Search results for 'defender 130'
-
![LED Interior Light for Land Rover Defender (Warm White) [***1-2 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/1/5/158fef351ba087.jpg)
LED Interior Light for Land Rover Defender (Warm White) [***1-2 WEEK LEAD-TIME***]
$155.00LEDs are not only popular in headlights and signal lamps, but also advantageous in the interior of the vehicle. The LED interior light is a simple "plug and play exchange" for the existing interior lights (front or rear) of the Land Rover Defender SW. Simply remove the original cover and the lamp of the previous factory unit (AMR3155) are removed, install the LED unit, and all previous functions of the interior light (on / off / door opening) are retained. In addition, the lighting can be switched over to a "red light" to preserve night vision (activated via the red push button). If the interior light is switched off, it will accept the last selected light color the next time the lamp is switched on. Learn More -
High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38
$225.00High Torque Gear Reduction Starter for the Land Rover trucks. This modern starter will amaze you every time you turn the key...no longer will you have to cross your fingers, and hope that your truck will start (either in the driveway, or out on the trail). Learn More -
Weld-In Fill Plug for differential/axle housing (includes plug) - Series/Defender/Discovery/RRC
$40.00This is a weld-in steel fill plug bung for a Defender/Discovery/RRC axle housing, for use in either replacing a factory fill plug hole or for upgrading to "sewer cap" axle covers. Includes (1) machined fill plug 'bung' and also includes (1) fill plug [Land Rover part# 608246]. Learn More -
Land Rover Defender Keychain "Four Wheel Drive Station Wagon"
$42.50Land Rover "Four Wheel Drive Station Wagon" Keychain, a nice complement to any Rover to proudly display your keys. Keychain tag measures approximately 2" long, and includes a 1" keyring. Learn More -
Rear Load Bay Sill for Land Rover Defender (stainless steel)
$60.00Rear Load Bay Sill in stainless steel, replaces the original rear load bay sill which is prone to rust. Fitting holes identical to original sill for ease of fitting, and is supplied with stainless steel mounting hardware. Learn More -
Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)
$150.00Stainless Steel screw set to do the Door Hinges ONLY for a Land Rover Defender 90 NAS (North American Spec) Station Wagon (SW) vehicle. Includes the factory correct reproduction hardware to do (1) set of front doors and the rear SW door only. Also includes anti-seize paste. Learn More -
Isolating Nylon Washer for Defender NAS Roll Cage bolts (*sold individually*)
$1.00REPLACEMENT ISOLATING NYLON WASHER FOR NAS ROLL CAGE BOLTS. PRICE LISTED IS PER UNIT (i.e. -1- washer). Learn More -
Land Rover Defender Flexible Radio Antenna - AM / FM / DAB / DAB +
$140.00This radio antenna has excellent radio reception and scores with high-quality optics. Since conventional antenna feet are usually a little too large, this custom foot fits perfectly into the original opening in the fender of the Land Rover Defender. The Defender antenna is suitable for all Land Rover Defender 90/110/130 with existing antenna or antenna bore, and the robust antenna is particularly suitable for off-road use and offers extensive reception of AM, FM, DAB, DAB+. Learn More -
Leather center insert for MOMO Sport Steering Wheel, Land Rover Defender
$100.00Cover with integrated original Land Rover emblem for the MOMO steering wheel, suitable for Land Rover Defender 90/110/130. Made of real leather with great feel and a sophisticated decorative stitching, replaces the "horn button", available in different colors. Learn More -
Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat)
$275.00Stamped 16-gauge aluminum sheet (~0.05" thick), and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 with air conditioning (NOTE: also fits the standard/stock Defender front end of vehicles *without* the A/C bumpout). Learn More -
![ANR Classic Steel Rim 16" x 8" [***SPECIAL PROMO PRICING***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/a/n/anr8x16-g.jpg)
ANR Classic Steel Rim 16" x 8" [***SPECIAL PROMO PRICING***]
Regular Price: $300.00
Special Price $275.00
ANR Classic 16" x 8" steel rim, based on the popular original ANR1534 steel wheel that came stock on NAS 110s and Defender 130s, but with an 8" rim width to accommodate larger tires if desired. These ANR rims will fit on various years of Defender 90/110/130s, Series trucks, Discovery 1's, and Range Rover Classics that share the same bolt pattern. Classic in design, versatile in use, strong in performance....the ANR Classic 16x8 refines almost every Defender look. These rims have a zero offset to ensure a discreetly wider track and the selection of suitable tire sizes also guarantees a wide range of options in terms of performance. These are DOT approved & stamped. Learn More -
