Search results for: 'WING'

Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

$95.00

SOLID TOP LEFT-SIDE ONLY milled aluminum wingtop vent (for Left-Hand Drive vehicles only) Learn More

Add to Wishlist

CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

$45.00

Connector Bar for LED light-bar or similar. Can be used on the front of the rack, either offset to the side(s) OR in the center on the front of the rack (see technical drawings). Suitable for universal accessories such as light bars or similar. Supplied *without* side brackets necessary for mounting (2 required) and without auxiliary lights. Please order the mounting brackets separately here: CargoBear Brackets for Connector Bar (2 brackets required per Connector Bar). Learn More

Add to Wishlist

Dash Panel & Interior Lights Wiring Harness (includes Carling Switch & Multiplug)

$65.00

Failure of the factory switch that controls the Dash Lamp/Panel Lights & Interior Lights (corresponding to original part #PRC7371, generally used on Defender vehicles through the 1994 model year) is a common issue. Our custom harness combines the reliability of the Carling Switch with an easy way to swap out your old Dash Lamp/Panel Lights & Interior Lights switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a switch that has already failed. We utilize specialty 3.0mm male pin connectors on the end of the harness that specifically mate up directly into the female openings in the Rover plug. Learn More

Add to Wishlist

High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

$225.00

High Torque Gear Reduction Starter for the Land Rover trucks. This modern starter will amaze you every time you turn the key...no longer will you have to cross your fingers, and hope that your truck will start (either in the driveway, or out on the trail). Learn More

Add to Wishlist

Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

Regular Price: $135.00

Special Price $130.00

Jeep JL Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JL Unlimited 2018- present, sold in pairs. Learn More

Add to Wishlist

LR3/LR4 Stainless Steel Spare Tire Carrier [4-6 WEEK LEAD-TIME]

$2,250.00

This custom Spare Tire Carrier removes the spare tire from the underneath of the Land Rover LR3/LR4, allows for the fitment of larger than stock size spare tire, and to makes it more readily accessible as well as protects it from dirt/stones/etc. This swing-away tire carrier is rattle-free and completely made of stainless steel, and allows installation of the wheel on the rear of the vehicle. The tire carrier is bolted directly to the rear crossbeam of the vehicle for a secure fit, and please note that holes must be drilled in the original bumper for fitment of this tire carrier. Available in two finish options, natural stainless steel or black powdercoat. Learn More

Add to Wishlist

Rear Window Vents - Jeep Cherokee XJ (1984-2001), Nissan Navara D40 (set of 2)

$135.00

The window vents fit both the Jeep Cherokee XJ (1984-2001), and the Nissan Navara D40, and are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all Jeep Cherokee XJ (1984-2001) and Nissan Navara D40, sold in pairs. Learn More

Add to Wishlist

Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2)

Regular Price: $135.00

Special Price $125.00

Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More

Add to Wishlist

Rear Door Window Vents - universal, adjustable (set of 2)

$175.00

The window vents are not vehicle specific, they can be adjusted with high quality screw caps between 17.7" to 24.6" in width and thus cover a variety of vehicle types. They are ideal for allowing air circulation without compromising security or allowing water to enter. The window vents are made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle. Sold in pairs. Learn More

Add to Wishlist

Rear Wash/Wipe Switch Wiring Harness (includes Carling Switch & Multiplug)

$85.00

Upgrading the factory wash/wipe Carling switch, from the clunky factory knob & switch (original part #PRC4454 & PRC4449) is a popular upgrade. Our harness combines the reliability of the Carling Wash/Wipe Switch with an easy way to swap out your old switch with our plug-and-play replacement. For imported / Rest of World (ROW) trucks OR North American Spec (NAS) vehicles. Learn More

Add to Wishlist

Rear Defrost Switch Wiring Harness (includes Carling Switch & Multiplug)

$45.00

Upgrade your Rear Defrost Switch to a Carling using our custom harness combines the reliability of the Carling Switch with an easy way to swap out your old Defrost switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a switch that has already failed. We utilize specialty 3.0mm male pin connectors on the end of the harness that specifically mate up directly into the female openings in the Rover plug. This harness is a neat and tidy way to changeover to a Carling Switch, and comes with a color-coded set of instructions/legend for each wire; in addition the end of each wire is clearly labeled, and also includes a visual diagram to also show you where to plug each connector. Learn More

