Custom Land Rover Series & Defender Parts

Search results for 'stainless steel'

56 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    Heritage Style Front Grille - aluminum, vehicle with air conditioning (black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    $250.00

    Stamped 16-guage aluminum sheet (~0.0625" thick), and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 with air conditioning. Learn More
  2. Defender 90/110 Door Hinge Stainless Hardware (Front Doors & Tailgate)

    Defender 90/110 Door Hinge Stainless Hardware (Front Doors & Tailgate)

    $85.00

    Complete set of screws for 2 doors and tailgate - Land Rover Defender 90 / 110. Includes the hardware to do (1) set of front doors & tailgate. Also includes anti-seize paste. Learn More
  3. Tailgate Organizer for Land Rover Defender

    Tailgate Organizer for Land Rover Defender

    Regular Price: $225.00

    Special Price $200.00

    Where to put all the little odds and ends in an expedition vehicle? First-aid kid, multimeter, work gloves, winch controls, tire repair kit, etc....all these things have to be put somewhere. Our tailgate organizer makes use of the mostly unused space on the rear door. In several pockets attached with MOLLE attachment system you can store away all these bits and pieces which then are at hand once needed. Learn More
  4. Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Stainless Steel Mud Flap Mounts/Brackets for Land Rover Defender 110/130

    Regular Price: $125.00

    Special Price $115.00

    Stainless steel mud flap mounts/brackets for Land Rover Defender 110/130 (all model years), for left and right rear tires (mirror inverted). Supplied as a set of 2, in bare stainless steel, dimensions approx. 17" x 4.75" x 2.5" (440x120x65mm). Learn More
  5. CargoBear Bracket for 'Connector Bar' or smaller worklights (EACH BRACKET SOLD INDIVIDUALLY)

    CargoBear Bracket for 'Connector Bar' or smaller worklights (EACH BRACKET SOLD INDIVIDUALLY)

    $20.00

    Brackets for the CargoBear Connector Bar (2 required for each Connector Bar), or to be used for additional smaller worklights / auxiliary lights. Each Bracket sold separately. Made from stainless steel and powdercoated black. Learn More
  6. Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    Heritage Style Front Grille - aluminum, vehicle without air conditioning (black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    $275.00

    Stamped 16-guage aluminum sheet (~0.0625" thick), and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130 without air conditioning. Learn More
  7. High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    $4.00

    This replacement bolt corresponds to the original Land Rover part number ALR5549, and these are stainless steel replacements used to attach a NAS roll cage to a Defender. Please note that this replacement hardware is a HIGH TENSILE STAINLESS STEEL in Grade A2-80 providing a minimum tensile strength of approximately 115,000 psi. Available in bare stainless or black oxide finish. Price per piece, optional add-on replacement nyloc nut & isolating washers also available. Learn More
  8. CargoBear CB Antenna Bracket

    CargoBear CB Antenna Bracket

    $25.00

    The CargoBear CB Antenna bracket allows the installation of any exterior antenna. The bracket is made of stainless steel and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per bracket (1), and does not include antenna. Learn More
  9. CargoBear Auxiliary / Worklight Bracket (EACH BRACKET SOLD INDIVIDUALLY)

    CargoBear Auxiliary / Worklight Bracket (EACH BRACKET SOLD INDIVIDUALLY)

    $40.00

    The CargoBear auxiliary / worklight bracket allows the installation of additional lights, such as fog lights, flood or spot lights, rear worklights, etc. The worklight brackets are made of stainless steel and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per bracket (1), and does not include lights. Learn More
  10. Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    $115.00

    Conversion kit for all Land Rover Defender 90/110 to model year 2001 with rear station wagon door. Replaces the anchor with a special gas pressure shock with soft-stop function, which keeps the door reliably open. Learn More
  11. Lashing rail fitting, double stud