RAM Mount ball and adapter for Land Rover Defender Td4/Puma (from MY2007-2015)
Regular Price: $75.00
Special Price $65.00
Easy to fit (1") RAM Mount ball adapter, replaces the original bolt from the passenger-side grab bar/handle, for all Land Rover Defender Td4/Puma (from model year 2007-2015/2016). Extremely sturdy, and easy to remove...and once fitted will allow you to fasten a smartphone, tablet, GoPro, GPS, CB, iPad, or any similar device using standard RAM mount brackets. Learn More -
Side storage locker/box for Land Rover Defender 110 (stainless steel & black powdercoated - fits back left of vehicle)
$950.00Our storage locker offers a significant increase in storage space - which is also accessible from the outside. Ideal for storing spare parts, tools, boots, etc. The box itself is made entirely of stainless steel, waterproof and lockable. The side storage compartment is mounted on the Land Rover Defender 110 4- and 2-door in the rear left fender or the 2-door in the sides (sorry, will not fit a Defender 90). Learn More -
![Leather center insert for RAID sports steering wheel, Land Rover Defender [***CUSTOM ITEM MADE TO ORDER, ~4-6 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/s/l/slr-defhkllr-bbs-lederabdeckung-f-r-sportlenkrad-raid-defender-schwarz-2-wz.jpg)
Leather center insert for RAID sports steering wheel, Land Rover Defender [***CUSTOM ITEM MADE TO ORDER, ~4-6 WEEK LEAD-TIME***]
$100.00Cover with integrated original Land Rover emblem for sports steering wheel RAID, suitable for Land Rover Defender 90/110/130, made of real leather with great feel and a sophisticated decorative stitching, replaces the "horn button", available in different colors. Learn More -
Defender Headlight Surrounds (set of 2)
$750.00These are replacement headlight bezel finisher/surrounds for a Land Rover Defender, CNC milled from a one-piece 3" thick block of billet aluminum. These are a perfect complement to our SDO Defender Front Grille, and are likewise powdercoated black for a durable finish. Available with three different design options for the area between the marker lights & turn-signal lights - SOLID, VENTED, or POCKET MILLED. The factory headlight surrounds are extremely flimsy plastic, and tend to crack, break, and become brittle over time. Our solid aluminum headlight surrounds are a great upgrade to any Defender, and a durable solution that will last a lifetime. Learn More -
Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)
$275.00Upgraded silicone replacement for the Intake Plenum Hose (original part #ESR1316) for the 1993/1994/1995/1997 NAS (North American Spec) Land Rover Defender 90/110 with the 3.9L or 4.0 EFI V8 motor. These replacement hoses are constructed from a 4-layer heavy duty silicone that is ~5mm (3/16") thick, and can withstand temperature ranges from -50F to +350F. Unit comes with (2) hose clamps for easy installation. Learn More -
Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130
Regular Price: $125.00
Special Price $100.00
Stainless steel mud flap mounts/brackets for Land Rover Defender 110/130 (all model years), for left and right rear tires (mirror inverted). Supplied as a set of 2, in bare stainless steel, dimensions approx. 17" x 4.75" x 2.5" (440x120x65mm). Learn More -
Tailgate Organizer for Land Rover Defender
$275.00Where to put all the little odds and ends in an expedition vehicle? First-aid kid, multimeter, work gloves, winch controls, tire repair kit, etc....all these things have to be put somewhere. Our tailgate organizer makes use of the mostly unused space on the rear door. In several pockets attached with MOLLE attachment system you can store away all these bits and pieces which then are at hand once needed. Learn More -
Heritage Style Headlight Surrounds, aluminum with inlet gills (pair, black or silver powdercoat)
$475.00These are replacement headlight surrounds for any 1983-2015 Land Rover Defender 90/110/130, in the Heritage style originally from Land Rover. Made from stamped 16-gauge aluminum sheet, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware. This version has the inlet "gills" between the marker lights (versus our other version with the inlet "squares"). Learn More -
![Heritage Style Headlight Surrounds, aluminum with inlet squares (pair, black or silver powdercoat) [***1-2 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/1/4/142539301431.png)