Add to Wishlist

Anti-Rattle Window Channel Kit (for Soft-Top / Removable Door Tops) [Garrison]

$130.00

This proprietary rubberized window channel replaces the inferior factory felt lining in Land Rover Defender removable door tops and eliminates the famous glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More

Add to Wishlist

Anti-Rattle Window Channel Kit (for Station Wagon / Rear Sliding Windows) [Garrison]

$130.00

This unique rubberised extrusion replaces the factory felt lining in Land Rover Defender rear sliding windows and eliminates the irritating glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More

Add to Wishlist

NEW Defender 2nd Row Doors Window Vents (set of 2) [L663 from Model Year 2020+]

$135.00

MODEL YEAR 2020+ NEW DEFENDER 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More

Add to Wishlist

Defender Rear Station Wagon Door Gas Strut 2.0 (from MY2002)

$150.00

Conversion kit for all Land Rover Defender 90 / 110 models from Model Year 2002 with rear station wagon door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. Learn More

Add to Wishlist

Tailgate Organizer / Rear Door for New Defender (L663 from Model Year 2020+)

Regular Price: $250.00

Special Price $225.00

Tailgate Organizer - Rear door storage system for the NEW Defender from 2020 onwards. The Tailgate Organizer makes use of the mostly unused space on the tailgate, allowing storage of gear such as First-aid kits, multimeters, work gloves, winch controls, tire repair kits. Learn More

Add to Wishlist

Extended (wide) wheel arches / fender flares for Land Rover Defender (Set of 4) [4-8 WEEK LEAD-TIME]

$750.00

Extended / wider fender flare arches you gain an additional ~1.25" of cover, suitable for fitting larger tires/etc to a Land Rover Defender through Model Year 2016. Learn More

Add to Wishlist

Rear Window Vents - Mercedes G-Class / G-Wagen (set of 2, 2018+)

$165.00

FOR 2018+ MODEL YEAR. Mercedes-Benz G-Class / G-Wagen / Station Wagon 2nd Row Door Window Vents/Screens (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter powdercoated black for a long-lasting durable finish. Learn More

Add to Wishlist

Rear Window Vents - Mercedes G-Class / G-Wagen (set of 2)

Regular Price: $160.00

Special Price $150.00

Mercedes-Benz G-Class / G-Wagen / Station Wagon 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs, fits G-Wagen up to model year 2017. Learn More

Add to Wishlist

Rear Window Vents - Toyota Land Cruiser J80 / 100 series (set of 2)

Regular Price: $135.00

Special Price $130.00

1990-1997 Toyota Land Cruiser J80 (& 100 series 1998-2007) Station Wagon 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs. Learn More

Add to Wishlist

Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

$95.00

SOLID TOP RIGHT-SIDE ONLY milled aluminum wingtop vent (for Right-Hand Drive vehicles only) Learn More

Add to Wishlist

200Tdi / 2.5TD Side Air Intake Vent Grille

$100.00

Land Rover Defender 200Tdi / 2.5TD Side Air Intake Vent Grille (milled aluminum) Learn More

Add to Wishlist

Carling Contura II OFF-ON-ON Switch

$25.00

Carling Contura II OFF-ON-ON Switch. Three position switch allowing you to wire two auxiliary circuits through one switch. Typical application would be for controlling two pairs of spotlamps or two electric fans via the one switch. Click switch once to activate circuit one; click again to activate circuits one and two. Learn More

Add to Wishlist

Dorman Clutch Master Cylinder Conversion Kit

Regular Price: $199.00

Special Price $190.00

We have modified a cast-iron Dorman master cylinder that is much more robust than the factory master cylinder, and significantly less prone to the inner wall wearing. This replaces the original Land Rover Clutch Master Cylinder, and our direct drop-in replacement kit includes the modified Dorman Clutch Master Cylinder, new pushrod with stainless hardware, and a braided stainless steel line to replace the factory "hard line" running from the master cylinder to the junction/union located on the bulkhead wall. Fit's late-IIA & III Series (1971-1984) and pre-Puma Defender (1983-2006). Learn More

