Custom Land Rover Series & Defender Parts

Search results for 'air intake'

45 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Defender Console - Upper Dash Mount (Radio Housing)

    Defender Console - Upper Dash Mount (Radio Housing)

    $75.00

    Recreated from the original Defender radio console/tray for those Land Rover owners looking to retain a classic factory-fitted appearance to their radio installation, install auxiliary gauges, switches, CB, or similar. Learn More
  2. Heritage Style Headlight Surrounds, aluminum with inlet squares (pair, black or silver powdercoat)

    Heritage Style Headlight Surrounds, aluminum with inlet squares (pair, black or silver powdercoat)

    $375.00

    These are replacement headlight surrounds for any 1983-2015 Land Rover Defender 90/110/130, in the Heritage style originally from Land Rover. Made from stamped 16-gauge aluminum sheet, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware. This version has the inlet "squares" between the marker lights (versus our other version with the inlet "gills"). Learn More
  3. Heritage Style Headlight Surrounds, aluminum with inlet gills (pair, black or silver powdercoat)

    Heritage Style Headlight Surrounds, aluminum with inlet gills (pair, black or silver powdercoat)

    $375.00

    These are replacement headlight surrounds for any 1983-2015 Land Rover Defender 90/110/130, in the Heritage style originally from Land Rover. Made from stamped 16-gauge aluminum sheet, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware. This version has the inlet "gills" between the marker lights (versus our other version with the inlet "squares"). Learn More
  4. Tailgate Organizer for Land Rover Defender

    Tailgate Organizer for Land Rover Defender

    $275.00

    Where to put all the little odds and ends in an expedition vehicle? First-aid kid, multimeter, work gloves, winch controls, tire repair kit, etc....all these things have to be put somewhere. Our tailgate organizer makes use of the mostly unused space on the rear door. In several pockets attached with MOLLE attachment system you can store away all these bits and pieces which then are at hand once needed. Learn More
  5. Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)

    Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)

    $275.00

    Upgraded silicone replacement for the Intake Plenum Hose (original part #ESR1316) for the 1993/1994/1995/1997 NAS (North American Spec) Land Rover Defender 90/110 with the 3.9L or 4.0 EFI V8 motor. These replacement hoses are constructed from a 4-layer heavy duty silicone that is ~5mm (3/16") thick, and can withstand temperature ranges from -50F to +350F. Unit comes with (2) hose clamps for easy installation. Learn More
  6. Rear Window Vents - Mercedes G-Class / G-Wagen (set of 2)

    Rear Window Vents - Mercedes G-Class / G-Wagen (set of 2)

    Regular Price: $160.00

    Special Price $150.00

    Mercedes-Benz G-Class / G-Wagen / Station Wagon 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs, fits G-Wagen up to model year 2017. Learn More
  7. Rear Window Vents - Toyota Land Cruiser J80 / 100 series (set of 2)

    Rear Window Vents - Toyota Land Cruiser J80 / 100 series (set of 2)

    $125.00

    1990-1997 Toyota Land Cruiser J80 (& 100 series 1998-2007) Station Wagon 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs. Learn More
  8. LED Interior Light for Land Rover Defender (Warm White)

    LED Interior Light for Land Rover Defender (Warm White)

    $135.00

    LEDs are not only popular in headlights and signal lamps, but also advantageous in the interior of the vehicle. The LED interior light is a simple "plug and play exchange" for the existing interior lights (front or rear) of the Land Rover Defender SW. Simply remove the original cover and the lamp of the previous factory unit (AMR3155) are removed, install the LED unit, and all previous functions of the interior light (on / off / door opening) are retained. In addition, the lighting can be switched over to a "red light" to preserve night vision (activated via the red push button). If the interior light is switched off, it will accept the last selected light color the next time the lamp is switched on. Learn More
  9. Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

    Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat)

    $300.00

    Stamped 16-gauge aluminum sheet made from aluminum, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 without air conditioning, and late Series IIA/III trucks (with the headlights in the wings). Learn More
  10. Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    $85.00

    Dash Center Face Plate Panel (VDO-3x Carling Switches-VDO) for Land Rover Defender. Learn More
  11. Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

    Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

    Regular Price: $135.00

    Special Price $125.00

    Jeep JL Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JL Unlimited 2018- present, sold in pairs. Learn More
  12. Yamaha TW200 Quick Release Seat Bolts (Set of 2)