Heritage Style Headlight Surrounds, aluminum with inlet squares (pair, black or silver powdercoat) [***1-2 WEEK LEAD-TIME***]
$475.00These are replacement headlight surrounds for any 1983-2015 Land Rover Defender 90/110/130, in the Heritage style originally from Land Rover. Made from stamped 16-gauge aluminum sheet, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware. This version has the inlet "squares" between the marker lights (versus our other version with the inlet "gills"). Learn More -
![Window Grille for Land Rover Defender 90/110 Station Wagon [***4-6 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/f/e/fenstergitter-fgdef-defender-4-wz.jpg)
Window Grille for Land Rover Defender 90/110 Station Wagon [***4-6 WEEK LEAD-TIME***]
$200.00Window grille, for Land Rover Defender 90/110 Station Wagon (SW), for the rear side windows. Made from anodized aluminum and powdercoated black. Please note price is per side/unit, so (2) will be required to fit a standard Station Wagon configuration. Includes mounting rivets, but please also see our alternative "Security mounting kit" for the window grilles that include security-head Torx screws & mounting rivnuts. Learn More -
Security Mounting Kit for 90/110 SW Window Grille
$32.50Optional security mounting kit for the Window Grilles for the Land Rover Defender 90/110 Station Wagon. Kit consists of security-head Torx screws, mounting rivnuts, and Torx bit. Please note the price for the kit is per *each* unit/grille, (2) mounting kits required to do both windows for a Station Wagon configuration. Learn More -
Defender 110 Door Hinge Stainless Hardware (Front Doors, Second Row Doors & Rear Door)
$155.00Complete set of screws for 4 doors and tailgate - Land Rover Defender 110. Includes the hardware to do (1) set of front doors, (1) set of 2nd row doors, & rear door. Also includes anti-seize paste. Learn More -
Black Oxide Stainless Steel Nyloc Nut for Defender NAS Roll Cage Bolts (*sold individually*)
$3.50REPLACEMENT NYLON LOCK NUT FOR NAS ROLL CAGE BOLTS. PRICE LISTED IS PER UNIT (i.e. -1- nut). Learn More -
Dash Panel & Interior Lights Wiring Harness (*includes* Carling Switch & Multiplug)
$65.00Failure of the factory switch that controls the Dash Lamp/Panel Lights & Interior Lights (corresponding to original part #PRC7371, generally used on Defender vehicles through the 1994 model year) is a common issue. Our custom harness combines the reliability of the Carling Switch with an easy way to swap out your old Dash Lamp/Panel Lights & Interior Lights switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a switch that has already failed. We utilize specialty 3.0mm male pin connectors on the end of the harness that specifically mate up directly into the female openings in the Rover plug. Learn More -
Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)
Regular Price: $225.00
Special Price $200.00
Conversion kit for all Land Rover Defender 90/110 all model years with rear station wagon door. This conversion kit is for mounting on the TOP on the rear door, and includes stainless steel mounting hardware. This replaces the bottom checkstrap with a TOP mount Gas Strut, with a soft-stop function that keeps the door reliably open. Damper functions properly even with our spare tire carrier mounted to the rear crossmember. Learn More -
![CargoBear - Crossbar - for Land Rover Defender [***4-6 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/c/a/cargobear-dachb-gel-1-st-wz.jpg)
CargoBear - Crossbar - for Land Rover Defender [***4-6 WEEK LEAD-TIME***]
$600.00If you do not need an entire roof rack on your Land Rover Defender because you only want to mount a roof tent on two cross beams, for example, the CargoBear crossbars are ideal! They are identical to the cross bars of the CargoBear Roof Rack. Learn More -
DIN bay for Land Rover Defender Puma/Td4
$100.00DIN bay for mounting under the glove box, for vehicles from model year 2007+ with 2.4l and 2.2l engine, ideal for installation of CB, radio or switches .< Learn More -
CargoBear - Rear Valence for Defender Roof Rack
$250.00This CargoBear Rear Valence end plate for the Defender adds the finishing touch to the design of the already extremely attractive Roof Rack. This end plate has an integrated a handle on both sides that makes climbing the rack much easier and safer. It also extends the usable "rear area" by another 9 cm and offers additional space for attaching work LEDs, attachments, lashing points and similar. Learn More -
Defender Rear Station Wagon Door Gas Strut 2.0 (from MY2002)
