rover Defender because you only want to mount a roof tent on two cross beams, for example, the CargoBear crossbars are ideal! They are identical to the cross bars of the CargoBear Roof Rack. Learn More
  9. Aluminum Rear Step Station Wagon (black powdercoat) - Land Rover Defender 90/110

    Aluminum Rear Step Station Wagon (black powdercoat) - Land Rover Defender 90/110

    $180.00

    Aluminum Rear Step for Land Rover Defender 90 & 110 Station Wagon (SW) vehicles. Allows easy access to the roof rack or ladder, and is made from high quality aluminum powdercoated black. Unit bolts directly to the rear crossmember, and includes all necessary mounting hardware & brackets Learn More
  10. CargoBear 2.0 - Modular Roof Rack System for Mercedes G-Wagen  [***4-6 WEEK LEAD-TIME***]

    CargoBear 2.0 - Modular Roof Rack System for Mercedes G-Wagen [***4-6 WEEK LEAD-TIME***]

    $1,950.00

    The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powdercoated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.75" (70mm) above the roof height, making them one of the thinnest roof racks on the market. Whether you need a full-length carrier for your G-Wagen or just a shorter "1/3 rack" or "2/3 rack" platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  11. CargoBear wind deflector for Mercedes G-Wagen rack

    CargoBear wind deflector for Mercedes G-Wagen rack

    $250.00

    Wind deflector suitable for Cargobear 2.0 Mercedes G-Wagen Rack. Learn More
  12. Land Rover Series II/IIA "Packing Piece" Spacer for Slave Cylinder (#544686)

    Land Rover Series II/IIA "Packing Piece" Spacer for Slave Cylinder (#544686)

    $35.00

    Unique to the Land Rover Series II/IIA vehicles with the 'upright' Slave Cylinder, this spacer (officially referred to as the "Packing Piece", original factory part #544686) is NLA. Made from 6061 aluminum and powdercoated gray. Learn More
  13. Land Rover Series II/IIA Bulkhead "Clutch Hose Bracket" (#277303)

    Land Rover Series II/IIA Bulkhead "Clutch Hose Bracket" (#277303)

    $15.00

    This is the bulkhead Clutch Hose Bracket for the union between the flex line from the Slave Cylinder and the hardline coming over from the Master Cylinder on the Land Rover Series II/IIA vehicles (original factory part #277303) is NLA. Made from 6061 aluminum and powdercoated gray. Learn More
  14. CargoBear 2.0 - Modular Roof Rack System for Land Rover Defender [***4-8 WEEK LEAD-TIME***]

    CargoBear 2.0 - Modular Roof Rack System for Land Rover Defender [***4-8 WEEK LEAD-TIME***]

    $1,750.00

    The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powdercoated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.35" (60mm) above the roof height, making them one of the thinnest roof racks on the market. Learn More
  15. CargoBear - Rear Valence for Defender Roof Rack

    CargoBear - Rear Valence for Defender Roof Rack

    $230.00

    This CargoBear Rear Valence end plate for the Defender adds the finishing touch to the design of the already extremely attractive Roof Rack. This end plate has an integrated a handle on both sides that makes climbing the rack much easier and safer. It also extends the usable "rear area" by another 9 cm and offers additional space for attaching work LEDs, attachments, lashing points and similar. Learn More
  16. Defender Rear Station Wagon Door Gas Strut 2.0 (from MY2002) [***3-4 WEEK LEAD-TIME***]

    Defender Rear Station Wagon Door Gas Strut 2.0 (from MY2002) [***3-4 WEEK LEAD-TIME***]

    Regular Price: $150.00

    Special Price $135.00

    Conversion kit for all Land Rover Defender 90 / 110 models from Model Year 2002 with rear station wagon door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. Learn More
  17. CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

    CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

    $40.00

    Connector Bar for LED light-bar or similar. Can be used on the front of the rack, either offset to the side(s) OR in the center on the front of the rack (see technical drawings). Suitable for universal accessories such as light bars or similar. Supplied *without* side brackets necessary for mounting (2 required) and without auxiliary lights. Please order the mounting brackets separately here: CargoBear Brackets for Connector Bar (2 brackets required per Connector Bar). Learn More
  18. Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)

    Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)

    $275.00

    Upgraded silicone replacement for the Intake Plenum Hose (original part #ESR1316) for the 1993/1994/1995/1997 NAS (North American Spec) Land Rover Defender 90/110 with the 3.9L or 4.0 EFI V8 motor. These replacement hoses are constructed from a 4-layer heavy duty silicone that is ~5mm (3/16") thick, and can withstand temperature ranges from -50F to +350F. Unit comes with (2) hose clamps for easy installation. Learn More
  19. CargoBear CB Antenna Bracket

    CargoBear CB Antenna Bracket

    $25.00

    The CargoBear CB Antenna bracket allows the installation of any exterior antenna. The bracket is made of stainless steel and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per bracket (1), and does not include antenna. Learn More
  20. 300Tdi/Td5/Puma Side Air Intake Vent Grille

    300Tdi/Td5/Puma Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 300Tdi / Td5 / Puma Side Air Intake Vent Grille (milled aluminum) Learn More
  21. Soft Top Clips (rear window tailgate crossbar retaining clips)

    Soft Top Clips (rear window tailgate crossbar retaining clips)

    $95.00

    Land Rover Defender rear window / rear tailgate crossbar soft-top retaining clips. Made from solid billet aluminum and powdercoated black. Learn More
  22. 200Tdi / 2.5TD Side Air Intake Vent Grille

    200Tdi / 2.5TD Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 200Tdi / 2.5TD Side Air Intake Vent Grille (milled aluminum) Learn More
  23. Seat Back Trim Rubbing Strip (set of 2)

    Seat Back Trim Rubbing Strip (set of 2)

    $95.00

    CNC milled aluminum replacement seat trim rubbing strips (SET of 2) Learn More
  24. Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Regular Price: $475.00

    Special Price $400.00

    Aluminum Steering Guard / Skid Plate and Mounting Brackets, fits ALL model years of the Land Rover Defender from 1983 to present. The units are constructed from 1/4" (6mm) aluminum high-strength alloy, and the side mounting brackets are 1/4" (6mm steel) that are galvanized and then powder coated black. Skid Plate is available in either silver anodized, or an optional black powder coated version. PLEASE NOTE: if you have a 1997 NAS 90 Defender, the mounting brackets will have to be notched slightly in order to clear the transmission cooler lines at the front of the vehicle. Learn More
  25. Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    $175.00

    Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard, fits ALL model years of the Land Rover Defender from ~1986 to present. The units are constructed from 4mm steel with a galvanized finish to protect it from corrosion, and also includes the mounting hardware. The track rod guard encloses the exposed rod and protects it from damage in rough terrain or off-road situations. Learn More
  26. Defender Stainless Steel Spare Tire Carrier for Station Wagon

    Defender Stainless Steel Spare Tire Carrier for Station Wagon

    $1,600.00

    Stainless Steel Spare Tire Carrier for Land Rover Defender Station Wagon (SW) vehicles. Mounts on the rear crossmember and bolts through the door, and relieves the stress of the weight of the spare tire which is known over time to crack the door frame structure. The carrier is mounted on the rear cross member, and a plate is fitted to the existing holes on the rear door, and connects to the unit by means of two stainless steel rod ends with the carrier. Available in two colors, natural stainless steel or black powdercoat. Learn More
  27. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $350.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  28. Defender 90/110 INTERIOR Stainless Hardware Kit

