Custom Land Rover Series & Defender Parts

Search results for 'flex plate'

33 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Dash Center Face Plate Panel (VDO Gauges)

    Dash Center Face Plate Panel (VDO Gauges)

    $85.00

    Dash Center Face Plate Panel (VDO / Round Gauges) for Land Rover Defender. Learn More
  2. Dash Center Face Plate Panel (VDO-2x 12v-VDO)

    Dash Center Face Plate Panel (VDO-2x 12v-VDO)

    $85.00

    Dash Center Face Plate Panel (2x VDO / Round Gauges & 2x 12V socket) for Land Rover Defender. Learn More
  3. Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    $85.00

    Dash Center Face Plate Panel (VDO-3x Carling Switches-VDO) for Land Rover Defender. Learn More
  4. Tailgate Organizer for Land Rover Defender

    Tailgate Organizer for Land Rover Defender

    Regular Price: $225.00

    Special Price $200.00

    Where to put all the little odds and ends in an expedition vehicle? First-aid kid, multimeter, work gloves, winch controls, tire repair kit, etc....all these things have to be put somewhere. Our tailgate organizer makes use of the mostly unused space on the rear door. In several pockets attached with MOLLE attachment system you can store away all these bits and pieces which then are at hand once needed. Learn More
  5. Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    $175.00

    These embossed aluminum signs are the *exact* specifications that were used in the Camel Trophy event on the vehicles racks, and are supplied from the company that manufactured the vehicle plates for the Camel Trophy event originally from 1980-1998. Learn More
  6. CargoBear - Modular Roof Rack System for Mercedes G-Wagen  [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Mercedes G-Wagen [***4-6 WEEK LEAD-TIME***]

    $2,200.00

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powder-coated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.75" (70mm) above the roof height, making them one of the thinnest roof racks on the market. Thanks to the lashing rails, you can flexibly secure a roof load anywhere on the rack. Each section is equipped with three plates of coated diamond plate, which can be used and left installed as the "floor" - but not required (in other words you can leave the plates out of the rack, so just the rails are in place with no floor). Whether you need a full-length carrier for your G-Wagen or just a short platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  7. CargoBear - Modular Roof Rack System for Land Rover LR3 / LR4 [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Land Rover LR3 / LR4 [***4-6 WEEK LEAD-TIME***]

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powdercoated. They are completely separable - and infinitely flexible to configure to your desired needs. With the integrated L-track airline lashing points in the roof rack rails, you can flexibly secure a roof load anywhere on the rack. Whether you need a full-length carrier for your LR3/LR4 or just a short "three-quarter rack" platform, the CargoBear is optimally tuned and adjustable to your requirements. hether you need a full-length carrier for your LR3/LR4 or just a short "three-quarter rack" platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  8. [FACTORY SECONDS WITH FINISH ISSUES] Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    [FACTORY SECONDS WITH FINISH ISSUES] Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    Regular Price: $175.00

    Special Price $75.00

    PLEASE NOTE: THESE ARE BEING OFFERED AS "FACTORY SECONDS" DUE TO SLIGHT MANUFACTURING ISSUES WITH THE FONT COLOR/PAINT. THE ISSUES ARE RELATIVELY MINOR, BUT DO AFFECT THE FINISH OF THE PRODUCT. Learn More
  9. Dash Panel & Interior Lights Wiring Harness (*includes* Carling Switch & Multiplug)

    Dash Panel & Interior Lights Wiring Harness (*includes* Carling Switch & Multiplug)

    $65.00

    Failure of the factory switch that controls the Dash Lamp/Panel Lights & Interior Lights (corresponding to original part #PRC7371, generally used on Defender vehicles through the 1994 model year) is a common issue. Our custom harness combines the reliability of the Carling Switch with an easy way to swap out your old Dash Lamp/Panel Lights & Interior Lights switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a switch that has already failed. We utilize specialty 3.0mm male pin connectors on the end of the harness that specifically mate up directly into the female openings in the Rover plug. Learn More
  10. High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    High Torque Starter - Land Rover Series II/IIA/III, Defender, Stage1, Discovery 1/2, Range Rover Classic, P38

    $225.00

    High Torque Gear Reduction Starter for the Land Rover trucks. This modern starter will amaze you every time you turn the key...no longer will you have to cross your fingers, and hope that your truck will start (either in the driveway, or out on the trail). Learn More
  11. Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

    Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

    Regular Price: $135.00

    Special Price $125.00

    Jeep JL Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JL Unlimited 2018- present, sold in pairs. Learn More
  12. Land Rover Defender Flexible Radio Antenna - AM / FM / DAB / DAB +