$150.00Conversion kit for all Land Rover Defender 90 / 110 models from Model Year 2002 with rear station wagon door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. Learn More -
Tailgate Organizer / Rear Door for New Defender (L663 from Model Year 2020)
Regular Price: $250.00
Special Price $225.00
Tailgate Organizer - Rear door storage system for the NEW Defender from 2020 onwards. The Tailgate Organizer makes use of the mostly unused space on the tailgate, allowing storage of gear such as First-aid kits, multimeters, work gloves, winch controls, tire repair kits. Learn More -
Defender Console - Upper Dash Mount (Radio Housing)
$75.00Recreated from the original Defender radio console/tray for those Land Rover owners looking to retain a classic factory-fitted appearance to their radio installation, install auxiliary gauges, switches, CB, or similar. Learn More -
![Extended (wide) wheel arches / fender flares for Land Rover Defender (Set of 4) [***4-8 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/t/e/template-product8-1-logo_4.jpg)
Extended (wide) wheel arches / fender flares for Land Rover Defender (Set of 4) [***4-8 WEEK LEAD-TIME***]
$750.00Extended / wider fender flare arches you gain an additional ~1.25" of cover, suitable for fitting larger tires/etc to a Land Rover Defender through Model Year 2016. Learn More -
CargoBear Wind Deflector for Defender - CargoBear roof racks
$250.00Front 'Wind Deflector' to fit the CargoBear 1.0/2.0 for the Land Rover Defender. Made from aluminum and powdercoated black, includes mounting hardware. Learn More -
Land Rover Defender 90/110/130 Phone Dash Mount, aluminum (fits model years 1983-2006)
Regular Price: $175.00
Special Price $160.00
This custom phone mount was designed to be used with the Land Rover Defender dash (model year 1983-2006), and fits to the vehicle without any modifications (simply remove the factory screw in the middle of the center dash, and replace with our included kit & hardware). Learn More -
Station Wagon - Defender Rear Speaker Panels
Regular Price: $150.00
Special Price $125.00
The Station Wagon Rear Speaker Panels have been designed so you can install a larger 130mm (5.25in) speaker into the rear body corner of the Land Rover Defender. The standard Defender speakers are 100mm (4in) which both restricts the speaker performance and limits your choice of aftermarket speaker upgrade. Fitting is by simple screw fixing....we include full color instructions and fitting materials. Learn More -
Land Rover Defender Console (Center Dash) 1983-1998
$125.00The Defender Centre Console solves the problem of where to mount those extra switches and gauges in the Defender dashboard and is supplied as a blank molding to provide the user with the flexibility to create their own unique dash layout that best satisfies their requirements. FITS MODEL YEAR: Defender 1983-1998, Series III 1972-1985. Learn More -
Defender Soft Top Windscreen Trim Kit (NAS 90)
$1,075.00Replacement Windscreen Trim Complete Kit for 1994-1997 NAS 90 Soft Top Defender, the complete kit includes (3) separate pieces and is a direct fit. Learn More -
Running Boards (round tubular) - for Land Rover Defender 90/110
Regular Price: $800.00
Special Price $700.00
Round tubular running boards to fit either Land Rover Defender 90 or 110 (select option at checkout). These are powdercoated black, and include with (natural) chequer plate tread overlays (natural), sold as a pair. ***4-8 WEEK LEAD-TIME***. Learn More -
![CargoBear 2.0 - Modular Roof Rack System for Land Rover Defender [***4-8 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/t/e/template-product12-3-logo_1.jpg)
CargoBear 2.0 - Modular Roof Rack System for Land Rover Defender [***4-8 WEEK LEAD-TIME***]
$1,950.00The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powdercoated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.35" (60mm) above the roof height, making them one of the thinnest roof racks on the market. Learn More -
Fuel Filler Door Gas Cover Cap for Land Rover Defender 90/110 (Defendoor)
$35.00The Defender fuel cover for the body opening is as simple as it is effective when it comes to keeping out water, snow, ice, salt, spray, mud and dust. Made from high-quality, slightly flexible plastic and is held securely in position by the groove all the way around it. Learn More -
Defender Dashboard Coin Tray (replaces factory ash tray) Land Rover 90/110/130
$35.00This little known Land Rover part became available on later model Td5 Defenders and replaces the standard fitment ashtray on top of the Defender dashboard with a useful coin tray. To fit the Defender coin tray simply remove the ashtray and the metal securing clip from the dashboard, and insert the coin tray.....literally fits in seconds! Learn More -