    Yamaha TW200 Quick Release Seat Bolts (Set of 2)

    $40.00

    Custom extended seat bolts compatible with the 1987-2021 Yamaha TW200. The factory recessed bolts are difficult to access, and also make any "field repairs" to the battery or getting under the seat very difficult. Our custom seat bolt solution features a knurled end for ease of threading the bolts in-or-out by hand, and also have a 6-point wrench knockout that fits a standard 10mm wrench to tighten/loosen. We've also made the knockout area large enough to accept an adjustable wrench, or pliers in a pinch for tightening or loosening the seat bolts. Turned on a CNC lathe from a solid piece of 304 annealed stainless steel, they are guaranteed not to rust or corrode. Price is for a SET OF 2. MADE IN THE USA! Learn More
  13. Tailgate Organizer / Rear Door for New Defender (L663 from Model Year 2020)

    Tailgate Organizer / Rear Door for New Defender (L663 from Model Year 2020)

    Regular Price: $250.00

    Special Price $225.00

    Tailgate Organizer - Rear door storage system for the NEW Defender from 2020 onwards. The Tailgate Organizer makes use of the mostly unused space on the tailgate, allowing storage of gear such as First-aid kits, multimeters, work gloves, winch controls, tire repair kits. Learn More
  14. Wingtop Fender Storage Box Land Rover Defender 90 110 130 (RHD right-hand drive)

    Wingtop Fender Storage Box Land Rover Defender 90 110 130 (RHD right-hand drive)

    Regular Price: $350.00

    Special Price $275.00

    This Wingtop Fender Storage Box will fit any year Land Rover Defender 90 110 130 (1983-2015), for RHD (right-hand drive) vehicles only. A great way to convert the wingtop vent area to a space for watertight, secure, and functional storage. Learn More
  15. NEW Defender (model year 2020+) 2nd Row Doors Window Vents (set of 2)

    NEW Defender (model year 2020+) 2nd Row Doors Window Vents (set of 2)

    Regular Price: $135.00

    Special Price $125.00

    MODEL YEAR 2020+ NEW DEFENDER 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  16. Airline Rail Lashing Points w/ Single Stud quick-release tie-downs (Set of 6)

    Airline Rail Lashing Points w/ Single Stud quick-release tie-downs (Set of 6)

    $50.00

    This set of (6) lashing points and single studs can be used to securely mount attachment points on your vehicle for securing loads during travel or similar. Learn More
  17. Conversion kit for mobile parking heater

    Conversion kit for mobile parking heater

    Conversion kit for mobile auxiliary heating in the aluminum box A mobile parking heater is something great. In everyday use, however, it is repeatedly exposed to splash water, rain, snow, etc. Learn More
  18. Rear Door Window Vents - universal, adjustable (set of 2)

    Rear Door Window Vents - universal, adjustable (set of 2)

    $160.00

    The window vents are not vehicle specific, they can be adjusted with high quality screw caps between 17.7" to 24.6" in width and thus cover a variety of vehicle types. They are ideal for allowing air circulation without compromising security or allowing water to enter. The window vents are made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle. Sold in pairs. Learn More
  19. Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2)

    Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2)

    $125.00

    Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  20. Rear Window Vents - Jeep Cherokee XJ (1984-2001), Nissan Navara D40	(set of 2)

    Rear Window Vents - Jeep Cherokee XJ (1984-2001), Nissan Navara D40 (set of 2)

    $135.00

    The window vents fit both the Jeep Cherokee XJ (1984-2001), and the Nissan Navara D40, and are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all Jeep Cherokee XJ (1984-2001) and Nissan Navara D40, sold in pairs. Learn More
  21. Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat)

    Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat)

    $275.00

    Stamped 16-gauge aluminum sheet (~0.05" thick), and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 with air conditioning (NOTE: also fits the standard/stock Defender front end of vehicles *without* the A/C bumpout). Learn More
  22. Lashing rail fitting, double stud

    Lashing rail fitting, double stud

    $7.00

    Double Stud Fitting for Airline Cargo lashing rails, load capacity 2425lbs (1100kg), ring diameter 1.57" (40mm). Units are manufactured to ISO 9788 specs, made from galvanized steel and are UV and salt water resistant. For use with the CargoBear Roof Rack system. Learn More
  23. Webasto air diffuser, rotatable, with 60mm connection

