Custom Land Rover Series & Defender Parts

Search results for 'fender'

100 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Land Rover Defender (or Series) Keychains

    Land Rover Defender (or Series) Keychains

    $40.00

    Land Rover Keychains a nice complement to any Land Rover Defender or Series truck (or any other Rover model!) to proudly display your keys. Available in either the "Solihull" or "Four Wheel Drive Station Wagon" configuration [options selected at checkout]. Keychain tag measures approximately 2" long, and includes a 1" keyring. Learn More
  2. Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    $85.00

    Dash Center Face Plate Panel (VDO-3x Carling Switches-VDO) for Land Rover Defender. Learn More
  3. Side storage locker/box for Land Rover Defender 110 (stainless steel & black powdercoated - fits back left of vehicle)

    Side storage locker/box for Land Rover Defender 110 (stainless steel & black powdercoated - fits back left of vehicle)

    $650.00

    Our storage locker offers a significant increase in storage space - which is also accessible from the outside. Ideal for storing spare parts, tools, boots, etc. The box itself is made entirely of stainless steel, waterproof and lockable. The side storage compartment is mounted on the Land Rover Defender 110 4- and 2-door in the rear left fender or the 2-door in the sides (fits 1992 and later vehicles....sorry, will not fit a Defender 90). Learn More
  4. Adult T-Shirt: Military Green-Large

    Adult T-Shirt: Military Green-Large

    $20.00

    Adult T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Learn More
  5. Seat Back Trim Rubbing Strip (set of 2)

    Seat Back Trim Rubbing Strip (set of 2)

    $95.00

    CNC milled aluminum replacement seat trim rubbing strips (SET of 2) Learn More
  6. Defender 2nd Row Doors Window Vents (set of 2)

    Defender 2nd Row Doors Window Vents (set of 2)

    $125.00

    Defender 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  7. Spacers for rear axle sway bar, for Defender 90/110/130

    Spacers for rear axle sway bar, for Defender 90/110/130

    $85.00

    The spacers prevent folding of the rear stabilizer sway bar for higher/lifted vehicles. Fits all model years Land Rover Defender 90/110/130 (*except* 1994/95/97 NAS 90). Spacers made from stainless steel, and includes required mounting hardware. Learn More
  8. Window Grille for Land Rover Defender 90/110 Station Wagon

    Window Grille for Land Rover Defender 90/110 Station Wagon

    $200.00

    Window grille, for Land Rover Defender 90/110 Station Wagon (SW), for the rear side windows. Made from anodized aluminum and powdercoated black. Please note price is per side/unit, so (2) will be required to fit a standard Station Wagon configuration. Includes mounting rivets, but please also see our alternative "Security mounting kit" for the window grilles that include security-head Torx screws & mounting rivnuts. Learn More
  9. Land Rover Defender Flexible Radio Antenna - AM / FM / DAB / DAB +

    Land Rover Defender Flexible Radio Antenna - AM / FM / DAB / DAB +

    $135.00

    This radio antenna has excellent radio reception and scores with high-quality optics. Since conventional antenna feet are usually a little too large, this custom foot fits perfectly into the original opening in the fender of the Land Rover Defender. The Defender antenna is suitable for all Land Rover Defender 90/110/130 with existing antenna or antenna bore, and the robust antenna is particularly suitable for off-road use and offers extensive reception of AM, FM, DAB, DAB+. Learn More
  10. Wingtop Vent (standard LEFT-SIDE ONLY)

    Wingtop Vent (standard LEFT-SIDE ONLY)

    $95.00

    CNC milled aluminum replacement wingtop vent (LEFT-SIDE ONLY) Learn More
  11. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Regular Price: $125.00

    Special Price $115.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Black & Silver oval emblem decal #DAG500140 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  12. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $275.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  13. Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    $160.00

    Aluminum Rear Ladder for Land Rover Defender 90 & 110 Station Wagon (SW) vehicleswill also fit Series hardtop vehicles as well. Allows easy access to the roof rack, and is made from high quality aluminum and TIG welded for strength. The ladder is mounted to the rain gutter at the top utilizing the provided hardware, and does require (2) mounting holes to be drilled into the hard top. Unit weighs just under 4lbs, and is available in two colors either anodized silver or black powdercoat. Also available with *optional* rear step that bolts directly to the rear crossmember. Learn More
  14. Dash Center Face Plate Panel (VDO-12v-VDO)

    Dash Center Face Plate Panel (VDO-12v-VDO)

