Custom Land Rover Series & Defender Parts

Search results for 'WING TOP'

63 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Land Rover Defender 90/110/130 Phone Dash Mount, aluminum (fits model years 1983-2006)

    Land Rover Defender 90/110/130 Phone Dash Mount, aluminum (fits model years 1983-2006)

    Regular Price: $175.00

    Special Price $150.00

    This custom phone mount was designed to be used with the Land Rover Defender dash (model year 1983-2006), and fits to the vehicle without any modifications (simply remove the factory screw in the middle of the center dash, and replace with our included kit & hardware). Learn More
  2. Rear Window Vents - Jeep Cherokee XJ (1984-2001), Nissan Navara D40	(set of 2)

    Rear Window Vents - Jeep Cherokee XJ (1984-2001), Nissan Navara D40 (set of 2)

    $135.00

    The window vents fit both the Jeep Cherokee XJ (1984-2001), and the Nissan Navara D40, and are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all Jeep Cherokee XJ (1984-2001) and Nissan Navara D40, sold in pairs. Learn More
  3. Handle for CargoBear system roof rack

    Handle for CargoBear system roof rack

    $90.00

    This is a Handle for the CargoBear system roof rack, which gives a convenient grab location for accessing your roof rack, roof top tent, or similar. The handle is made of alumuminum and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per (1), and includes the mounting hardware. Learn More
  4. LR3/LR4 Stainless Steel Spare Tire Carrier [***4-6 WEEK LEAD-TIME***]

    LR3/LR4 Stainless Steel Spare Tire Carrier [***4-6 WEEK LEAD-TIME***]

    Regular Price: $2,250.00

    Special Price $2,050.00

    This custom Spare Tire Carrier removes the spare tire from the underneath of the Land Rover LR3/LR4, allows for the fitment of larger than stock size spare tire, and to makes it more readily accessible as well as protects it from dirt/stones/etc. This swing-away tire carrier is rattle-free and completely made of stainless steel, and allows installation of the wheel on the rear of the vehicle. The tire carrier is bolted directly to the rear crossbeam of the vehicle for a secure fit, and please note that holes must be drilled in the original bumper for fitment of this tire carrier. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  5. Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

    Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

    Regular Price: $135.00

    Special Price $125.00

    Jeep JL Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JL Unlimited 2018- present, sold in pairs. Learn More
  6. High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    $225.00

    High Torque Gear Reduction Starter for the Land Rover trucks. This modern starter will amaze you every time you turn the key...no longer will you have to cross your fingers, and hope that your truck will start (either in the driveway, or out on the trail). Learn More
  7. Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)

    Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)

    Regular Price: $200.00

    Special Price $175.00

    Conversion kit for all Land Rover Defender 90/110 all model years with rear station wagon door. This conversion kit is for mounting on the TOP on the rear door, and includes stainless steel mounting hardware. This replaces the bottom checkstrap with a TOP mount Gas Strut, with a soft-stop function that keeps the door reliably open. Damper functions properly even with our spare tire carrier mounted to the rear crossmember. Learn More
  8. CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

    CargoBear 'Connector Bar' for LED light-bar (BRACKETS SOLD SEPARATELY)

    $40.00

    Connector Bar for LED light-bar or similar. Can be used on the front of the rack, either offset to the side(s) OR in the center on the front of the rack (see technical drawings). Suitable for universal accessories such as light bars or similar. Supplied *without* side brackets necessary for mounting (2 required) and without auxiliary lights. Please order the mounting brackets separately here: CargoBear Brackets for Connector Bar (2 brackets required per Connector Bar). Learn More
  9. Rear Window Vents - Mercedes G-Class / G-Wagen (set of 2)

    Rear Window Vents - Mercedes G-Class / G-Wagen (set of 2)

    Regular Price: $160.00

    Special Price $150.00

    Mercedes-Benz G-Class / G-Wagen / Station Wagon 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs, fits G-Wagen up to model year 2017. Learn More
  10. Rear Window Vents - Toyota Land Cruiser J80 / 100 series (set of 2)

    Rear Window Vents - Toyota Land Cruiser J80 / 100 series (set of 2)

    $125.00

    1990-1997 Toyota Land Cruiser J80 (& 100 series 1998-2007) Station Wagon 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs. Learn More
  11. Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

    Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

    $300.00

    Stamped 16-gauge aluminum sheet made from aluminum, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 without air conditioning, and late Series IIA/III trucks (with the headlights in the wings). Learn More
  12. High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    $4.00