    Land Rover Defender Flexible Radio Antenna - AM / FM / DAB / DAB +

    $135.00

    This radio antenna has excellent radio reception and scores with high-quality optics. Since conventional antenna feet are usually a little too large, this custom foot fits perfectly into the original opening in the fender of the Land Rover Defender. The Defender antenna is suitable for all Land Rover Defender 90/110/130 with existing antenna or antenna bore, and the robust antenna is particularly suitable for off-road use and offers extensive reception of AM, FM, DAB, DAB+. Learn More
  13. Aluminum Mirror Arms for Land Rover Defender (with LED & Heated options)

    Aluminum Mirror Arms for Land Rover Defender (with LED & Heated options)

    Regular Price: $650.00

    Special Price $625.00

    These high quality exterior mirror arms for the Land Rover Defender are CNC milled from aluminum and and completed with a black anodized finish. The optional integrated entrance lighting (puddle light) includes three durable LEDs installed into the arms to provide ambient lighting. For the heating film option the package includes the separate Heating Foil for outside mirrors, with wiring already run through the mirror arms ready to hook up. Includes Set of 2 Mirror Arms. Learn More
  14. Rear Door Window Vents - universal, adjustable (set of 2)

    Rear Door Window Vents - universal, adjustable (set of 2)

    Regular Price: $160.00

    Special Price $150.00

    The window vents are not vehicle specific, they can be adjusted with high quality screw caps between 17.7" to 24.6" in width and thus cover a variety of vehicle types. They are ideal for allowing air circulation without compromising security or allowing water to enter. The window vents are made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle. Sold in pairs. Learn More
  15. Rubber antenna with articulated joint

    Rubber antenna with articulated joint

    $50.00

    Rubber antenna with joint...unbreakable, flexible, and made of conductive material. Highly responsive articulated foot joint with 180 ° angle of movement. 15-3/4" (40cm) in length. Learn More
  16. Dash Center Face Plate Panel (VDO-12v-VDO)

    Dash Center Face Plate Panel (VDO-12v-VDO)

    $85.00

    Dash Center Face Plate Panel (2x VDO / Round Gauges & 12V socket) for Land Rover Defender. Learn More
  17. CargoBear Quick-Mounting Tent Frame

    CargoBear Quick-Mounting Tent Frame

    $450.00

    The roof-top quick-change system consists of two stainless steel frames (an upper and lower part). The lower part is powder-coated black and is attached to the vehicle, the top of the frame is mounted on the tent. This system is suitable for all roof racks, and the assembly and disassembly takes place quickly - only four screws have to be removed. Additionally, because of the even geometric nature of the tent frame, the tent can also be easily rotated at a 90 ° angle for changing the opening/access from front of the rack to side (or vice-versa). Learn More
  18. CargoBear - Modular Roof Rack System for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    CargoBear - Modular Roof Rack System for Land Rover Defender [***4-6 WEEK LEAD-TIME***]

    $1,500.00

    [THIS ITEM IS CUSTOM ORDERED BASED ON VEHICLE CONFIGURATION, ESTIMATED LEAD TIME IS APPROX. 4-6 WEEKS.] The CargoBear is a modular roof rack system made from an aluminum-magnesium alloy and then high-quality powder-coated. They are completely separable - and infinitely flexible to configure to your desired needs. The rack is extremely low-profile ,and sits just 2.35" (60mm) above the roof height, making them one of the thinnest roof racks on the market. Thanks to the lashing rails, you can flexibly secure a roof load anywhere on the rack. Each section is equipped with three plates of coated diamond plate, which can be used and left installed as the "floor" - but not required (in other words you can leave the plates out of the rack, so just the rails are in place with no floor). Whether you need a full-length carrier for your 110 Defender or just a short platform, the CargoBear is optimally tuned and adjustable to your requirements. Learn More
  19. Dash Center Face Plate Panel (6 Carling)

    Dash Center Face Plate Panel (6 Carling)

    $85.00

    Dash Center Face Plate Panel (6 Carling Switches) for Land Rover Defender. Learn More
  20. Dash Center Face Plate Panel (12V-Carling-12V)

    Dash Center Face Plate Panel (12V-Carling-12V)

    $85.00

    Dash Center Face Plate Panel (12V-Carling Switches-12V) for Land Rover Defender. Learn More
  21. RHD Lower Dash Switch Plate Panel (3 Carling)

    RHD Lower Dash Switch Plate Panel (3 Carling)

    $45.00

    RHD [Right Hand Drive] Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More
  22. LHD Lower Dash Switch Plate Panel (3 Carling)