    $85.00

    Dash Center Face Plate Panel (2x VDO / Round Gauges & 12V socket) for Land Rover Defender. Learn More
  15. Sports steering wheel RAID 1

    Sports steering wheel RAID 1

    $475.00

    A smaller, grippier sports steering wheel is not only a visual enhancement in the Land Rover Defender, but also enhances driving pleasure and safety. At the same time, larger people in particular can enjoy a more relaxed sitting position in the Defenders' slightly cocked cockpit - especially in conjunction with our seat rail extensions and sports seats . The steering wheels of the manufacturer RAID have been a synonym for comfortable, sporty driving for decades! Learn More
  16. Aluminum Rear Step Station Wagon (black powdercoat) - Land Rover Defender 90/110

    Aluminum Rear Step Station Wagon (black powdercoat) - Land Rover Defender 90/110

    $180.00

    Aluminum Rear Step for Land Rover Defender 90 & 110 Station Wagon (SW) vehicles. Allows easy access to the roof rack or ladder, and is made from high quality aluminum powdercoated black. Unit bolts directly to the rear crossmember, and includes all necessary mounting hardware & brackets Learn More
  17. Soft Top Clips (rear window tailgate crossbar retaining clips)

    Soft Top Clips (rear window tailgate crossbar retaining clips)

    $85.00

    Land Rover Defender rear window / rear tailgate crossbar soft-top retaining clips. Made from solid billet aluminum and powdercoated black. Learn More
  18. RHD Lower Dash Switch Plate Panel (3 Carling)

    RHD Lower Dash Switch Plate Panel (3 Carling)

    $45.00

    RHD [Right Hand Drive] Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More
  19. Defender 90 SW Stainless Hardware Kit (Exterior)

    Defender 90 SW Stainless Hardware Kit (Exterior)

    $175.00

    This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  20. Seat Risers / Rail Extensions (stainless steel, powdercoated black)

    Seat Risers / Rail Extensions (stainless steel, powdercoated black)

    $100.00

    Seat risers / rail extensions that raise the seat approximately 2" (50mm), suitable for Land Rover Defender 90/110/130 (all model years 1985-2015, except for ex-MOD/military vehicles). Made of stainless steel, black powder coated, and price is for a set to do (1) single seat - includes fastening hardware. Learn More
  21. Tailgate Organizer for Land Rover Defender

    Tailgate Organizer for Land Rover Defender

    $225.00

    Where to put all the little odds and ends in an expedition vehicle? First-aid kid, multimeter, work gloves, winch controls, tire repair kit, etc....all these things have to be put somewhere. Our tailgate organizer makes use of the mostly unused space on the rear door. In several pockets attached with MOLLE attachment system you can store away all these bits and pieces which then are at hand once needed. Learn More
  22. Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)

    Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)

    $125.00

    Stainless Steel screw set to do the Door Hinges ONLY for a Land Rover Defender 90 NAS (North American Spec) Station Wagon (SW) vehicle. Includes the factory correct reproduction hardware to do (1) set of front doors and the rear SW door only. Also includes anti-seize paste. Learn More
  23. Youth T-Shirt: Royal Blue-Youth XS (2-4)

    Youth T-Shirt: Royal Blue-Youth XS (2-4)

    $15.00

    Youth T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. NOTE: FOR CHILDREN / YOUTH ONLY. Learn More
  24. Demister/Defrost Dash Vent Trim (10.5", set of 2)

    Demister/Defrost Dash Vent Trim (10.5", set of 2)

    $130.00

    CNC milled aluminum replacement defrost dash vent trim (10.5" size, set of 2) - FITS DEFENDER MODEL YEAR 1983-1988 & SERIES III 1973+ VEHICLES ONLY Learn More
  25. Rear / 2nd Row Door Opening Angle Kit for Land Rover Defender 110 / 130

    Rear / 2nd Row Door Opening Angle Kit for Land Rover Defender 110 / 130

    $135.00

    This stainless steel door opening angle kit allows you to open the rear / second row doors on a Defender 110 or 130 Crew Cab to a maximum angle of 95°. This provided more convenient ingress and egress for passengers, but also more room to access and load gear in and out of the rear doors (coolers, fridges, storage cases, etc). Easy installation with no drilling required, as it bolts to the original mounting points. Fits all model years of the Land Rover Defender 1983-present. Learn More
  26. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Natural/Bare Stainless Steel (no additional charge)

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Natural/Bare Stainless Steel (no additional charge)

    $145.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) of the Mounting Screw Kits, and the Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  27. Carling Contura II OFF-MOMENTARY Switch

