Custom Land Rover Series & Defender Parts

Search results for 'rocker switch'

30 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Dash Center Face Plate Panel (NAS standard)

    Dash Center Face Plate Panel (NAS standard)

    $85.00

    NAS 90 Dash Center Face Plate Panel (milled aluminum) for Land Rover Defender. Learn More
  2. Hazard Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    Hazard Switch Wiring Harness (*includes* Carling Hazard Switch & Multiplug)

    $85.00

    Failure and internal delamination of the of the Land Rover Hazard Switch #AFU4209L (for NAS/North American Spec vehicles), and #YUF101490 (for imported ROW/Rest Of World vehicles) is a common issue. Our harness combines the reliability of the Carling Hazard Switch with an easy way to swap out your old hazard switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a hazard switch that has already failed. This harness uses correctly sized 3mm pin connectors to connect to the factory wiring plug so you do not have to cut or splice the factory wires. INCLUDES your choice of either a black or red Carling Hazard Switch & Multiplug Connector. Learn More
  3. Carling Contura II OFF-MOMENTARY Switch

    Carling Contura II OFF-MOMENTARY Switch

    $25.00

    Carling Contura II OFF-MOMENTARY Switch. Momentary switch which can be used as either a fog switch on the later Defender, or simply as a horn function. Learn More
  4. Carling Contura II MOMENTARY-OFF-MOMENTARY Switch

    Carling Contura II MOMENTARY-OFF-MOMENTARY Switch

    $30.00

    Carling Contura II MOMENTARY-OFF-MOMENTARY Switch. Momentary spring loaded 2-way rocker switch. Use the DP switch wiring when using the momentary switch as an electric window control. Use the SP switch wiring when using the momentary switch as a winch control. Learn More
  5.  Blue Sea Systems Dual USB Charger Switch Mount (Carling switch style)

    Blue Sea Systems Dual USB Charger Switch Mount (Carling switch style)

    $60.00

    Blue Sea Systems Dual USB Charger Switch Mount. Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices. Learn More
  6. Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    Dash Center Face Plate Panel (VDO-3x Carling-VDO)

    $85.00

    Dash Center Face Plate Panel (VDO-3x Carling Switches-VDO) for Land Rover Defender. Learn More
  7. LED Interior Light for Land Rover Defender (Warm White)

    LED Interior Light for Land Rover Defender (Warm White)

    $135.00

    LEDs are not only popular in headlights and signal lamps, but also advantageous in the interior of the vehicle. The LED interior light is a simple "plug and play exchange" for the existing interior lights (front or rear) of the Land Rover Defender SW. Simply remove the original cover and the lamp of the previous factory unit (AMR3155) are removed, install the LED unit, and all previous functions of the interior light (on / off / door opening) are retained. In addition, the lighting can be switched over to a "red light" to preserve night vision (activated via the red push button). If the interior light is switched off, it will accept the last selected light color the next time the lamp is switched on. Learn More
  8. Rear Wash/Wipe Switch Wiring Harness (*includes* Carling Switch & Multiplug)

    Rear Wash/Wipe Switch Wiring Harness (*includes* Carling Switch & Multiplug)

    $80.00

    Upgrading the factory wash/wipe Carling switch, from the clunky factory knob & switch (original part #PRC4454 & PRC4449) is a popular upgrade. Our harness combines the reliability of the Carling Wash/Wipe Switch with an easy way to swap out your old switch with our plug-and-play replacement. For imported / Rest of World (ROW) trucks OR North American Spec (NAS) vehicles. Learn More
  9. DIN bay for Land Rover Defender Puma/Td4

    DIN bay for Land Rover Defender Puma/Td4

    $100.00

    DIN bay for mounting under the glove box, for vehicles from model year 2007+ with 2.4l and 2.2l engine, ideal for installation of CB, radio or switches .< Learn More
  10. Soft Shackle 10mm (7/16") - 12,000kg (26,000lb) break strength [recovery, synthetic shackle]

    Soft Shackle 10mm (7/16") - 12,000kg (26,000lb) break strength [recovery, synthetic shackle]

    $40.00

    This soft recovery shackle is made from a synthetic fiber Dyneema, an ultra-high molecular weight polyethylene. With this 10 mm (~7/16") soft shackle, Dyneema ensures a breaking strength of over 12 tons (26,000 lbs). Available in gray and orange. Learn More
  11. Soft Shackle 10mm (7/16") - 12,000kg (26,000lb) break strength [recovery, synthetic shackle]-Orange

    Soft Shackle 10mm (7/16") - 12,000kg (26,000lb) break strength [recovery, synthetic shackle]-Orange

    $40.00

    This soft recovery shackle is made from a synthetic fiber Dyneema, an ultra-high molecular weight polyethylene. With this 10 mm (~7/16") soft shackle, Dyneema ensures a breaking strength of over 12 tons (26,000 lbs). Available in gray and orange. Learn More
  12. Soft Shackle 10mm (7/16") - 12,000kg (26,000lb) break strength [recovery, synthetic shackle]-Gray

    Soft Shackle 10mm (7/16") - 12,000kg (26,000lb) break strength [recovery, synthetic shackle]-Gray

    $40.00

    This soft recovery shackle is made from a synthetic fiber Dyneema, an ultra-high molecular weight polyethylene. With this 10 mm (~7/16") soft shackle, Dyneema ensures a breaking strength of over 12 tons (26,000 lbs). Available in gray and orange. Learn More
  13. Rear Defrost Switch Wiring Harness (*includes* Carling Switch & Multiplug)

    Rear Defrost Switch Wiring Harness (*includes* Carling Switch & Multiplug)