    Lashing rail fitting, double stud

    $7.00

    Double Stud Fitting for Airline Cargo lashing rails, load capacity 2425lbs (1100kg), ring diameter 1.57" (40mm). Units are manufactured to ISO 9788 specs, made from galvanized steel and are UV and salt water resistant. For use with the CargoBear Roof Rack system. Learn More
  12. CargoBear Awning Holder Bracket Set (4 PIECE SET)

    CargoBear Awning Holder Bracket Set (4 PIECE SET)

    $100.00

    The CargoBear awning holder allows the installation of numerous awnings or awnings on the CargoBear Roof Rack. At least two (2) CargoBear *Crossbars* are required for assembly. The 4-piece set is delivered including the required mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included. Learn More
  13. CargoBear Quick-Mounting Tent Frame

    CargoBear Quick-Mounting Tent Frame

    $450.00

    The roof-top quick-change system consists of two stainless steel frames (an upper and lower part). The lower part is powder-coated black and is attached to the vehicle, the top of the frame is mounted on the tent. This system is suitable for all roof racks, and the assembly and disassembly takes place quickly - only four screws have to be removed. Additionally, because of the even geometric nature of the tent frame, the tent can also be easily rotated at a 90 ° angle for changing the opening/access from front of the rack to side (or vice-versa). Learn More
  14. Heritage Style Headlight Surrounds, aluminum with inlet gills (pair, black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    Heritage Style Headlight Surrounds, aluminum with inlet gills (pair, black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    $350.00

    Stamped 16-guage aluminum sheet made from aluminum, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130. Learn More
  15. Heritage Style Headlight Surrounds, aluminum with inlet squares (pair, black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    Heritage Style Headlight Surrounds, aluminum with inlet squares (pair, black or silver powdercoat) [***4-6 WEEK LEAD-TIME***]

    $350.00

    Stamped 16-guage aluminum sheet made from aluminum, and available in either black or silver powdercoated finish. Comes with stainless steel mounting hardware, and fits any model year Land Rover 90 110 / 130. Learn More
  16. Leather center insert for MOMO sports steering wheel, Land Rover Defender

    Leather center insert for MOMO sports steering wheel, Land Rover Defender

    $100.00

    Cover with integrated original Land Rover emblem for the MOMO steering wheel, suitable for Land Rover Defender 90/110/130. Made of real leather with great feel and a sophisticated decorative stitching, replaces the "horn button", available in different colors. Learn More
  17. Lightweight Shovel with D-handle

    Lightweight Shovel with D-handle

    $50.00

    The shovel with D-grip is ideal for snow, sand and earthy soil. Its compact dimensions and low weight make it an easy-to-stow away companion in any vehicle; the steel blade is robust and the ergonomic D-grip optimally introduces better leverage. Available with optional add-on QuickFist brackets for mounting. Learn More
  18. TW200 Quick Release Seat Bolts (Set of 2)

    TW200 Quick Release Seat Bolts (Set of 2)

    $40.00

    Custom extended seat bolts compatible with the 1987-2019 Yamaha TW200. The factory recessed bolts are difficult to access, and also make any "field repairs" to the battery or getting under the seat very difficult. Our custom seat bolt solution features a knurled end for ease of threading the bolts in-or-out by hand, and also have a 6-point wrench knockout that fits a standard 10mm wrench to tighten/loosen. We've also made the knockout area large enough to accept an adjustable wrench, or pliers in a pinch for tightening or loosening the seat bolts. Turned on a CNC lathe from a solid piece of 304 annealed stainless steel, they are guaranteed not to rust or corrode. Price is for a SET OF 2. Learn More
  19. Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)

    Defender 90 SW (NAS) Door Hinge Stainless Hardware (Front & Rear Doors)