    Carling Contura II OFF-MOMENTARY Switch

    $25.00

    Carling Contura II OFF-MOMENTARY Switch. Momentary switch which can be used as either a fog switch on the later Defender, or simply as a horn function. Learn More
  28. Dash Panel & Interior Lights Wiring Harness (*includes* Carling Switch & Multiplug)

    Dash Panel & Interior Lights Wiring Harness (*includes* Carling Switch & Multiplug)

    $65.00

    Failure of the factory switch that controls the Dash Lamp/Panel Lights & Interior Lights (corresponding to original part #PRC7371, generally used on Defender vehicles through the 1994 model year) is a common issue. Our custom harness combines the reliability of the Carling Switch with an easy way to swap out your old Dash Lamp/Panel Lights & Interior Lights switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a switch that has already failed. We utilize specialty 3.0mm male pin connectors on the end of the harness that specifically mate up directly into the female openings in the Rover plug. Learn More
  29. DIN bay for Land Rover Defender Puma/Td4

    DIN bay for Land Rover Defender Puma/Td4

    $100.00

    DIN bay for mounting under the glove box, for vehicles from model year 2007+ with 2.4l and 2.2l engine, ideal for installation of CB, radio or switches .< Learn More
  30. Wingtop Vents (standard SET)

    Wingtop Vents (standard SET)

    Regular Price: $190.00

    Special Price $175.00

    CNC milled aluminum replacement wingtop vents (SET) Learn More
  31. Interior Door Pull/Grab Handles (set of 2)

    Interior Door Pull/Grab Handles (set of 2)

    $140.00

    CNC milled aluminum replacement interior door handles (SET of 2) Learn More
  32. Defender Front Grille (w/ cutout for manual bonnet latch)

    Defender Front Grille (w/ cutout for manual bonnet latch)

    $500.00

    Similar to our "standard" SDO Front Grille....BUT this particular unit is designed for those those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle and allows you to manually open the bonnet), versus those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle). This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. Learn More
  33. PREMIUM Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    PREMIUM Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $50.00

    Leather door pulls for the interior with stainless steel covers on the ends, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  34. Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)

    Land Rover Defender NAS V8 EFI Plenum Hose (silicone replacement)

    $275.00

    Upgraded silicone replacement for the Intake Plenum Hose (original part #ESR1316) for the 1993/1994/1995/1997 NAS (North American Spec) Land Rover Defender 90/110 with the 3.9L or 4.0 EFI V8 motor. These replacement hoses are constructed from a 4-layer heavy duty silicone that is ~5mm (3/16") thick, and can withstand temperature ranges from -50F to +350F. Unit comes with (2) hose clamps for easy installation. Learn More
  35. Rear Load Bay Sill for Land Rover Defender (stainless steel)

    Rear Load Bay Sill for Land Rover Defender (stainless steel)

    $50.00

    Rear Load Bay Sill in stainless steel, replaces the original rear load bay sill which is prone to rust. Fitting holes identical to original sill for ease of fitting, and is supplied with stainless steel mounting hardware. Learn More
  36. Adult T-Shirt: Desert Sand-Large

    Adult T-Shirt: Desert Sand-Large

    $20.00

    Adult T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Learn More
  37. Dorman Clutch Master Cylinder Conversion Kit

    Dorman Clutch Master Cylinder Conversion Kit

    $175.00

    We have modified a cast-iron Dorman master cylinder that is much more robust than the factory master cylinder, and significantly less prone to the inner wall wearing. This replaces the original Land Rover Clutch Master Cylinder, and our direct drop-in replacement kit includes the modified Dorman Clutch Master Cylinder, new pushrod with stainless hardware, and a braided stainless steel line to replace the factory "hard line" running from the master cylinder to the junction/union located on the bulkhead wall. Fit's late-IIA & III Series (1971-1984) and pre-Puma Defender (1983-2006). Learn More
  38. Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    Regular Price: $175.00

    Special Price $150.00

    Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard, fits ALL model years of the Land Rover Defender from ~1986 to present. The units are constructed from 4mm steel with a galvanized finish to protect it from corrosion, and also includes the mounting hardware. The track rod guard encloses the exposed rod and protects it from damage in rough terrain or off-road situations. Learn More
  39. Defender 90/110 INTERIOR Stainless Hardware Kit