    This replacement bolt corresponds to the original Land Rover part number ALR5549, and these are stainless steel replacements used to attach a NAS roll cage to a Defender. Please note that this replacement hardware is a HIGH TENSILE STAINLESS STEEL in Grade A2-80 providing a minimum tensile strength of approximately 115,000 psi. Available in bare stainless or black oxide finish. Price per piece, optional add-on replacement nyloc nut & isolating washers also available. Learn More
  13. Folding Table

    Folding Table

    $400.00

    The folding table can be temporarily or permanently mounted on vertical surfaces, for example inside the tailgate of a off-road vehicle, but also on the outside of a trailer, rear quarter panel of a vehicle, etc. The table is constructed of laser cut aluminum, and powdercoated black. Learn More
  14. Carling Contura II MOMENTARY-OFF-MOMENTARY Switch

    Carling Contura II MOMENTARY-OFF-MOMENTARY Switch

    $30.00

    Carling Contura II MOMENTARY-OFF-MOMENTARY Switch. Momentary spring loaded 2-way rocker switch. Use the DP switch wiring when using the momentary switch as an electric window control. Use the SP switch wiring when using the momentary switch as a winch control. Learn More
  15. Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2)

    Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2)

    $125.00

    Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  16. Rear Door Window Vents - universal, adjustable (set of 2)

    Rear Door Window Vents - universal, adjustable (set of 2)

    $160.00

    The window vents are not vehicle specific, they can be adjusted with high quality screw caps between 17.7" to 24.6" in width and thus cover a variety of vehicle types. They are ideal for allowing air circulation without compromising security or allowing water to enter. The window vents are made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle. Sold in pairs. Learn More
  17. Rear Wash/Wipe Switch Wiring Harness (*includes* Carling Switch & Multiplug)

    Rear Wash/Wipe Switch Wiring Harness (*includes* Carling Switch & Multiplug)

    $80.00

    Upgrading the factory wash/wipe Carling switch, from the clunky factory knob & switch (original part #PRC4454 & PRC4449) is a popular upgrade. Our harness combines the reliability of the Carling Wash/Wipe Switch with an easy way to swap out your old switch with our plug-and-play replacement. For imported / Rest of World (ROW) trucks OR North American Spec (NAS) vehicles. Learn More
  18. Extended (wide) wheel arches / fender flares for Land Rover Defender (Set of 4) [***4-8 WEEK LEAD-TIME***]

    Extended (wide) wheel arches / fender flares for Land Rover Defender (Set of 4) [***4-8 WEEK LEAD-TIME***]

    $750.00

    Extended / wider fender flare arches you gain an additional ~1.25" of cover, suitable for fitting larger tires/etc to a Land Rover Defender through Model Year 2016. Learn More
  19. Defender Console - Upper Dash Mount (Radio Housing)

    Defender Console - Upper Dash Mount (Radio Housing)

    $75.00

    Recreated from the original Defender radio console/tray for those Land Rover owners looking to retain a classic factory-fitted appearance to their radio installation, install auxiliary gauges, switches, CB, or similar. Learn More
  20. Tailgate Organizer / Rear Door for New Defender (L663 from Model Year 2020)

    Tailgate Organizer / Rear Door for New Defender (L663 from Model Year 2020)

    Regular Price: $250.00

    Special Price $225.00

    Tailgate Organizer - Rear door storage system for the NEW Defender from 2020 onwards. The Tailgate Organizer makes use of the mostly unused space on the tailgate, allowing storage of gear such as First-aid kits, multimeters, work gloves, winch controls, tire repair kits. Learn More
  21. Defender Rear Station Wagon Door Gas Strut 2.0 (from MY2002) [***3-4 WEEK LEAD-TIME***]

    Defender Rear Station Wagon Door Gas Strut 2.0 (from MY2002) [***3-4 WEEK LEAD-TIME***]

    Regular Price: $150.00

    Special Price $135.00

    Conversion kit for all Land Rover Defender 90 / 110 models from Model Year 2002 with rear station wagon door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. Learn More
  22. Wingtop Fender Storage Box Land Rover Defender 90 110 130 (RHD right-hand drive)

    Wingtop Fender Storage Box Land Rover Defender 90 110 130 (RHD right-hand drive)

    Regular Price: $350.00

    Special Price $275.00

    This Wingtop Fender Storage Box will fit any year Land Rover Defender 90 110 130 (1983-2015), for RHD (right-hand drive) vehicles only. A great way to convert the wingtop vent area to a space for watertight, secure, and functional storage. Learn More
  23. Defender Tunnel Tray for Land Rover Defender 90/110/130 (Right-Hand Drive / RHD, R380)