Aluminum Rear Step Station Wagon (black powdercoat) - Land Rover Defender 90/110
$180.00Aluminum Rear Step for Land Rover Defender 90 & 110 Station Wagon (SW) vehicles. Allows easy access to the roof rack or ladder, and is made from high quality aluminum powdercoated black. Unit bolts directly to the rear crossmember, and includes all necessary mounting hardware & brackets Learn More -
Anti-Theft Bonnet Hinges for Land Rover Defender
$125.00Anti-Theft bonnet hinges for the Land Rover Defender (all models, all model years) address the issues of instability on the factory hinges (they tend to have "play" on them), as well as they deter theft. No additional mounting holes needed, simply use the existing holes, and mount with the included security bit that is included. Available in natural stainless steel or black powder coating. Learn More -
![Anti-Rattle Window Channel Kit (for Soft-Top / Removable Door Tops) [Garrison]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/r/e/removable-top_1_2.jpg)
Anti-Rattle Window Channel Kit (for Soft-Top / Removable Door Tops) [Garrison]
$130.00This proprietary rubberized window channel replaces the inferior factory felt lining in Land Rover Defender removable door tops and eliminates the famous glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More -
![Anti-Rattle Window Channel Kit (for Station Wagon / Rear Sliding Windows) [Garrison]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/r/e/rear-sliding_1_2.jpg)
Anti-Rattle Window Channel Kit (for Station Wagon / Rear Sliding Windows) [Garrison]
$130.00This unique rubberised extrusion replaces the factory felt lining in Land Rover Defender rear sliding windows and eliminates the irritating glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More -
Stainless Steel Nyloc Nut for Defender NAS Roll Cage Bolts (*sold individually*)
$2.50REPLACEMENT NYLON LOCK NUT FOR NAS ROLL CAGE BOLTS. PRICE LISTED IS PER UNIT (i.e. -1- nut). Learn More -
NAS Soft-Top Rear Speaker Panels
$225.00These are replacement speaker housings for the North American Specification (NAS) Defender 90 Soft-Top models, to replace original part #AWR1550LNF and AWR1551LNF. The apertures within the housing will accept a 5.25" speaker and include the slots for the rear seatbelt trim/insert, and the speaker housings can also be trimmed slightly to also accept a 6.5" speaker (as pictured). Also available in a speaker "blank" with no cutout as well. Learn More -
Dash Center Face Plate Panel (NAS configuration w/ VDO clock cutout)
$85.00Dash Center Face Plate Panel (NAS configuration w/ VDO clock) for Land Rover Defender. Learn More -
NEW Defender (model year 2020+) 2nd Row Doors Window Vents (set of 2)
$135.00MODEL YEAR 2020+ NEW DEFENDER 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More -
"Series-Defender Outfitters" logo tubular Neck Gaiter / Bandana / Face Mask
Regular Price: $8.00
Special Price $5.00
Seamless tubular neck bandana (gaiter) featuring the "Series-Defender Outfitters" logo all the way around. Made from Polyester microfiber material, with a soft texture and ability to stretch is great to use as a neck warmer, face covering, head band, and similar. Measures 19" x 10", one size fits all. Learn More -
Defender Tunnel Tray for Land Rover Defender 90/110/130 (Left-Hand Drive / LHD, R380)
$90.00The Defender Tunnel Tray has been designed to fit on top of the transmission tunnel of all Land Rover Defenders (90, 110, 130) fitted with the R380 gearbox (Tdi, Td5 , and most V8 models). Unfortunately the Tunnel Tray will *NOT* fit the LT77 transmission tunnel or the early factory V8 engine vehicles fitted with the LT85 gearbox. Learn More -
Defender Tunnel Tray for Land Rover Defender 90/110/130 (Right-Hand Drive / RHD, R380)
$90.00The Defender Tunnel Tray has been designed to fit on top of the transmission tunnel of all Land Rover Defenders (90, 110, 130) fitted with the R380 gearbox (Tdi, Td5 , and most V8 models). Unfortunately the Tunnel Tray will *NOT* fit the LT77 transmission tunnel or the early factory V8 engine vehicles fitted with the LT85 gearbox. Learn More -
![Protective Guard/Grilles for Signal Indicator, for Land Rover Defender [***3-4 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/t/e/template-product4-3-logo_19.jpg)
Protective Guard/Grilles for Signal Indicator, for Land Rover Defender [***3-4 WEEK LEAD-TIME***]
Regular Price: $150.00
Special Price $140.00
The protective grilles for the signal indicators of the Land Rover Defender 90/110/130 are both for protection of the indicators against damage (e.g. by branches), but also an aesthetic design element to compliment the classical optics of the vehicle. Learn More -
