Custom Land Rover Series & Defender Parts

Search results for 'custom badge'

32 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. "Land Rover Solihull" Oval Badge (Cast Aluminum)

    "Land Rover Solihull" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 2-13/16" high x 3/16" thick. Learn More
  2. "Land Rover Four Wheel Drive Station Wagon" Oval Badge (Cast Aluminum)

    "Land Rover Four Wheel Drive Station Wagon" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  3. CargoBear - Modular Roof Rack System for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    $1,500.00

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powder-coated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.35" (60mm) above the roof height, making them one of the thinnest roof racks on the market. Thanks to the lashing rails, you can flexibly secure a roof load anywhere on the rack. Each section is equipped with three plates of coated diamond plate, which can be used and left installed as the "floor" - but not required (in other words you can leave the plates out of the rack, so just the rails are in place with no floor). Whether you need a full-length carrier for your 110 Defender or just a short platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  4. Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Regular Price: $125.00

    Special Price $115.00

    Stainless steel mud flap mounts/brackets for Land Rover Defender 110/130 (all model years), for left and right rear tires (mirror inverted). Supplied as a set of 2, in bare stainless steel, dimensions approx. 17" x 4.75" x 2.5" (440x120x65mm). Learn More
  5. Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    $175.00

    These embossed aluminum signs are the *exact* specifications that were used in the Camel Trophy event on the vehicles racks, and are supplied from the company that manufactured the vehicle plates for the Camel Trophy event originally from 1980-1998. Learn More
  6. CargoBear - Modular Roof Rack System for Mercedes G-Wagen  [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Mercedes G-Wagen [***4-6 WEEK LEAD-TIME***]

    $2,200.00

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powder-coated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.75" (70mm) above the roof height, making them one of the thinnest roof racks on the market. Thanks to the lashing rails, you can flexibly secure a roof load anywhere on the rack. Each section is equipped with three plates of coated diamond plate, which can be used and left installed as the "floor" - but not required (in other words you can leave the plates out of the rack, so just the rails are in place with no floor). Whether you need a full-length carrier for your G-Wagen or just a short platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  7. CargoBear - Modular Roof Rack System for Land Rover LR3 / LR4 [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Land Rover LR3 / LR4 [***4-6 WEEK LEAD-TIME***]

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powdercoated. They are completely separable - and infinitely flexible to configure to your desired needs. With the integrated L-track airline lashing points in the roof rack rails, you can flexibly secure a roof load anywhere on the rack. Whether you need a full-length carrier for your LR3/LR4 or just a short "three-quarter rack" platform, the CargoBear is optimally tuned and adjustable to your requirements. hether you need a full-length carrier for your LR3/LR4 or just a short "three-quarter rack" platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  8. [FACTORY SECONDS WITH FINISH ISSUES] Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    [FACTORY SECONDS WITH FINISH ISSUES] Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    Regular Price: $175.00

    Special Price $75.00

    PLEASE NOTE: THESE ARE BEING OFFERED AS "FACTORY SECONDS" DUE TO SLIGHT MANUFACTURING ISSUES WITH THE FONT COLOR/PAINT. THE ISSUES ARE RELATIVELY MINOR, BUT DO AFFECT THE FINISH OF THE PRODUCT. Learn More
  9. Dash Panel & Interior Lights Wiring Harness (*includes* Carling Switch & Multiplug)

    Dash Panel & Interior Lights Wiring Harness (*includes* Carling Switch & Multiplug)

    $65.00

    Failure of the factory switch that controls the Dash Lamp/Panel Lights & Interior Lights (corresponding to original part #PRC7371, generally used on Defender vehicles through the 1994 model year) is a common issue. Our custom harness combines the reliability of the Carling Switch with an easy way to swap out your old Dash Lamp/Panel Lights & Interior Lights switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a switch that has already failed. We utilize specialty 3.0mm male pin connectors on the end of the harness that specifically mate up directly into the female openings in the Rover plug. Learn More
  10. High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    $225.00