    Defender 90/110 INTERIOR Stainless Hardware Kit

    $150.00

    This is an INTERIOR ONLY stainless steel bolt/screw hardware kit to fit a Land Rover Defender 90/110, and contains approximately 360 pieces. All bolt packages are clearly labeled and packaged for ease of installation (16 separate packages). The kit includes stainless hardware for: Lower Dash, Instrument Panel, Heater Controls & Center Dash, Dash & Visors, Demister/Defrost Vents, Windshield Pillars, Driver Side End Cap, Tray Trim, Door Panels (ST), Check Strap & Cover, Kick Panel Trim., Floor Pans, Door Sills, Rear Fender Brackets, Seat Rail Bolts, Rear Door Trim (if applicable). Learn More
  29. Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    $170.00

    Aluminum Rear Ladder for Land Rover Defender 90 & 110 Station Wagon (SW) vehicles will also fit Series hardtop vehicles as well. Allows easy access to the roof rack, and is made from high quality aluminum and TIG welded for strength. The ladder is mounted to the rain gutter at the top utilizing the provided hardware, and does require (2) mounting holes to be drilled into the hard top. Unit weighs just under 4lbs, and is available in two colors either anodized silver or black powdercoat. Also available with *optional* rear step that bolts directly to the rear crossmember. Learn More
  30. RAM Mount Adapter for Jeep Wrangler JK / JKU 2011+

    RAM Mount Adapter for Jeep Wrangler JK / JKU 2011+

    $125.00

    Easy to fit (1") RAM Mount ball adapter, replaces the original bolt from the passenger-side grab bar/handle, for all Jeep Wrangler JK and JK Unlimited (from 2011). Extremely sturdy, and easy to remove...and once fitted will allow you to fasten a smartphone, GoPro, GPS, CB, iPad, or any similar device using standard RAM mount brackets. Please note that our kit includes enough to do just 1-side of the grab handle bar, but (2) pieces can be fitted to the same handle (one left, one right). Learn More
  31. CargoBear Quick-Mounting Tent Frame

    CargoBear Quick-Mounting Tent Frame

    $450.00

    The roof-top quick-change system consists of two stainless steel frames (an upper and lower part). The lower part is powder-coated black and is attached to the vehicle, the top of the frame is mounted on the tent. This system is suitable for all roof racks, and the assembly and disassembly takes place quickly - only four screws have to be removed. Additionally, because of the even geometric nature of the tent frame, the tent can also be easily rotated at a 90 ° angle for changing the opening/access from front of the rack to side (or vice-versa). Learn More
  32. CargoBear Awning Holder Bracket Set (4 PIECE SET)

    CargoBear Awning Holder Bracket Set (4 PIECE SET)

    $100.00

    The CargoBear awning holder allows the installation of numerous awnings or awnings on the CargoBear Roof Rack. At least two (2) CargoBear *Crossbars* are required for assembly. The 4-piece set is delivered including the required mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included. Learn More
  33. Lashing rail fitting, double stud

    Lashing rail fitting, double stud

    $7.00

    Double Stud Fitting for Airline Cargo lashing rails, load capacity 2425lbs (1100kg), ring diameter 1.57" (40mm). Units are manufactured to ISO 9788 specs, made from galvanized steel and are UV and salt water resistant. For use with the CargoBear Roof Rack system. Learn More
  34. CargoBear Auxiliary / Worklight Bracket (EACH BRACKET SOLD INDIVIDUALLY)

    CargoBear Auxiliary / Worklight Bracket (EACH BRACKET SOLD INDIVIDUALLY)

    $40.00

    The CargoBear auxiliary / worklight bracket allows the installation of additional lights, such as fog lights, flood or spot lights, rear worklights, etc. The worklight brackets are made of stainless steel and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per bracket (1), and does not include lights. Learn More
  35. CargoBear Wind Deflector for Defender - CargoBear roof racks

    CargoBear Wind Deflector for Defender - CargoBear roof racks

    $230.00

    Front 'Wind Deflector' to fit the CargoBear 1.0/2.0 for the Land Rover Defender. Made from aluminum and powdercoated black, includes mounting hardware. Learn More

35 Item(s)

per page

List  Grid 

Set Ascending Direction