Add to Wishlist

Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

Regular Price: $250.00

Special Price $225.00

This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More

Add to Wishlist

Defender 90 SW Stainless Hardware Kit (Exterior)

Regular Price: $225.00

Special Price $200.00

This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More

Add to Wishlist

Defender 2nd Row Doors Window Vents (set of 2)

Regular Price: $135.00

Special Price $125.00

Defender 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More

Add to Wishlist

Carling Switch Legend Decals (black/clear, white/clear, or clear/black)

$17.50

Carling Switch Legends. Contains 84 individual switch legends for fixing to the switch rocker windows on the popular Carling Technologies Contura II range of switches. Switch Legends are supplied on a peel-off sheet. Available in black-on-clear, white-on-clear, or clear-on-black backgrounds. Learn More

Add to Wishlist

Defender Stainless Steel Spare Tire Carrier for Station Wagon

Regular Price: $1,800.00

Special Price $1,700.00

Stainless Steel Spare Tire Carrier for Land Rover Defender Station Wagon (SW) vehicles. Mounts on the rear crossmember and bolts through the door, and relieves the stress of the weight of the spare tire which is known over time to crack the door frame structure. The carrier is mounted on the rear cross member, and a plate is fitted to the existing holes on the rear door, and connects to the unit by means of two stainless steel rod ends with the carrier. Available in two colors, natural stainless steel or black powdercoat. Learn More

Add to Wishlist

Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

$400.00

This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
Learn More

Add to Wishlist

LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

Regular Price: $135.00

Special Price $130.00

LR3 / LR4 / Discovery 1 & 2: 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More

Add to Wishlist

Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

Regular Price: $135.00

Special Price $130.00

Jeep JK Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminum and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JK Unlimited 2007-2018, sold in pairs. Learn More

Add to Wishlist

Stainless Steel Replacement Td5/Tdci Fuel Tank for Land Rover Defender 110/130

$2,950.00

Stainless steel replacement tanks for the Land Rover Defender 110/130 Td5/Tdci. Available in 100L, 120L, and 150L sizes. PLEASE NOTE: this is a special-order item only, lead-time is generally a minimum of 4-8 weeks. Learn More

Add to Wishlist

Hazard Switch Wiring Harness (includes Carling Hazard Switch & Multiplug)

$90.00

Failure and internal delamination of the of the Land Rover Hazard Switch #AFU4209L (for NAS/North American Spec vehicles), and #YUF101490 (for imported ROW/Rest Of World vehicles) is a common issue. Our harness combines the reliability of the Carling Hazard Switch with an easy way to swap out your old hazard switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a hazard switch that has already failed. This harness uses correctly sized 3mm pin connectors to connect to the factory wiring plug so you do not have to cut or splice the factory wires. INCLUDES your choice of either a black or red Carling Hazard Switch & Multiplug Connector. Learn More

Add to Wishlist

Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top [6-8 WEEK LEAD-TIME]

$1,850.00

To remove the spare tire from the interior of the Land Rover Defender Pickup (DCPU) or Soft-Top vehicle, and to keep the classic Defender look, we have adapted our proven spare wheel carrier to fit the pickup configuration. This swing-away tire carrier is opened independently of the tailgate, is rattle-free and completely made of stainless steel. NOTE: this will *not* fit the Defender HiCapacity (Hicap, HCPU) Pickup configuration. Available in two finish options, natural stainless steel or black powdercoat. Learn More

Add to Wishlist

CargoBear Awning Holder Bracket Set (4 PIECE SET)

$150.00

The CargoBear awning holder allows the installation of numerous awnings or awnings on the CargoBear Roof Rack. At least two (2) CargoBear *Crossbars* are required for assembly. The 4-piece set is delivered including the required mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included. Learn More

Add to Wishlist

Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

$300.00

Stamped 16-gauge aluminum sheet made from aluminum, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 without air conditioning, and late Series IIA/III trucks (with the headlights in the wings). Learn More

Add to Wishlist

Ford Ranger Pickup 2012+ model year 2nd Row Door Window Vents Screens (set of 2)

$135.00

Ford Ranger Pickup (2012+ model year) 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs. Learn More

Add to Wishlist

Search results for 'WING'