    $45.00

    Upgrade your Rear Defrost Switch to a Carling using our custom harness combines the reliability of the Carling Switch with an easy way to swap out your old Defrost switch with our plug-and-play replacement to proactively avoid potential issues going forward, or correct/replace a switch that has already failed. We utilize specialty 3.0mm male pin connectors on the end of the harness that specifically mate up directly into the female openings in the Rover plug. This harness is a neat and tidy way to changeover to a Carling Switch, and comes with a color-coded set of instructions/legend for each wire; in addition the end of each wire is clearly labeled, and also includes a visual diagram to also show you where to plug each connector. Learn More
  14. Dash Center Face Plate Panel (NAS configuration w/ VDO clock cutout)

    Dash Center Face Plate Panel (NAS configuration w/ VDO clock cutout)

    $85.00

    Dash Center Face Plate Panel (NAS configuration w/ VDO clock) for Land Rover Defender. Learn More
  15. Defender Cubby Box Console Base / Security Console

    Defender Cubby Box Console Base / Security Console

    $350.00

    Cubby Box Console Base / Security Console for all Land Rover Defender 90/110/130 (all years), the unit mounts below the factory cubby box / center console, and has a concealed lock to ensure safety & security of the contents. The Console Base will raise the console approximately 5” to provide a better arm rest height while also giving additional discreet storage beneath the cubby. Available with optional Blue Sea 12V and USB sockets, and/or 20amp rocker switches. Learn More
  16. Ignition Switch Wiring Harness (bypass)

    Ignition Switch Wiring Harness (bypass)

    $125.00

    Delamination of the Ignition Switch #PRC8230 is a common issue. Switching to “push button start” is an easy way to circumvent this ignition switch and avoid potential issues going forward. This can be achieved by wiring in a Carling OFF-ON-MOMENTARY switch in place of the ignition switch. This harness allows the "plug-and-play" changeover to a push-button start on a Land Rover Defender. Learn More
  17. Dash Center Face Plate Panel (NAS Carling)

    Dash Center Face Plate Panel (NAS Carling)

    $85.00

    NAS 90 Dash Center Face Plate Panel (CARLING HAZARD CONFIGURATION) for Land Rover Defender. Learn More
  18. Dash Center Face Plate Panel (6 Carling)

    Dash Center Face Plate Panel (6 Carling)

    $85.00

    Dash Center Face Plate Panel (6 Carling Switches) for Land Rover Defender. Learn More
  19. RHD Lower Dash Switch Plate Panel (3 Carling)

    RHD Lower Dash Switch Plate Panel (3 Carling)

    $45.00

    RHD [Right Hand Drive] Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More
  20. LHD Lower Dash Switch Plate Panel (3 Carling)

    LHD Lower Dash Switch Plate Panel (3 Carling)

    $45.00

    NAS [North American Spec] or LHD (Left Hand Drive) Lower Dash Switch Plate Panel (3 Carling Switches) for Land Rover Defender. Learn More
  21. Carling Contura II Hazard Switch

    Carling Contura II Hazard Switch

    $32.50

    Carling Contura II Hazard Switch for Land Rover Defender. Learn More
  22. Carling Contura II OFF-ON Switch

    Carling Contura II OFF-ON Switch

    $19.50

    Carling Contura II OFF-ON Switch. One-way switch to simply switch on and off (i.e. spot lights or similar). Learn More
  23. Carling Switch Blank

    Carling Switch Blank

    $4.50

    Carling Contura II Accessories / Switch Blank. Learn More
  24. Carling Contura II ON-OFF-ON Switch

    Carling Contura II ON-OFF-ON Switch

    $30.00

    Carling Contura II ON-OFF-ON Switch. This alternative three position switch allows you to wire two auxiliary circuits through the one switch. This switch operates where circuits one or two are activated completely independently from one another. This switch will replace the standard switch supplied with the popular Exmoor Trim/Waeco heated seat kits. Learn More
  25. Carling Contura II REAR WASH-WIPE Switch

    Carling Contura II REAR WASH-WIPE Switch

    $32.50

    Carling Contura II REAR WASH-WIPE Switch. Learn More
  26. Carling Multiplug (for Hazard Switch)

    Carling Multiplug (for Hazard Switch)

    $5.00

    Carling Multiplug (for Hazard Switch). Learn More
  27. Carling Multiplug

    Carling Multiplug

    $4.00

    Carling Multiplug. Learn More
  28. Carling Switch Terminals (pack of 10)

    Carling Switch Terminals (pack of 10)

    $3.00

    Carling Switch Terminals. A package of 10 non-insulated female crimp terminals for use with the Carling multi-plug connectors. 6.3mm spade is latched for securing into the multi-plug connectors. Learn More
  29. Carling Switch Legend Decals (black/clear, white/clear, or clear/black)

    Carling Switch Legend Decals (black/clear, white/clear, or clear/black)

    $17.50

    Carling Switch Legends. Contains 84 individual switch legends for fixing to the switch rocker windows on the popular Carling Technologies Contura II range of switches. Switch Legends are supplied on a peel-off sheet. Available in black-on-clear, white-on-clear, or clear-on-black backgrounds. Learn More
  30. Defender Console - Upper Dash Mount (Radio Housing)

    Defender Console - Upper Dash Mount (Radio Housing)

    $75.00

    Recreated from the original Defender radio console/tray for those Land Rover owners looking to retain a classic factory-fitted appearance to their radio installation, install auxiliary gauges, switches, CB, or similar. Learn More

30 Item(s)

per page

List  Grid 

Set Ascending Direction