    Defender 90/110 INTERIOR Stainless Hardware Kit

    $125.00

    This is an INTERIOR ONLY stainless steel bolt/screw hardware kit to fit a Land Rover Defender 90/110, and contains approximately 360 pieces. All bolt packages are clearly labeled and packaged for ease of installation (16 separate packages). The kit includes stainless hardware for: Lower Dash, Instrument Panel, Heater Controls & Center Dash, Dash & Visors, Demister/Defrost Vents, Windshield Pillars, Driver Side End Cap, Tray Trim, Door Panels (ST), Check Strap & Cover, Kick Panel Trim., Floor Pans, Door Sills, Rear Fender Brackets, Seat Rail Bolts, Rear Door Trim (if applicable). Learn More
  40. CargoBear - Modular Roof Rack System for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    $1,500.00

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powder-coated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.35" (60mm) above the roof height, making them one of the thinnest roof racks on the market. Thanks to the lashing rails, you can flexibly secure a roof load anywhere on the rack. Each section is equipped with three plates of coated diamond plate, which can be used and left installed as the "floor" - but not required (in other words you can leave the plates out of the rack, so just the rails are in place with no floor). Whether you need a full-length carrier for your 110 Defender or just a short platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  41. Defender 110 Door Hinge Stainless Hardware (Front Doors, Second Row Doors & Rear Door)

    Defender 110 Door Hinge Stainless Hardware (Front Doors, Second Row Doors & Rear Door)

    $125.00

    Complete set of screws for 4 doors and tailgate - Land Rover Defender 110. Includes the hardware to do (1) set of front doors, (1) set of 2nd row doors, & rear door. Also includes anti-seize paste. Learn More
  42. RAM Mount ball and adapter for Land Rover Defender Td4/Puma (from MY2007)

    RAM Mount ball and adapter for Land Rover Defender Td4/Puma (from MY2007)

    Regular Price: $85.00

    Special Price $75.00

    Easy to fit (1") RAM Mount ball adapter, replaces the original bolt from the passenger-side grab bar/handle, for all Land Rover Defender Td4/Puma (from model year 2007). Extremely sturdy, and easy to remove...and once fitted will allow you to fasten a smartphone, tablet, GoPro, GPS, CB, iPad, or any similar device using standard RAM mount brackets. Learn More
  43. Dash Center Face Plate Panel (12V-Carling-12V)

    Dash Center Face Plate Panel (12V-Carling-12V)

    $85.00

    Dash Center Face Plate Panel (12V-Carling Switches-12V) for Land Rover Defender. Learn More
  44. Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    $130.00

    This proprietary rubberized window channel replaces the inferior factory felt lining in Land Rover Defender removable door tops and eliminates the famous glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  45. SDO GIFT CERTIFICATE

    SDO GIFT CERTIFICATE

    $0.00

    Series-Defender Outfitters gift certificates make great gifts! Learn More
  46. High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    $4.00

    This replacement bolt corresponds to the original Land Rover part number ALR5549, and these are stainless steel replacements used to attach a NAS roll cage to a Defender. Please note that this replacement hardware is a HIGH TENSILE STAINLESS STEEL in Grade A2-80 providing a minimum tensile strength of approximately 115,000 psi. Available in bare stainless or black oxide finish. Price per piece, optional add-on replacement nyloc nut & isolating washers also available. Learn More
  47. High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    $225.00

    High Torque Gear Reduction Starter for the Land Rover trucks. This modern starter will amaze you every time you turn the key...no longer will you have to cross your fingers, and hope that your truck will start (either in the driveway, or out on the trail). Learn More
  48. Adult T-Shirt: Military Green-X-Large

    Adult T-Shirt: Military Green-X-Large

    $20.00

    Adult T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Learn More
  49. Carling Contura II Hazard Switch

    Carling Contura II Hazard Switch

    $30.00

    Carling Contura II Hazard Switch for Land Rover Defender. Learn More
  50. Carling Contura II REAR WASH-WIPE Switch

    Carling Contura II REAR WASH-WIPE Switch

    $30.00

    Carling Contura II REAR WASH-WIPE Switch. Learn More
  51. NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    $500.00

    [THIS ITEM IS CUSTOM MADE TO ORDER, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 3-6 WEEKS]. These crossbars run from the front side rollbars on a NAS (North American Spec) Defender and allow roof racks, baskets, and similar to be mounted safely to the top of your vehicle (note: rack and/or basket NOT included). These units are constructed from 1-1/2" steel tubing, and utilize custom fabrication collar clamps and mounts to secure them in place. Available in two finishes - painted black or powdercoated black (add +2 week to lead-time for powdercoating). Note: our painted *AND* powdercoated versions have a very slight texture to it, which helps to resist marring when mounting baskets/etc on and off from the bars. Learn More
  52. Axle bridge joint (A-arm / A-frame ball joint) greasable with 45° operating range

    Axle bridge joint (A-arm / A-frame ball joint) greasable with 45° operating range

    $175.00

    A-frame ball joint with 45° working range, for improved articulation of the rear axle, with integrated grease zerk fitting, suitable for Land Rover Defender 90/110/130, Discovery and Range Rover Classic.