    $125.00

    Stainless Steel screw set to do the Door Hinges ONLY for a Land Rover Defender 90 NAS (North American Spec) Station Wagon (SW) vehicle. Includes the factory correct reproduction hardware to do (1) set of front doors and the rear SW door only. Also includes anti-seize paste. Learn More
  20. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior, NO DOOR HINGE BOLTS)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior, NO DOOR HINGE BOLTS)

    $183.33

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  21. LR3/LR4 Stainless Steel Spare Tire Carrier [***6-8 WEEK LEAD-TIME***]

    LR3/LR4 Stainless Steel Spare Tire Carrier [***6-8 WEEK LEAD-TIME***]

    Regular Price: $2,200.00

    Special Price $2,050.00

    This custom Spare Tire Carrier removes the spare tire from the underneath of the Land Rover LR3/LR4, allows for the fitment of larger than stock size spare tire, and to makes it more readily accessible as well as protects it from dirt/stones/etc. This swing-away tire carrier is rattle-free and completely made of stainless steel, and allows installation of the wheel on the rear of the vehicle. The tire carrier is bolted directly to the rear crossbeam of the vehicle for a secure fit, and please note that holes must be drilled in the original bumper for fitment of this tire carrier. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  22. Rear Load Bay Sill for Land Rover Defender (stainless steel)

    Rear Load Bay Sill for Land Rover Defender (stainless steel)

    $50.00

    Rear Load Bay Sill in stainless steel, replaces the original rear load bay sill which is prone to rust. Fitting holes identical to original sill for ease of fitting, and is supplied with stainless steel mounting hardware. Learn More
  23. Weld-In Fill Plug for differential/axle housing (includes plug) - Series/Defender/Discovery/RRC

    Weld-In Fill Plug for differential/axle housing (includes plug) - Series/Defender/Discovery/RRC

    $40.00

    This is a weld-in steel fill plug bung for a Defender/Discovery/RRC axle housing, for use in either replacing a factory fill plug hole or for upgrading to "sewer cap" axle covers. Includes (1) machined fill plug 'bung' and also includes (1) fill plug [Land Rover part# 608246]. Learn More
  24. Side storage locker/box for Land Rover Defender 110 (stainless steel & black powdercoated - fits back left of vehicle)

    Side storage locker/box for Land Rover Defender 110 (stainless steel & black powdercoated - fits back left of vehicle)

    $650.00

    Our storage locker offers a significant increase in storage space - which is also accessible from the outside. Ideal for storing spare parts, tools, boots, etc. The box itself is made entirely of stainless steel, waterproof and lockable. The side storage compartment is mounted on the Land Rover Defender 110 4- and 2-door in the rear left fender or the 2-door in the sides (fits 1992 and later vehicles....sorry, will not fit a Defender 90). Learn More
  25. Leather center insert for RAID sports steering wheel, Land Rover Defender

    Leather center insert for RAID sports steering wheel, Land Rover Defender

    $100.00

    Cover with integrated original Land Rover emblem for sports steering wheel RAID, suitable for Land Rover Defender 90/110/130, made of real leather with great feel and a sophisticated decorative stitching, replaces the "horn button", available in different colors. Learn More
  26. Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)

    Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)

    $175.00

    Conversion kit for all Land Rover Defender 90/110 all model years with rear station wagon door. This conversion kit is for mounting on the TOP on the rear door, and includes stainless steel mounting hardware. This replaces the bottom checkstrap with a TOP mount Gas Strut, with a soft-stop function that keeps the door reliably open. Damper functions properly even with our spare tire carrier mounted to the rear crossmember. Learn More
  27. Black Oxide Stainless Steel Nyloc Nut for Defender NAS Roll Cage Bolts (*sold individually*)

    Black Oxide Stainless Steel Nyloc Nut for Defender NAS Roll Cage Bolts (*sold individually*)

    $3.50

    REPLACEMENT NYLON LOCK NUT FOR NAS ROLL CAGE BOLTS. PRICE LISTED IS PER UNIT (i.e. -1- nut). Learn More
  28. Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top

    Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top

    Regular Price: $1,400.00

    Special Price $1,300.00

    To remove the spare tire from the interior of the Land Rover Defender Pickup (DCPU) or Soft-Top vehicle, and to keep the classic Defender look, we have adapted our proven spare wheel carrier to fit the pickup configuration. This swing-away tire carrier is opened independently of the tailgate, is rattle-free and completely made of stainless steel. NOTE: this will *not* fit the Defender HiCapacity (Hicap, HCPU) Pickup configuration. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  29. Spacers for rear axle sway bar, for Defender 90/110/130

    Spacers for rear axle sway bar, for Defender 90/110/130

    $85.00

    The spacers prevent folding of the rear stabilizer sway bar for higher/lifted vehicles. Fits all model years Land Rover Defender 90/110/130 (*except* 1994/95/97 NAS 90). Spacers made from stainless steel, and includes required mounting hardware. Learn More
  30. Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    Defender Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard

    Regular Price: $175.00

    Special Price $150.00

    Galvanized Steel Heavy Duty Tie Rod / Track Rod Guard, fits ALL model years of the Land Rover Defender from ~1986 to present. The units are constructed from 4mm steel with a galvanized finish to protect it from corrosion, and also includes the mounting hardware. The track rod guard encloses the exposed rod and protects it from damage in rough terrain or off-road situations. Learn More
  31. Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    Defender Aluminum Steering Guard / Skid Plate and Mounting Brackets

    $350.00

    Aluminum Steering Guard / Skid Plate and Mounting Brackets, fits ALL model years of the Land Rover Defender from 1983 to present. The units are constructed from 1/4" (6mm) aluminum high-strength alloy, and the side mounting brackets are 1/4" (6mm steel) that are galvanized and then powder coated black. Skid Plate is available in either silver anodized, or an optional black powder coated version. PLEASE NOTE: if you have a 1997 NAS 90 Defender, the mounting brackets will have to be notched slightly in order to clear the transmission cooler lines at the front of the vehicle. Learn More
  32. Defender & Series II/IIA/III Stainless Steel Vent Hinge Pins

    Defender & Series II/IIA/III Stainless Steel Vent Hinge Pins

    $35.00

    A set of 4 Defender Stainless Steel Vent Hinge Pins, this kit contains (4) total pins/screws with (10) total nuts - 2 extras are included as a bonus. These Vent Hinge Pins will fit all pre-2007 model year Defenders. Will also fit Series II / IIA / III vehicles. Learn More
  33. Defender 90 SW Stainless Hardware Kit (Exterior)

    Defender 90 SW Stainless Hardware Kit (Exterior)

    $175.00

    This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  34. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    $200.00

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  35. Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    $130.00

    This proprietary rubberized window channel replaces the inferior factory felt lining in Land Rover Defender removable door tops and eliminates the famous glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  36. Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    $130.00

    This unique rubberised extrusion replaces the factory felt lining in Land Rover Defender rear sliding windows and eliminates the irritating glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  37. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" black & silver emblem)

    Regular Price: $125.00

    Special Price $100.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Black & Silver oval emblem decal #DAG500140 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  38. Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Aluminum Grille Badge Mount (Bolt-On with "Land Rover" green & gold emblem)

    Regular Price: $125.00

    Special Price $100.00

    Solid aluminum Badge Mount designed to bolt directly onto our Aluminum Defender Front Grille, and features the genuine Land Rover Green & Gold oval emblem decal #DAG100330 inset directly onto the badge mount. Crafted from solid billet aluminum and powdercoated black, comes with stainless-steel mounting hardware for an easy and quick install. Measures approximately 3-1/2" wide x 1-13/16 tall x 1" deep. Learn More
  39. Dorman Clutch Master Cylinder Conversion Kit