    Defender Tunnel Tray for Land Rover Defender 90/110/130 (Right-Hand Drive / RHD, R380)

    $90.00

    The Defender Tunnel Tray has been designed to fit on top of the transmission tunnel of all Land Rover Defenders (90, 110, 130) fitted with the R380 gearbox (Tdi, Td5 , and most V8 models). Unfortunately the Tunnel Tray will *NOT* fit the LT77 transmission tunnel or the early factory V8 engine vehicles fitted with the LT85 gearbox. Learn More
  24. NEW Defender (model year 2020+) 2nd Row Doors Window Vents (set of 2)

    NEW Defender (model year 2020+) 2nd Row Doors Window Vents (set of 2)

    Regular Price: $135.00

    Special Price $125.00

    MODEL YEAR 2020+ NEW DEFENDER 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  25. Elastic Winch Cover

    Elastic Winch Cover

    $50.00

    Protect your winch & winchline from weather, mud, debris, UV light, and more with our softshell elastic winch cover. Rainwater, ice, salt, mud and pebbles can not only visually damage expensive winch systems and their lines in the long run, but also reduce the performance of the components. Synthetic lines in particular are also very sensitive to the omnipresent UV radiation. Learn More
  26. NAS Soft-Top Rear Speaker Panels

    NAS Soft-Top Rear Speaker Panels

    $225.00

    These are replacement speaker housings for the North American Specification (NAS) Defender 90 Soft-Top models, to replace original part #AWR1550LNF and AWR1551LNF. The apertures within the housing will accept a 5.25" speaker and include the slots for the rear seatbelt trim/insert, and the speaker housings can also be trimmed slightly to also accept a 6.5" speaker (as pictured). Also available in a speaker "blank" with no cutout as well. Learn More
  27. Anti-Rattle Window Channel Kit (for Station Wagon / Rear Sliding Windows) [Garrison]

    Anti-Rattle Window Channel Kit (for Station Wagon / Rear Sliding Windows) [Garrison]

    $130.00

    This unique rubberised extrusion replaces the factory felt lining in Land Rover Defender rear sliding windows and eliminates the irritating glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  28. Anti-Rattle Window Channel Kit (for Soft-Top / Removable Door Tops) [Garrison]

    Anti-Rattle Window Channel Kit (for Soft-Top / Removable Door Tops) [Garrison]

    $130.00

    This proprietary rubberized window channel replaces the inferior factory felt lining in Land Rover Defender removable door tops and eliminates the famous glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  29. Conversion kit for mobile parking heater

    Conversion kit for mobile parking heater

    Conversion kit for mobile auxiliary heating in the aluminum box A mobile parking heater is something great. In everyday use, however, it is repeatedly exposed to splash water, rain, snow, etc. Learn More
  30. Rear Defrost Switch Wiring Harness (*includes* Carling Switch & Multiplug)

    Rear Defrost Switch Wiring Harness (*includes* Carling Switch & Multiplug)

    $45.00

    Upgrade your Rear Defrost Switch to a Carling using our custom harness combines the reliability of the Carling Switch with an easy way to swap out your old Defrost switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a switch that has already failed. We utilize specialty 3.0mm male pin connectors on the end of the harness that specifically mate up directly into the female openings in the Rover plug. This harness is a neat and tidy way to changeover to a Carling Switch, and comes with a color-coded set of instructions/legend for each wire; in addition the end of each wire is clearly labeled, and also includes a visual diagram to also show you where to plug each connector. Learn More
  31. Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    $125.00

    Conversion kit for all Land Rover Defender 90/110 to model year 2001 with rear station wagon door. Replaces the anchor with a special gas pressure shock with soft-stop function, which keeps the door reliably open. Learn More
  32. Carling Contura II OFF-MOMENTARY Switch

    Carling Contura II OFF-MOMENTARY Switch

    $25.00

    Carling Contura II OFF-MOMENTARY Switch. Momentary switch which can be used as either a fog switch on the later Defender, or simply as a horn function. Learn More
  33. CargoBear Awning Holder Bracket Set (4 PIECE SET)

    CargoBear Awning Holder Bracket Set (4 PIECE SET)

    $100.00

    The CargoBear awning holder allows the installation of numerous awnings or awnings on the CargoBear Roof Rack. At least two (2) CargoBear *Crossbars* are required for assembly. The 4-piece set is delivered including the required mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included. Learn More
  34. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Regular Price: $250.00