    High Torque Gear Reduction Starter for the Land Rover trucks. This modern starter will amaze you every time you turn the key...no longer will you have to cross your fingers, and hope that your truck will start (either in the driveway, or out on the trail). Learn More
  11. LR3/LR4 Stainless Steel Spare Tire Carrier [***6-8 WEEK LEAD-TIME***]

    LR3/LR4 Stainless Steel Spare Tire Carrier [***6-8 WEEK LEAD-TIME***]

    Regular Price: $2,200.00

    Special Price $2,050.00

    This custom Spare Tire Carrier removes the spare tire from the underneath of the Land Rover LR3/LR4, allows for the fitment of larger than stock size spare tire, and to makes it more readily accessible as well as protects it from dirt/stones/etc. This swing-away tire carrier is rattle-free and completely made of stainless steel, and allows installation of the wheel on the rear of the vehicle. The tire carrier is bolted directly to the rear crossbeam of the vehicle for a secure fit, and please note that holes must be drilled in the original bumper for fitment of this tire carrier. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  12. "Land Rover Tithonus" Oval Badge (Cast Aluminum)

    "Land Rover Tithonus" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  13. TW200 Quick Release Seat Bolts (Set of 2)

    TW200 Quick Release Seat Bolts (Set of 2)

    $40.00

    Custom extended seat bolts compatible with the 1987-2019 Yamaha TW200. The factory recessed bolts are difficult to access, and also make any "field repairs" to the battery or getting under the seat very difficult. Our custom seat bolt solution features a knurled end for ease of threading the bolts in-or-out by hand, and also have a 6-point wrench knockout that fits a standard 10mm wrench to tighten/loosen. We've also made the knockout area large enough to accept an adjustable wrench, or pliers in a pinch for tightening or loosening the seat bolts. Turned on a CNC lathe from a solid piece of 304 annealed stainless steel, they are guaranteed not to rust or corrode. Price is for a SET OF 2. Learn More
  14. Land Rover Defender Flexible Radio Antenna - AM / FM / DAB / DAB +

    Land Rover Defender Flexible Radio Antenna - AM / FM / DAB / DAB +

    $135.00

    This radio antenna has excellent radio reception and scores with high-quality optics. Since conventional antenna feet are usually a little too large, this custom foot fits perfectly into the original opening in the fender of the Land Rover Defender. The Defender antenna is suitable for all Land Rover Defender 90/110/130 with existing antenna or antenna bore, and the robust antenna is particularly suitable for off-road use and offers extensive reception of AM, FM, DAB, DAB+. Learn More
  15. "Land Rover Station Wagon" Oval Badge (Cast Aluminum)

    "Land Rover Station Wagon" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  16. SDO GIFT CERTIFICATE

    SDO GIFT CERTIFICATE

    $0.00

    Series-Defender Outfitters gift certificates make great gifts! Learn More
  17. Defender Footwell Panels [***3-4 WEEK PRODUCTION LEAD-TIME***]

    Defender Footwell Panels [***3-4 WEEK PRODUCTION LEAD-TIME***]

    $100.00

    [THIS ITEM IS CUSTOM MADE TO ORDER BASED ON VEHICLE CONFIGURATION, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 3-4 WEEKS.]. Aluminum panels to replace the missing or worn out stock cardboard units. Panels are made from sturdy .063 aluminum plate that is waterjet cut. Panels are currently available for all NAS and LHD (Left-Hand Drive) models (90's, 110’s, and 130's). RHD (Right-Hand Drive) panels are NOT available yet, but are coming soon. Learn More
  18. Defender Front Grille

    Defender Front Grille

    $500.00

    This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. PLEASE NOTE: we currently have two versions of the Front Grille - one designed for those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle), and those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle). This unit is designed for those with the in-cabin bonnet pull cable, if you require the other version of the Front Grille please see our other listing. Learn More
  19. "Bloody Knuckles Brotherhood: Member" Round 3-inch Metal Grille Badge

    "Bloody Knuckles Brotherhood: Member" Round 3-inch Metal Grille Badge

    $50.00

    Metal Grille badge with hard enamel cloisonne finish in a 3" diameter size with two 3/16" cut outs for mounting. Learn More
  20. Winch Hawse Fairlead (10" w/ bottle opener)