    The axle link replaces the original part and offers a much higher articulation due to its 45° operating range (compared to approx. 30° with the original part). The joint can be used with the standard running gear, or with lifted suspension systems and also with cranked trailing arm links. Learn More
  53. Security Mounting Kit for 90/110 SW Window Grille

    Security Mounting Kit for 90/110 SW Window Grille

    $32.50

    Optional security mounting kit for the Window Grilles for the Land Rover Defender 90/110 Station Wagon. Kit consists of security-head Torx screws, mounting rivnuts, and Torx bit. Please note the price for the kit is per *each* unit/grille, (2) mounting kits required to do both windows for a Station Wagon configuration. Learn More
  54. Leather center insert for MOMO sports steering wheel, Land Rover Defender

    Leather center insert for MOMO sports steering wheel, Land Rover Defender

    $100.00

    Cover with integrated original Land Rover emblem for the MOMO steering wheel, suitable for Land Rover Defender 90/110/130. Made of real leather with great feel and a sophisticated decorative stitching, replaces the "horn button", available in different colors. Learn More
  55. Dash Center Face Plate Panel (VDO Gauges)

    Dash Center Face Plate Panel (VDO Gauges)

    $85.00

    Dash Center Face Plate Panel (VDO / Round Gauges) for Land Rover Defender. Learn More
  56. Garrison Underseat Storage Case SE

    Garrison Underseat Storage Case SE

    $80.00

    Introducing the innovative Land Rover Defender Underseat Storage Case from Garrison Outfitters®. These cases have been custom designed to fit securely under your Land Rover Defender seat bases to pack additional storage into your vehicle cabin. Secured with 3M® Dual Lock fasteners and Velcro® One-Wrap® straps, these cases install in seconds without the need for tools or modification to your vehicle. Learn More
  57. Defender Military Snow Cowl Cover - Stainless Steel

    Defender Military Snow Cowl Cover - Stainless Steel

    $225.00

    Stainless Steel Military Snow Cowl Cover for the air intake, for Land Rover Defender 90/110/130 (all versions). Includes seal and mounting hardware. Available in natural/bare stainless steel or black powdercoated option. Learn More
  58. Dash Center Face Plate Panel (VDO-2x 12v-VDO)

    Dash Center Face Plate Panel (VDO-2x 12v-VDO)

    $85.00

    Dash Center Face Plate Panel (2x VDO / Round Gauges & 2x 12V socket) for Land Rover Defender. Learn More
  59. Leather center insert for RAID sports steering wheel, Land Rover Defender

    Leather center insert for RAID sports steering wheel, Land Rover Defender

    $100.00

    Cover with integrated original Land Rover emblem for sports steering wheel RAID, suitable for Land Rover Defender 90/110/130, made of real leather with great feel and a sophisticated decorative stitching, replaces the "horn button", available in different colors. Learn More
  60. Anti-Theft Bonnet Hinges for Land Rover Defender

    Anti-Theft Bonnet Hinges for Land Rover Defender

    $125.00

    Anti-Theft bonnet hinges for the Land Rover Defender (all models, all model years) address the issues of instability on the factory hinges (they tend to have "play" on them), as well as they deter theft. No additional mounting holes needed, simply use the existing holes, and mount with the included security bit that is included. Available in natural stainless steel or black powder coating. Learn More
  61. Adult T-Shirt: Military Green

    Adult T-Shirt: Military Green

    $20.00

    Adult T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Learn More
  62. LHD Lower Dash Switch Plate Panel (3 Carling)

    LHD Lower Dash Switch Plate Panel (3 Carling)

    $45.00

    NAS [North American Spec] or LHD (Left Hand Drive) Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More
  63. Defender & Series II/IIA/III Stainless Steel Vent Hinge Pins

    Defender & Series II/IIA/III Stainless Steel Vent Hinge Pins

    $35.00

    A set of 4 Defender Stainless Steel Vent Hinge Pins, this kit contains (4) total pins/screws with (10) total nuts - 2 extras are included as a bonus. These Vent Hinge Pins will fit all pre-2007 model year Defenders. Will also fit Series II / IIA / III vehicles. Learn More
  64. Ignition Switch Wiring Harness (bypass)