    LHD Lower Dash Switch Plate Panel (3 Carling)

    $45.00

    NAS [North American Spec] or LHD (Left Hand Drive) Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More
  23. Garrison Underseat Storage Case SE

    Garrison Underseat Storage Case SE

    $80.00

    Introducing the innovative Land Rover Defender Underseat Storage Case from Garrison Outfitters®. These cases have been custom designed to fit securely under your Land Rover Defender seat bases to pack additional storage into your vehicle cabin. Secured with 3M® Dual Lock fasteners and Velcro® One-Wrap® straps, these cases install in seconds without the need for tools or modification to your vehicle. Learn More
  24. Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    $350.00

    Aluminum Steering Guard / Skid Plate and Mounting Brackets, fits ALL model years of the Land Rover Defender from 1983 to present. The units are constructed from 1/4" (6mm) aluminum high-strength alloy, and the side mounting brackets are 1/4" (6mm steel) that are galvanized and then powder coated black. Skid Plate is available in either silver anodized, or an optional black powder coated version. PLEASE NOTE: if you have a 1997 NAS 90 Defender, the mounting brackets will have to be notched slightly in order to clear the transmission cooler lines at the front of the vehicle. Learn More
  25. Defender Stainless Steel Spare Tire Carrier for Station Wagon

    Defender Stainless Steel Spare Tire Carrier for Station Wagon

    $1,300.00

    Stainless Steel Spare Tire Carrier for Land Rover Defender Station Wagon (SW) vehicles. Mounts on the rear crossmember and bolts through the door, and relieves the stress of the weight of the spare tire which is known over time to crack the door frame structure. The carrier is mounted on the rear cross member, and a plate is fitted to the existing holes on the rear door, and connects to the unit by means of two stainless steel rod ends with the carrier. Available in two colors, natural stainless steel or black powdercoat. Learn More
  26. Lug nut set (23 pieces), galvanized & black passivate plated

    Lug nut set (23 pieces), galvanized & black passivate plated

    $100.00

    Steel lug nut set (23 pieces total), that are galvanized and then black passivate coated for maximum corrosion resistance. Suitable for Land Rover original steel wheels and other steel wheels, will NOT fit alloy wheels/rims. Fits Defender, Series 2A/3, Discovery 1, and Range Rover Classic. Lugs are same fit as Land Rover part# 576103, RRD500010. Learn More
  27. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $275.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  28. Defender Footwell Panels [***3-4 WEEK PRODUCTION LEAD-TIME***]

    Defender Footwell Panels [***3-4 WEEK PRODUCTION LEAD-TIME***]

    $100.00

    [THIS ITEM IS CUSTOM MADE TO ORDER BASED ON VEHICLE CONFIGURATION, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 3-4 WEEKS.]. Aluminum panels to replace the missing or worn out stock cardboard units. Panels are made from sturdy .063 aluminum plate that is waterjet cut. Panels are currently available for all NAS and LHD (Left-Hand Drive) models (90's, 110’s, and 130's). RHD (Right-Hand Drive) panels are NOT available yet, but are coming soon. Learn More
  29. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior ONLY)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior ONLY)

    $175.00

    This exterior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  30. Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

    Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

    $125.00

    Jeep JK Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JK Unlimited 2007-2018, sold in pairs. Learn More
  31. Mounting Plate for heater

    Mounting Plate for heater

    $75.00

    Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More
  32. Hazard Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    Hazard Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    $75.00

    Failure and internal delamination of the of the Land Rover Hazard Switch #AFU4209L (for NAS/North American Spec vehicles), and #YUF101490 (for imported ROW/Rest Of World vehicles) is a common issue. Our harness combines the reliability of the Carling Hazard Switch with an easy way to swap out your old hazard switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a hazard switch that has already failed. This harness uses correctly sized 3mm pin connectors to connect to the factory wiring plug so you do not have to cut or splice the factory wires. INCLUDES your choice of either a black or red Carling Hazard Switch & Multiplug Connector. Learn More
  33. Rear Wash/Wipe Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    Rear Wash/Wipe Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    $80.00

    Upgrading the factory wash/wipe Carling switch, from the clunky factory knob & switch (original part #PRC4454 & PRC4449) is a popular upgrade. Our harness combines the reliability of the Carling Hazard Switch with an easy way to swap out your old hazard switch with our plug-and-play replacement. For imported / Rest of World (ROW) trucks only, will NOT fit North American Spec (NAS) vehicles). Learn More

33 Item(s)

per page

List  Grid 

Set Ascending Direction