-
Adult T-Shirt: Heather Grey (lightweight)
$20.00Adult T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Lightweight 4.5oz fabric. Learn More -
Dorman Clutch Master Cylinder Conversion Kit
Regular Price: $199.00
Special Price $190.00
We have modified a cast-iron Dorman master cylinder that is much more robust than the factory master cylinder, and significantly less prone to the inner wall wearing. This replaces the original Land Rover Clutch Master Cylinder, and our direct drop-in replacement kit includes the modified Dorman Clutch Master Cylinder, new pushrod with stainless hardware, and a braided stainless steel line to replace the factory "hard line" running from the master cylinder to the junction/union located on the bulkhead wall. Fit's late-IIA & III Series (1971-1984) and pre-Puma Defender (1983-2006). Learn More -
Adult T-Shirt: Euro-Oval "SDO" Heather Grey (lightweight)
$20.00Adult T-Shirt bearing the "SDO" Euro-Oval style logo (and Series-Defender Outfitters name and website) on the back, with a smaller logo above the breast on the front. Available in various sizes. Lightweight 4.5oz fabric. Learn More -
Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)
Regular Price: $250.00
Special Price $225.00
This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More -
Defender 90 SW Stainless Hardware Kit (Exterior)
Regular Price: $225.00
Special Price $200.00
This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More -
Defender & Series II/IIA/III Stainless Steel Vent Hinge Pins
$35.00A set of 4 Defender Stainless Steel Vent Hinge Pins, this kit contains (4) total pins/screws with (10) total nuts - 2 extras are included as a bonus. These Vent Hinge Pins will fit all pre-2007 model year Defenders. Will also fit Series II / IIA / III vehicles. Learn More -
Defender 2nd Row Doors Window Vents (set of 2)
Regular Price: $135.00
Special Price $125.00
Defender 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More -
Carling Contura II REAR WASH-WIPE Switch
$37.50Carling Contura II REAR WASH-WIPE Switch. Learn More -
LT230 Transfer Case Increased Capacity Sump Cover
$275.00Increased capacity (21oz) sump cover designed for the Land Rover LT230 transfer case, CNC milled from a solid block of aircraft grade aluminum. Compatible with all model years of the Land Rover Defender and Discovery, and will fit either diesel or V-8 motors, and has a "blank" pocket milled into the side of the unit for folks that may want to drill and tap an oil temperature gauge sending unit. Learn More -
Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets
Regular Price: $475.00
Special Price $400.00
Aluminum Steering Guard / Skid Plate and Mounting Brackets, fits ALL model years of the Land Rover Defender from 1983 to present. The units are constructed from 1/4" (6mm) aluminum high-strength alloy, and the side mounting brackets are 1/4" (6mm steel) that are galvanized and then powder coated black. Skid Plate is available in either silver anodized, or an optional black powder coated version. PLEASE NOTE: if you have a 1997 NAS 90 Defender, the mounting brackets will have to be notched slightly in order to clear the transmission cooler lines at the front of the vehicle. Learn More -
Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard
$175.00Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard, fits ALL model years of the Land Rover Defender from ~1986 to present. The units are constructed from 4mm steel with a galvanized finish to protect it from corrosion, and also includes the mounting hardware. The track rod guard encloses the exposed rod and protects it from damage in rough terrain or off-road situations. Learn More -
Carling Contura II Hazard Switch
$37.50Carling Contura II Hazard Switch for Land Rover Defender. Learn More -
Seat Back Trim Rubbing Strip (set of 2)
$95.00CNC milled aluminum replacement seat trim rubbing strips (SET of 2) Learn More -
LHD Lower Dash Switch Plate Panel (3 Carling)
$45.00NAS [North American Spec] or LHD (Left Hand Drive) Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More -
300Tdi/Td5/Puma Side Air Intake Vent Grille
$100.00Land Rover Defender 300Tdi / Td5 / Puma Side Air Intake Vent Grille (milled aluminum) Learn More -
Soft Top Clips (rear window tailgate crossbar retaining clips)
$95.00Land Rover Defender rear window / rear tailgate crossbar soft-top retaining clips. Made from solid billet aluminum and powdercoated black. Learn More -
200Tdi / 2.5TD Side Air Intake Vent Grille
$100.00Land Rover Defender 200Tdi / 2.5TD Side Air Intake Vent Grille (milled aluminum) Learn More -
Dash Center Face Plate Panel (NAS standard)