    Ignition Switch Wiring Harness (bypass)

    $125.00

    Delamination of the Ignition Switch #PRC8230 is a common issue. Switching to “push button start” is an easy way to circumvent this ignition switch and avoid potential issues going forward. This can be achieved by wiring in a Carling OFF-ON-MOMENTARY switch in place of the ignition switch. This harness allows the "plug-and-play" changeover to a push-button start on a Land Rover Defender. Learn More
  65. Defender 90/110 Door Hinge Stainless Hardware (Front Doors & Tailgate)

    Defender 90/110 Door Hinge Stainless Hardware (Front Doors & Tailgate)

    $85.00

    Complete set of screws for 2 doors and tailgate - Land Rover Defender 90 / 110. Includes the hardware to do (1) set of front doors & tailgate. Also includes anti-seize paste. Learn More
  66. Isolating Nylon Washer for Defender NAS Roll Cage bolts (*sold individually*)

    Isolating Nylon Washer for Defender NAS Roll Cage bolts (*sold individually*)

    $1.00

    REPLACEMENT ISOLATING NYLON WASHER FOR NAS ROLL CAGE BOLTS. PRICE LISTED IS PER UNIT (i.e. -1- washer). Learn More
  67. Wingtop Vent (standard RIGHT-SIDE ONLY)

    Wingtop Vent (standard RIGHT-SIDE ONLY)

    $95.00

    CNC milled aluminum replacement wingtop vent (RIGHT-SIDE ONLY) Learn More
  68. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Regular Price: $125.00

    Special Price $115.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Green & Gold oval emblem decal #DAG100330 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  69. Lug nut set (23 pieces), galvanized & black passivate plated

    Lug nut set (23 pieces), galvanized & black passivate plated

    $100.00

    Steel lug nut set (23 pieces total), that are galvanized and then black passivate coated for maximum corrosion resistance. Suitable for Land Rover original steel wheels and other steel wheels, will NOT fit alloy wheels/rims. Fits Defender, Series 2A/3, Discovery 1, and Range Rover Classic. Lugs are same fit as Land Rover part# 576103, RRD500010. Learn More
  70. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Black Powdercoated

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Black Powdercoated

    $160.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) of the Mounting Screw Kits, and the Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  71. Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    $115.00

    Conversion kit for all Land Rover Defender 90/110 to model year 2001 with rear station wagon door. Replaces the anchor with a special gas pressure shock with soft-stop function, which keeps the door reliably open. Learn More
  72. Defender Headlight Surrounds (set of 2)

    Defender Headlight Surrounds (set of 2)

    $750.00

    These are replacement headlight bezel finisher/surrounds for a Land Rover Defender, CNC milled from a one-piece 3" thick block of billet aluminum. These are a perfect complement to our SDO Defender Front Grille, and are likewise powdercoated black for a durable finish. Available with three different design options for the area between the marker lights & turn-signal lights - SOLID, VENTED, or POCKET MILLED. The factory headlight surrounds are extremely flimsy plastic, and tend to crack, break, and become brittle over time. Our solid aluminum headlight surrounds are a great upgrade to any Defender, and a durable solution that will last a lifetime. Learn More
  73. Land Rover Defender 90/110/130 Battery Disconnect Switch Kit (battery isolation)

    Land Rover Defender 90/110/130 Battery Disconnect Switch Kit (battery isolation)

    $180.00

    As an essential component of your electrical system, this Battery Disconnect Switch Kit is a high amperage, in-line isolation solution, designed to isolate your vehicle’s battery from the rest of your electrical system. It can by used to disconnect power in emergency situations, while servicing your vehicle or even locked as a mild theft-deterrent. This premium, fully-sealed ‘made-to-go-anywhere’ switch is weather-resistant to IP65 and is able to withstand the harshest of operating conditions. Off-road-ready, these spring-loaded switches are used throughout Europe in military, commercial and agricultural applications for their vibration resistance and high surge tolerances. Learn More
  74. 300Tdi/Td5/Puma Side Air Intake Vent Grille

    300Tdi/Td5/Puma Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 300Tdi / Td5 / Puma Side Air Intake Vent Grille (milled aluminum) Learn More
  75. Demister/Defrost Dash Vent Trim (14.5", set of 2)

    Demister/Defrost Dash Vent Trim (14.5", set of 2)

    $130.00

    CNC milled aluminum replacement defrost dash vent trim (14.5" size, set of 2) - FITS DEFENDER MODEL YEAR 1989+ Learn More
  76. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    $200.00

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  77. Mounting Plate for heater