    Winch Hawse Fairlead (10" w/ bottle opener)

    $125.00

    CNC milled aluminum winch hawse fairlead (10" mounting holes, 1.5" thick) with built-in bottle opener on the bottom. Type III hard anodized black & includes mounting hardware. Learn More
  21. Dorman Clutch Master Cylinder Conversion Kit

    Dorman Clutch Master Cylinder Conversion Kit

    $175.00

    We have modified a cast-iron Dorman master cylinder that is much more robust than the factory master cylinder, and significantly less prone to the inner wall wearing. This replaces the original Land Rover Clutch Master Cylinder, and our direct drop-in replacement kit includes the modified Dorman Clutch Master Cylinder, new pushrod with stainless hardware, and a braided stainless steel line to replace the factory "hard line" running from the master cylinder to the junction/union located on the bulkhead wall. Fit's late-IIA & III Series (1971-1984) and pre-Puma Defender (1983-2006). Learn More
  22. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Regular Price: $125.00

    Special Price $100.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Green & Gold oval emblem decal #DAG100330 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  23. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Regular Price: $125.00

    Special Price $100.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Black & Silver oval emblem decal #DAG500140 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  24. Garrison Underseat Storage Case SE

    Garrison Underseat Storage Case SE

    $80.00

    Introducing the innovative Land Rover Defender Underseat Storage Case from Garrison Outfitters®. These cases have been custom designed to fit securely under your Land Rover Defender seat bases to pack additional storage into your vehicle cabin. Secured with 3M® Dual Lock fasteners and Velcro® One-Wrap® straps, these cases install in seconds without the need for tools or modification to your vehicle. Learn More
  25. Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    $130.00

    This unique rubberised extrusion replaces the factory felt lining in Land Rover Defender rear sliding windows and eliminates the irritating glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  26. Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    $130.00

    This proprietary rubberized window channel replaces the inferior factory felt lining in Land Rover Defender removable door tops and eliminates the famous glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  27. Defender Front Grille (w/ cutout for manual bonnet latch)

    Defender Front Grille (w/ cutout for manual bonnet latch)

    $500.00

    Similar to our "standard" SDO Front Grille....BUT this particular unit is designed for those those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle and allows you to manually open the bonnet), versus those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle). This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. Learn More
  28. NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    $500.00

    [THIS ITEM IS CUSTOM MADE TO ORDER, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 3-6 WEEKS]. These crossbars run from the front side rollbars on a NAS (North American Spec) Defender and allow roof racks, baskets, and similar to be mounted safely to the top of your vehicle (note: rack and/or basket NOT included). These units are constructed from 1-1/2" steel tubing, and utilize custom fabrication collar clamps and mounts to secure them in place. Available in two finishes - painted black or powdercoated black (add +2 week to lead-time for powdercoating). Note: our painted *AND* powdercoated versions have a very slight texture to it, which helps to resist marring when mounting baskets/etc on and off from the bars. Learn More
  29. "Land Rover 90" Oval Badge (Cast Aluminum)

    "Land Rover 90" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  30. "Land Rover 110" Oval Badge (Cast Aluminum)

    "Land Rover 110" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  31. "Land Rover 130" Oval Badge (Cast Aluminum)

    "Land Rover 130" Oval Badge (Cast Aluminum)

    $70.00

    Reproduction badge from the original pattern equipment used to make these initially for Land Rover. Cast in high quality aluminum with a powdercoated finish for durability. Measures 7-1/4" long x 4-1/8" high x 3/16" thick. Learn More
  32. Rear Wash/Wipe Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    Rear Wash/Wipe Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    $80.00

    Upgrading the factory wash/wipe Carling switch, from the clunky factory knob & switch (original part #PRC4454 & PRC4449) is a popular upgrade. Our harness combines the reliability of the Carling Hazard Switch with an easy way to swap out your old hazard switch with our plug-and-play replacement. For imported / Rest of World (ROW) trucks only, will NOT fit North American Spec (NAS) vehicles). Learn More

32 Item(s)

per page

List  Grid 

Set Ascending Direction