Custom Land Rover Series & Defender Parts

Search results for 'grille'

17 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. 300Tdi/Td5/Puma Side Air Intake Vent Grille

    300Tdi/Td5/Puma Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 300Tdi / Td5 / Puma Side Air Intake Vent Grille (milled aluminum) Learn More
  2. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior, NO DOOR HINGE BOLTS)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior, NO DOOR HINGE BOLTS)

    $183.33

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  3. Defender Headlight Surrounds (set of 2)

    Defender Headlight Surrounds (set of 2)

    $750.00

    These are replacement headlight bezel finisher/surrounds for a Land Rover Defender, CNC milled from a one-piece 3" thick block of billet aluminum. These are a perfect complement to our SDO Defender Front Grille, and are likewise powdercoated black for a durable finish. Available with three different design options for the area between the marker lights & turn-signal lights - SOLID, VENTED, or POCKET MILLED. The factory headlight surrounds are extremely flimsy plastic, and tend to crack, break, and become brittle over time. Our solid aluminum headlight surrounds are a great upgrade to any Defender, and a durable solution that will last a lifetime. Learn More
  4. Security Mounting Kit for 90/110 SW Window Grille

    Security Mounting Kit for 90/110 SW Window Grille

    $32.50

    Optional security mounting kit for the Window Grilles for the Land Rover Defender 90/110 Station Wagon. Kit consists of security-head Torx screws, mounting rivnuts, and Torx bit. Please note the price for the kit is per *each* unit/grille, (2) mounting kits required to do both windows for a Station Wagon configuration. Learn More
  5. Window Grille for Land Rover Defender 90/110 Station Wagon

    Window Grille for Land Rover Defender 90/110 Station Wagon

    $200.00

    Window grille, for Land Rover Defender 90/110 Station Wagon (SW), for the rear side windows. Made from anodized aluminum and powdercoated black. Please note price is per side/unit, so (2) will be required to fit a standard Station Wagon configuration. Includes mounting rivets, but please also see our alternative "Security mounting kit" for the window grilles that include security-head Torx screws & mounting rivnuts. Learn More
  6. Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    $275.00

    Stamped 16-guage aluminum sheet (~0.0625" thick), and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 without air conditioning. Learn More
  7. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $275.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  8. Defender 90 SW Stainless Hardware Kit (Exterior)

    Defender 90 SW Stainless Hardware Kit (Exterior)

    $175.00

    This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  9. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    $200.00

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  10. Defender Front Grille (w/ cutout for manual bonnet latch)

    Defender Front Grille (w/ cutout for manual bonnet latch)

    $500.00

    Similar to our "standard" SDO Front Grille....BUT this particular unit is designed for those those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle and allows you to manually open the bonnet), versus those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle). This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. Learn More
  11. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Regular Price: $125.00

    Special Price $100.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Black & Silver oval emblem decal #DAG500140 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  12. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Regular Price: $125.00

    Special Price $100.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Green & Gold oval emblem decal #DAG100330 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  13. "Bloody Knuckles Brotherhood: Member" Round 3-inch Metal Grille Badge

    "Bloody Knuckles Brotherhood: Member" Round 3-inch Metal Grille Badge

    $50.00

    Metal Grille badge with hard enamel cloisonne finish in a 3" diameter size with two 3/16" cut outs for mounting. Learn More
  14. Defender Front Grille

    Defender Front Grille

    $500.00

    This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. PLEASE NOTE: we currently have two versions of the Front Grille - one designed for those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle), and those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle). This unit is designed for those with the in-cabin bonnet pull cable, if you require the other version of the Front Grille please see our other listing. Learn More
  15. "Land Rover 127" decal for upper grille panel (layered silver over black vinyl)

    "Land Rover 127" decal for upper grille panel (layered silver over black vinyl)

    $10.00

    Reproduction decal for the front upper grille panel / surround on a Land Rover 127, made from layered silver over black vinyl. Measures 11-1/4" x 1-3/8". Learn More
  16. 200Tdi / 2.5TD Side Air Intake Vent Grille

    200Tdi / 2.5TD Side Air Intake Vent Grille

    $100.00

    Land Rover Defender 200Tdi / 2.5TD Side Air Intake Vent Grille (milled aluminum) Learn More
  17. Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    $250.00

    Stamped 16-guage aluminum sheet (~0.0625" thick), and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 with air conditioning. Learn More

17 Item(s)

per page

List  Grid 

Set Ascending Direction