    Webasto air diffuser, rotatable, with 60mm connection

    $30.00

    Rotating air outlet, with 60mm connection, suitable for a wide range of heating systems from Webasto, Eberspächer and Planar. Learn More
  24. Mounting Plate for heater

    Mounting Plate for heater

    $75.00

    Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More
  25. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Regular Price: $250.00

    Special Price $225.00

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  26. Defender Front Grille (w/ cutout for manual bonnet latch)

    Defender Front Grille (w/ cutout for manual bonnet latch)

    $500.00

    Similar to our "standard" SDO Front Grille....BUT this particular unit is designed for those those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle and allows you to manually open the bonnet), versus those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle). This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. Learn More
  27. Defender Front Grille

    Defender Front Grille

    $500.00

    This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. PLEASE NOTE: we currently have two versions of the Front Grille - one designed for those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle), and those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle). This unit is designed for those with the in-cabin bonnet pull cable, if you require the other version of the Front Grille please see our other listing. Learn More
  28. Dash Center Face Plate Panel (6 Carling)

    Dash Center Face Plate Panel (6 Carling)

    $85.00

    Dash Center Face Plate Panel (6 Carling Switches) for Land Rover Defender. Learn More
  29. 200Tdi / 2.5TD Side Air Intake Vent Grille

    200Tdi / 2.5TD Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 200Tdi / 2.5TD Side Air Intake Vent Grille (milled aluminum) Learn More
  30. Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

    Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

    $95.00

    SOLID TOP RIGHT-SIDE ONLY milled aluminum wingtop vent (for Right-Hand Drive vehicles only) Learn More
  31. Soft Top Clips (rear window tailgate crossbar retaining clips)

    Soft Top Clips (rear window tailgate crossbar retaining clips)

    $95.00

    Land Rover Defender rear window / rear tailgate crossbar soft-top retaining clips. Made from solid billet aluminum and powdercoated black. Learn More
  32. 300Tdi/Td5/Puma Side Air Intake Vent Grille

    300Tdi/Td5/Puma Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 300Tdi / Td5 / Puma Side Air Intake Vent Grille (milled aluminum) Learn More
  33. Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

    Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

    $95.00

    SOLID TOP LEFT-SIDE ONLY milled aluminum wingtop vent (for Left-Hand Drive vehicles only) Learn More
  34. Defender 90 SW Stainless Hardware Kit (Exterior)

    Defender 90 SW Stainless Hardware Kit (Exterior)

    Regular Price: $225.00

    Special Price $200.00

    This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  35. Defender 2nd Row Doors Window Vents (set of 2)

    Defender 2nd Row Doors Window Vents (set of 2)

    $125.00

    Defender 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  36. Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

    Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

    $125.00

    Jeep JK Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminum and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JK Unlimited 2007-2018, sold in pairs. Learn More
  37. LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

    LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

    $125.00

    LR3 / LR4 / Discovery 1 & 2: 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  38. Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $50.00

    Leather door pulls for the interior, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  39. Defender Military Snow Cowl Cover - Stainless Steel

    Defender Military Snow Cowl Cover - Stainless Steel

    $245.00

    Stainless Steel Military Snow Cowl Cover for the air intake, for Land Rover Defender 90/110/130 (all versions). Includes seal and mounting hardware. Available in natural/bare stainless steel or black powdercoated option. Learn More
  40. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Black Powdercoated

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Black Powdercoated

    $160.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) of the Mounting Screw Kits, and the Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  41. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Natural/Bare Stainless Steel (no additional charge)

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Natural/Bare Stainless Steel (no additional charge)

    $145.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) of the Mounting Screw Kits, and the Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  42. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender

    $145.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) Mounting Screw Kits, enough to do a full set of headlights for one vehicle. The Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  43. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $350.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  44. LT230 Transfer Case Increased Capacity Sump Cover

    LT230 Transfer Case Increased Capacity Sump Cover

    $275.00

    Increased capacity (21oz) sump cover designed for the Land Rover LT230 transfer case, CNC milled from a solid block of aircraft grade aluminum. Compatible with all model years of the Land Rover Defender and Discovery, and will fit either diesel or V-8 motors, and has a "blank" pocket milled into the side of the unit for folks that may want to drill and tap an oil temperature gauge sending unit. Learn More
  45. Wingtop Vents (standard SET)

    Wingtop Vents (standard SET)

    $190.00

    CNC milled aluminum replacement wingtop vents (SET) Learn More

45 Item(s)

per page

List  Grid 

Set Ascending Direction