    Mounting Plate for heater

    $75.00

    Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More
  78. Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Regular Price: $125.00

    Special Price $115.00

    Stainless steel mud flap mounts/brackets for Land Rover Defender 110/130 (all model years), for left and right rear tires (mirror inverted). Supplied as a set of 2, in bare stainless steel, dimensions approx. 17" x 4.75" x 2.5" (440x120x65mm). Learn More
  79. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior, NO DOOR HINGE BOLTS)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior, NO DOOR HINGE BOLTS)

    $183.33

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  80. Youth T-Shirt: Royal Blue

    Youth T-Shirt: Royal Blue

    $15.00

    Youth T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. NOTE: FOR CHILDREN / YOUTH ONLY. Learn More
  81. Adult T-Shirt: Euro-Oval "SDO" Heather Grey (lightweight)

    Adult T-Shirt: Euro-Oval "SDO" Heather Grey (lightweight)

    $20.00

    Adult T-Shirt bearing the "SDO" Euro-Oval style logo (and Series-Defender Outfitters name and website) on the back, with a smaller logo above the breast on the front. Available in various sizes. Lightweight 4.5oz fabric. Learn More
  82. Defender Stainless Steel Spare Tire Carrier for Station Wagon

    Defender Stainless Steel Spare Tire Carrier for Station Wagon

    $1,300.00

    Stainless Steel Spare Tire Carrier for Land Rover Defender Station Wagon (SW) vehicles. Mounts on the rear crossmember and bolts through the door, and relieves the stress of the weight of the spare tire which is known over time to crack the door frame structure. The carrier is mounted on the rear cross member, and a plate is fitted to the existing holes on the rear door, and connects to the unit by means of two stainless steel rod ends with the carrier. Available in two colors, natural stainless steel or black powdercoat. Learn More
  83. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender

    $145.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) Mounting Screw Kits, enough to do a full set of headlights for one vehicle. The Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  84. Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top

    Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top

    Regular Price: $1,400.00

    Special Price $1,300.00

    To remove the spare tire from the interior of the Land Rover Defender Pickup (DCPU) or Soft-Top vehicle, and to keep the classic Defender look, we have adapted our proven spare wheel carrier to fit the pickup configuration. This swing-away tire carrier is opened independently of the tailgate, is rattle-free and completely made of stainless steel. NOTE: this will *not* fit the Defender HiCapacity (Hicap, HCPU) Pickup configuration. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  85. Black Oxide Stainless Steel Nyloc Nut for Defender NAS Roll Cage Bolts (*sold individually*)

    Black Oxide Stainless Steel Nyloc Nut for Defender NAS Roll Cage Bolts (*sold individually*)

    $3.50

    REPLACEMENT NYLON LOCK NUT FOR NAS ROLL CAGE BOLTS. PRICE LISTED IS PER UNIT (i.e. -1- nut). Learn More
  86. CargoBear - Crossbar - for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    CargoBear - Crossbar - for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    $500.00

    If you do not need an entire roof rack on your Land Rover Defender because you only want to mount a roof tent on two cross beams, for example, the CargoBear crossbars are ideal! They are identical to the cross bars of the CargoBear Roof Rack. Learn More
  87. Defender Front Grille

    Defender Front Grille

    $500.00

    This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. PLEASE NOTE: we currently have two versions of the Front Grille - one designed for those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle), and those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle). This unit is designed for those with the in-cabin bonnet pull cable, if you require the other version of the Front Grille please see our other listing. Learn More
  88. "Series-Defender Outfitters" Distressed Mesh Back Hat with oval SDO-logo

    "Series-Defender Outfitters" Distressed Mesh Back Hat with oval SDO-logo

    $20.00

    Hat featuring the "Series-Defender Outfitters" oval logo on the front. This hat is a low-profile, unstructured washed/distressed cotton twill. One size fits all.
    Learn More
  89. Door Pads for Land Rover Defender

    Door Pads for Land Rover Defender

    Regular Price: $110.00

    Special Price $100.00

    Armrest for the door of the Land Rover Defender 90/110/130, covered with elaborate aluminum substructure, with naturally tanned leather (black), either for the right or left side. Learn More
  90. LED Interior Light for Land Rover Defender (Warm White)

    LED Interior Light for Land Rover Defender (Warm White)