    Special Price $225.00

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  35. Defender Front Grille (w/ cutout for manual bonnet latch)

    Defender Front Grille (w/ cutout for manual bonnet latch)

    $500.00

    Similar to our "standard" SDO Front Grille....BUT this particular unit is designed for those those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle and allows you to manually open the bonnet), versus those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle). This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. Learn More
  36. Dorman Clutch Master Cylinder Conversion Kit

    Dorman Clutch Master Cylinder Conversion Kit

    $185.00

    We have modified a cast-iron Dorman master cylinder that is much more robust than the factory master cylinder, and significantly less prone to the inner wall wearing. This replaces the original Land Rover Clutch Master Cylinder, and our direct drop-in replacement kit includes the modified Dorman Clutch Master Cylinder, new pushrod with stainless hardware, and a braided stainless steel line to replace the factory "hard line" running from the master cylinder to the junction/union located on the bulkhead wall. Fit's late-IIA & III Series (1971-1984) and pre-Puma Defender (1983-2006). Learn More
  37. Carling Contura II OFF-ON Switch

    Carling Contura II OFF-ON Switch

    $19.50

    Carling Contura II OFF-ON Switch. One-way switch to simply switch on and off (i.e. spot lights or similar). Learn More
  38. Carling Contura II Hazard Switch

    Carling Contura II Hazard Switch

    $32.50

    Carling Contura II Hazard Switch for Land Rover Defender. Learn More
  39. Interior Door Pull/Grab Handles (set of 2)

    Interior Door Pull/Grab Handles (set of 2)

    $140.00

    CNC milled aluminum replacement interior door handles (SET of 2) Learn More
  40. Defender Front Grille

    Defender Front Grille

    $500.00

    This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. PLEASE NOTE: we currently have two versions of the Front Grille - one designed for those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle), and those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle). This unit is designed for those with the in-cabin bonnet pull cable, if you require the other version of the Front Grille please see our other listing. Learn More
  41. Wingtop Vent (standard LEFT-SIDE ONLY)

    Wingtop Vent (standard LEFT-SIDE ONLY)

    $95.00

    CNC milled aluminum replacement wingtop vent (LEFT-SIDE ONLY) Learn More
  42. Wingtop Vent (standard RIGHT-SIDE ONLY)

    Wingtop Vent (standard RIGHT-SIDE ONLY)

    $95.00

    CNC milled aluminum replacement wingtop vent (RIGHT-SIDE ONLY) Learn More
  43. 200Tdi / 2.5TD Side Air Intake Vent Grille

    200Tdi / 2.5TD Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 200Tdi / 2.5TD Side Air Intake Vent Grille (milled aluminum) Learn More
  44. Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

    Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

    $95.00

    SOLID TOP RIGHT-SIDE ONLY milled aluminum wingtop vent (for Right-Hand Drive vehicles only) Learn More
  45. Soft Top Clips (rear window tailgate crossbar retaining clips)

    Soft Top Clips (rear window tailgate crossbar retaining clips)

    $95.00

    Land Rover Defender rear window / rear tailgate crossbar soft-top retaining clips. Made from solid billet aluminum and powdercoated black. Learn More
  46. Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

    Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

    $95.00

    SOLID TOP LEFT-SIDE ONLY milled aluminum wingtop vent (for Left-Hand Drive vehicles only) Learn More
  47. Defender 90 SW Stainless Hardware Kit (Exterior)

    Defender 90 SW Stainless Hardware Kit (Exterior)

    Regular Price: $225.00

    Special Price $200.00

    This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  48. Defender 2nd Row Doors Window Vents (set of 2)

    Defender 2nd Row Doors Window Vents (set of 2)

    $125.00

    Defender 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  49. Carling Contura II ON-OFF-ON Switch

    Carling Contura II ON-OFF-ON Switch

    $30.00

    Carling Contura II ON-OFF-ON Switch. This alternative three position switch allows you to wire two auxiliary circuits through the one switch. This switch operates where circuits one or two are activated completely independently from one another. This switch will replace the standard switch supplied with the popular Exmoor Trim/Waeco heated seat kits. Learn More
  50. CargoBear Quick-Mounting Tent Frame