$85.00NAS 90 Dash Center Face Plate Panel (milled aluminum) for Land Rover Defender. Learn More -
Youth T-Shirt: Royal Blue-Youth XS (2-4)
$15.00Youth T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. NOTE: FOR CHILDREN / YOUTH ONLY. Learn More -
Wingtop Vent (standard RIGHT-SIDE ONLY)
$95.00CNC milled aluminum replacement wingtop vent (RIGHT-SIDE ONLY) Learn More -
Wingtop Vent (standard LEFT-SIDE ONLY)
$95.00CNC milled aluminum replacement wingtop vent (LEFT-SIDE ONLY) Learn More -
Dash Center Face Plate Panel (VDO Gauges)
$85.00Dash Center Face Plate Panel (VDO / Round Gauges) for Land Rover Defender. Learn More -
Dash Center Face Plate Panel (6 Carling)
$85.00Dash Center Face Plate Panel (6 Carling Switches) for Land Rover Defender. Learn More -
Interior Door Pull/Grab Handles (set of 2)
$140.00CNC milled aluminum replacement interior door handles (SET of 2) Learn More -
RHD Lower Dash Switch Plate Panel (3 Carling)
$45.00RHD [Right Hand Drive] Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More -
Defender Stainless Steel Spare Tire Carrier for Station Wagon
$1,800.00Stainless Steel Spare Tire Carrier for Land Rover Defender Station Wagon (SW) vehicles. Mounts on the rear crossmember and bolts through the door, and relieves the stress of the weight of the spare tire which is known over time to crack the door frame structure. The carrier is mounted on the rear cross member, and a plate is fitted to the existing holes on the rear door, and connects to the unit by means of two stainless steel rod ends with the carrier. Available in two colors, natural stainless steel or black powdercoat. Learn More -
Rear / 2nd Row Door Opening Angle Kit for Land Rover Defender 110 / 130
$155.00This stainless steel door opening angle kit allows you to open the rear / second row doors on a Defender 110 or 130 Crew Cab to a maximum angle of 95°. This provided more convenient ingress and egress for passengers, but also more room to access and load gear in and out of the rear doors (coolers, fridges, storage cases, etc). Easy installation with no drilling required, as it bolts to the original mounting points. Fits all model years of the Land Rover Defender 1983-2015. Learn More -
Spacers for rear axle sway bar, for Defender 90/110/130
$90.00The spacers prevent folding of the rear stabilizer sway bar for higher/lifted vehicles. Fits all model years Land Rover Defender 90/110/130 (*except* 1994/95/97 NAS 90). Spacers made from stainless steel, and includes required mounting hardware. Learn More -
Axle bridge joint (A-arm / A-frame ball joint) greasable with 45° operating range
$175.00A-frame ball joint with 45° working range, for improved articulation of the rear axle, with integrated grease zerk fitting, suitable for Land Rover Defender 90/110/130, Discovery and Range Rover Classic.
The axle link replaces the original part and offers a much higher articulation due to its 45° operating range (compared to approx. 30° with the original part). The joint can be used with the standard running gear, or with lifted suspension systems and also with cranked trailing arm links. Learn More -
Stainless Steel Replacement Td5/Tdci Fuel Tank for Land Rover Defender 110/130
$2,950.00Stainless steel replacement tanks for the Land Rover Defender 110/130 Td5/Tdci. Available in 100L, 120L, and 150L sizes. PLEASE NOTE: this is a special-order item only, lead-time is generally a minimum of 4-8 weeks. Learn More -
Defender Cubby Box Console Base / Security Console
$400.00Cubby Box Console Base / Security Console for all Land Rover Defender 90/110/130 (all years), the unit mounts below the factory cubby box / center console, and has a concealed lock to ensure safety & security of the contents. The Console Base will raise the console approximately 5” to provide a better arm rest height while also giving additional discreet storage beneath the cubby. Available with optional Blue Sea 12V and USB sockets, and/or 20amp rocker switches. Learn More -
"Curry Hook" Shopping bag holder, double hook
$10.00A truly practical and useful accessory for your Defender - and probably the most affordable one. This versatile hook can be attached to almost any surface that is self-supporting or solid. With this easy-to-install hook, you have a secure fix point for your jacket, shopping back, refuse bag, or similar. No more rolling shopping bags in the passenger's footwell! And the best: This hook fits perfectly to the interior of the Defenders. Includes (1) unit/hook. Learn More -
![Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top [***6-8 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/r/e/reserveradtr-ger-softtop-3-wz.jpg)
Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top [***6-8 WEEK LEAD-TIME***]
$1,850.00To remove the spare tire from the interior of the Land Rover Defender Pickup (DCPU) or Soft-Top vehicle, and to keep the classic Defender look, we have adapted our proven spare wheel carrier to fit the pickup configuration. This swing-away tire carrier is opened independently of the tailgate, is rattle-free and completely made of stainless steel. NOTE: this will *not* fit the Defender HiCapacity (Hicap, HCPU) Pickup configuration. Available in two finish options, natural stainless steel or black powdercoat. Learn More -
Carling Contura II OFF-MOMENTARY Switch
$25.00Carling Contura II OFF-MOMENTARY Switch. Momentary switch which can be used as either a fog switch on the later Defender, or simply as a horn function. Learn More -
Defender Rear Station Wagon Door Gas Strut (up to MY2001)
$125.00Conversion kit for all Land Rover Defender 90/110 to model year 2001 with rear station wagon door. Replaces the anchor with a special gas pressure shock with soft-stop function, which keeps the door reliably open. Learn More -
Dash Center Face Plate Panel (VDO-2x 12v-VDO)
$85.00Dash Center Face Plate Panel (2x VDO / Round Gauges & 2x 12V socket) for Land Rover Defender. Learn More -
Dash Center Face Plate Panel (VDO-3x Carling-VDO)
$85.00Dash Center Face Plate Panel (VDO-3x Carling Switches-VDO) for Land Rover Defender. Learn More -
High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)
$6.00This replacement bolt corresponds to the original Land Rover part number ALR5549, and these are stainless steel replacements used to attach a NAS roll cage to a Defender. Please note that this replacement hardware is a HIGH TENSILE STAINLESS STEEL in Grade A2-80 providing a minimum tensile strength of approximately 115,000 psi. Available in bare stainless or black oxide finish. Price per piece, optional add-on replacement nyloc nut & isolating washers also available. Learn More -
Ignition Switch Wiring Harness (bypass)
$125.00Delamination of the Ignition Switch #PRC8230 is a common issue. Switching to “push button start” is an easy way to circumvent this ignition switch and avoid potential issues going forward. This can be achieved by wiring in a Carling OFF-ON-MOMENTARY switch in place of the ignition switch. This harness allows the "plug-and-play" changeover to a push-button start on a Land Rover Defender. Learn More -
Seat Risers / Rail Extensions (stainless steel, powdercoated black)
$115.00Seat risers / rail extensions that raise the seat approximately 2" (50mm), suitable for Land Rover Defender 90/110/130 (all model years 1985-2015, except for ex-MOD/military vehicles). Made of stainless steel, black powder coated, and price is for a set to do (1) single seat - includes fastening hardware. Learn More -
Mounting Plate for heater
$75.00Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More -
Lug nut set (23 pieces), galvanized & black passivate plated
$125.00Steel lug nut set (23 pieces total), that are galvanized and then black passivate coated for maximum corrosion resistance. Suitable for Land Rover original steel wheels and other steel wheels, will NOT fit alloy wheels/rims. Fits Defender, Series 2A/3, Discovery 1, and Range Rover Classic. Lugs are same fit as Land Rover part# 576103, RRD500010. Learn More -
Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)
$400.00This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
Learn More -
Defender 90/110 INTERIOR Stainless Hardware Kit
$175.00This is an INTERIOR ONLY stainless steel bolt/screw hardware kit to fit a Land Rover Defender 90/110, and contains approximately 360 pieces. All bolt packages are clearly labeled and packaged for ease of installation (16 separate packages). The kit includes stainless hardware for: Lower Dash, Instrument Panel, Heater Controls & Center Dash, Dash & Visors, Demister/Defrost Vents, Windshield Pillars, Driver Side End Cap, Tray Trim, Door Panels (ST), Check Strap & Cover, Kick Panel Trim., Floor Pans, Door Sills, Rear Fender Brackets, Seat Rail Bolts, Rear Door Trim (if applicable). Learn More -
Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender
$145.00Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) Mounting Screw Kits, enough to do a full set of headlights for one vehicle. The Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
Shop By
Shopping Options
- Category
-
- Front Grille & Surrounds (5)
- Wingtop & Intake Vents (6)
- Exterior (36)
- Interior (32)
- Switch Plates (13)
- Mechanical (13)
- Badges-Etc (4)
- Roof Racks (4)
- ALL (100)
- Other Vehicles (1)
Newsletter
My Cart
You have no items in your shopping cart.