    $135.00

    LEDs are not only popular in headlights and signal lamps, but also advantageous in the interior of the vehicle. The LED interior light is a simple "plug and play exchange" for the existing interior lights (front or rear) of the Land Rover Defender SW. Simply remove the original cover and the lamp of the previous factory unit (AMR3155) are removed, install the LED unit, and all previous functions of the interior light (on / off / door opening) are retained. In addition, the lighting can be switched over to a "red light" to preserve night vision (activated via the red push button). If the interior light is switched off, it will accept the last selected light color the next time the lamp is switched on. Learn More
  91. Weld-In Fill Plug for differential/axle housing (includes plug) - Series/Defender/Discovery/RRC

    Weld-In Fill Plug for differential/axle housing (includes plug) - Series/Defender/Discovery/RRC

    $40.00

    This is a weld-in steel fill plug bung for a Defender/Discovery/RRC axle housing, for use in either replacing a factory fill plug hole or for upgrading to "sewer cap" axle covers. Includes (1) machined fill plug 'bung' and also includes (1) fill plug [Land Rover part# 608246]. Learn More
  92. Adult T-Shirt: Desert Sand

    Adult T-Shirt: Desert Sand

    $20.00

    Adult T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Learn More
  93. Adult T-Shirt: Heather Grey (lightweight)

    Adult T-Shirt: Heather Grey (lightweight)

    $20.00

    Adult T-Shirt bearing the Series-Defender Outfitters logo on the back, with a smaller logo above the breast on the front. Available in various sizes. Lightweight 4.5oz fabric. Learn More
  94. Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    $350.00

    Aluminum Steering Guard / Skid Plate and Mounting Brackets, fits ALL model years of the Land Rover Defender from 1983 to present. The units are constructed from 1/4" (6mm) aluminum high-strength alloy, and the side mounting brackets are 1/4" (6mm steel) that are galvanized and then powder coated black. Skid Plate is available in either silver anodized, or an optional black powder coated version. PLEASE NOTE: if you have a 1997 NAS 90 Defender, the mounting brackets will have to be notched slightly in order to clear the transmission cooler lines at the front of the vehicle. Learn More
  95. Defender Footwell Panels [***6-8 WEEK PRODUCTION LEAD-TIME***]

    Defender Footwell Panels [***6-8 WEEK PRODUCTION LEAD-TIME***]

    $100.00

    [THIS ITEM IS CUSTOM MADE TO ORDER BASED ON VEHICLE CONFIGURATION, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 6-8 WEEKS.]. Aluminum panels to replace the missing or worn out stock cardboard units. Panels are made from sturdy .063 aluminum plate that is waterjet cut. Panels are currently available for all NAS and LHD (Left-Hand Drive) models (90's, 110’s, and 130's). RHD (Right-Hand Drive) panels are NOT available yet, but are coming soon. Learn More
  96. Defender Cubby Box Console Base / Security Console

    Defender Cubby Box Console Base / Security Console

    $325.00

    Cubby Box Console Base / Security Console for all Land Rover Defender 90/110/130 (all years), the unit mounts below the factory cubby box / center console, and has a concealed lock to ensure safety & security of the contents. The Console Base will raise the console approximately 5” to provide a better arm rest height while also giving additional discreet storage beneath the cubby. Available with optional Blue Sea 12V and USB sockets, and/or 20amp rocker switches. Learn More
  97. 'Series-Defender Outfitters' wall banner 55"x33"

    'Series-Defender Outfitters' wall banner 55"x33"

    $100.00

    Quality printed vinyl wall banner with hanging grommets, SDO backdrop & verbiage. Learn More
  98. ANR Classic Steel Rim 16" x 8"

    ANR Classic Steel Rim 16" x 8"

    $250.00

    ANR Classic 16" x 8" steel rim, based on the popular original ANR1534 steel wheel that came stock on NAS 110s and Defender 130s, but with an 8" rim width to accommodate larger tires if desired. These ANR rims will fit on various years of Defender 90/110/130s, Series trucks, Discovery 1's, and Range Rover Classics that share the same bolt pattern. Classic in design, versatile in use, strong in performance....the ANR Classic 16x8 refines almost every Defender look. These rims have a zero offset to ensure a discreetly wider track and the selection of suitable tire sizes also guarantees a wide range of options in terms of performance. These are DOT approved & stamped. Learn More
  99. Dash Center Face Plate Panel (6 Carling)

    Dash Center Face Plate Panel (6 Carling)

    $85.00

    Dash Center Face Plate Panel (6 Carling Switches) for Land Rover Defender. Learn More
  100. Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    $130.00

    This unique rubberised extrusion replaces the factory felt lining in Land Rover Defender rear sliding windows and eliminates the irritating glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More

100 Item(s)

per page

List  Grid 

Set Ascending Direction