    CargoBear Quick-Mounting Tent Frame

    $450.00

    The roof-top quick-change system consists of two stainless steel frames (an upper and lower part). The lower part is powder-coated black and is attached to the vehicle, the top of the frame is mounted on the tent. This system is suitable for all roof racks, and the assembly and disassembly takes place quickly - only four screws have to be removed. Additionally, because of the even geometric nature of the tent frame, the tent can also be easily rotated at a 90 ° angle for changing the opening/access from front of the rack to side (or vice-versa). Learn More
  51. Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top [***6-8 WEEK LEAD-TIME***]

    Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top [***6-8 WEEK LEAD-TIME***]

    $1,850.00

    To remove the spare tire from the interior of the Land Rover Defender Pickup (DCPU) or Soft-Top vehicle, and to keep the classic Defender look, we have adapted our proven spare wheel carrier to fit the pickup configuration. This swing-away tire carrier is opened independently of the tailgate, is rattle-free and completely made of stainless steel. NOTE: this will *not* fit the Defender HiCapacity (Hicap, HCPU) Pickup configuration. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  52. Hazard Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    Hazard Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    $85.00

    Failure and internal delamination of the of the Land Rover Hazard Switch #AFU4209L (for NAS/North American Spec vehicles), and #YUF101490 (for imported ROW/Rest Of World vehicles) is a common issue. Our harness combines the reliability of the Carling Hazard Switch with an easy way to swap out your old hazard switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a hazard switch that has already failed. This harness uses correctly sized 3mm pin connectors to connect to the factory wiring plug so you do not have to cut or splice the factory wires. INCLUDES your choice of either a black or red Carling Hazard Switch & Multiplug Connector. Learn More
  53. Stainless Steel Replacement Td5/Tdci Fuel Tank for Land Rover Defender 110/130

    Stainless Steel Replacement Td5/Tdci Fuel Tank for Land Rover Defender 110/130

    $2,750.00

    Stainless steel replacement tanks for the Land Rover Defender 110/130 Td5/Tdci. Available in 100L, 120L, and 150L sizes. PLEASE NOTE: this is a special-order item only, lead-time is generally a minimum of 4-8 weeks. Learn More
  54. Mounting Plate for heater

    Mounting Plate for heater

    $75.00

    Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More
  55. Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

    Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

    $125.00

    Jeep JK Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminum and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JK Unlimited 2007-2018, sold in pairs. Learn More
  56. LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

    LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

    $125.00

    LR3 / LR4 / Discovery 1 & 2: 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  57. Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $50.00

    Leather door pulls for the interior, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  58. Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    $170.00

    Aluminum Rear Ladder for Land Rover Defender 90 & 110 Station Wagon (SW) vehicles will also fit Series hardtop vehicles as well. Allows easy access to the roof rack, and is made from high quality aluminum and TIG welded for strength. The ladder is mounted to the rain gutter at the top utilizing the provided hardware, and does require (2) mounting holes to be drilled into the hard top. Unit weighs just under 4lbs, and is available in two colors either anodized silver or black powdercoat. Also available with *optional* rear step that bolts directly to the rear crossmember. Learn More
  59. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $350.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  60. Defender Stainless Steel Spare Tire Carrier for Station Wagon

    Defender Stainless Steel Spare Tire Carrier for Station Wagon

    $1,600.00

    Stainless Steel Spare Tire Carrier for Land Rover Defender Station Wagon (SW) vehicles. Mounts on the rear crossmember and bolts through the door, and relieves the stress of the weight of the spare tire which is known over time to crack the door frame structure. The carrier is mounted on the rear cross member, and a plate is fitted to the existing holes on the rear door, and connects to the unit by means of two stainless steel rod ends with the carrier. Available in two colors, natural stainless steel or black powdercoat. Learn More
  61. Carling Switch Legend Decals (black/clear, white/clear, or clear/black)

    Carling Switch Legend Decals (black/clear, white/clear, or clear/black)

    $17.50

    Carling Switch Legends. Contains 84 individual switch legends for fixing to the switch rocker windows on the popular Carling Technologies Contura II range of switches. Switch Legends are supplied on a peel-off sheet. Available in black-on-clear, white-on-clear, or clear-on-black backgrounds. Learn More
  62. Carling Contura II REAR WASH-WIPE Switch

    Carling Contura II REAR WASH-WIPE Switch

    $32.50

    Carling Contura II REAR WASH-WIPE Switch. Learn More
  63. Wingtop Vents (standard SET)

    Wingtop Vents (standard SET)

    $190.00

    CNC milled aluminum replacement wingtop vents (SET) Learn More

63 Item(s)

per page

List  Grid 

Set Ascending Direction