    Dorman Clutch Master Cylinder Conversion Kit

    $175.00

    We have modified a cast-iron Dorman master cylinder that is much more robust than the factory master cylinder, and significantly less prone to the inner wall wearing. This replaces the original Land Rover Clutch Master Cylinder, and our direct drop-in replacement kit includes the modified Dorman Clutch Master Cylinder, new pushrod with stainless hardware, and a braided stainless steel line to replace the factory "hard line" running from the master cylinder to the junction/union located on the bulkhead wall. Fit's late-IIA & III Series (1971-1984) and pre-Puma Defender (1983-2006). Learn More
  40. DPx HEST/F 2.0 Folding Knife (Triple Black)-Left-Handed

    DPx HEST/F 2.0 Folding Knife (Triple Black)-Left-Handed

    Regular Price: $250.00

    Special Price $200.00

    The HEST/F Triple Black is an extremely low-profile knife designed for law enforcement and military use where a superior cutting edge and low visual signature are priorities. The 3.14" German Niolox corrosion resistant blade is matte black TiCN PVD coated to increase hardness and concealability. One side of the frame is scaled in grip textured black American G10 polymer. The other slab is 6Al4V titanium alloy that is black TiCN PVD coated. Like the other DPx HEST/F models, the Triple Black comes with the patented RotoBlock® to lock the folder open. Three sizes of wire strippers serve as unique and slip-proof jimping. A removable glass breaker screws into the butt of the knife, and the hex driver in the handle may be used with the knife open or closed.
    Available in Right-Handed or Left-Handed (LH may be a special order, please contact us for more information if you do not see that option available). Learn More
  41. DPx HEST/F 2.0 Folding Knife (Triple Black)-Right-Handed

    DPx HEST/F 2.0 Folding Knife (Triple Black)-Right-Handed

    Regular Price: $250.00

    Special Price $200.00

    The HEST/F Triple Black is an extremely low-profile knife designed for law enforcement and military use where a superior cutting edge and low visual signature are priorities. The 3.14" German Niolox corrosion resistant blade is matte black TiCN PVD coated to increase hardness and concealability. One side of the frame is scaled in grip textured black American G10 polymer. The other slab is 6Al4V titanium alloy that is black TiCN PVD coated. Like the other DPx HEST/F models, the Triple Black comes with the patented RotoBlock® to lock the folder open. Three sizes of wire strippers serve as unique and slip-proof jimping. A removable glass breaker screws into the butt of the knife, and the hex driver in the handle may be used with the knife open or closed.
    Available in Right-Handed or Left-Handed (LH may be a special order, please contact us for more information if you do not see that option available). Learn More
  42. Defender Stainless Steel Spare Tire Carrier for Station Wagon

    Defender Stainless Steel Spare Tire Carrier for Station Wagon

    $1,300.00

    Stainless Steel Spare Tire Carrier for Land Rover Defender Station Wagon (SW) vehicles. Mounts on the rear crossmember and bolts through the door, and relieves the stress of the weight of the spare tire which is known over time to crack the door frame structure. The carrier is mounted on the rear cross member, and a plate is fitted to the existing holes on the rear door, and connects to the unit by means of two stainless steel rod ends with the carrier. Available in two colors, natural stainless steel or black powdercoat. Learn More
  43. Rear / 2nd Row Door Opening Angle Kit for Land Rover Defender 110 / 130

    Rear / 2nd Row Door Opening Angle Kit for Land Rover Defender 110 / 130

    $135.00

    This stainless steel door opening angle kit allows you to open the rear / second row doors on a Defender 110 or 130 Crew Cab to a maximum angle of 95°. This provided more convenient ingress and egress for passengers, but also more room to access and load gear in and out of the rear doors (coolers, fridges, storage cases, etc). Easy installation with no drilling required, as it bolts to the original mounting points. Fits all model years of the Land Rover Defender 1983-present. Learn More
  44. Seat Risers / Rail Extensions (stainless steel, powdercoated black)

    Seat Risers / Rail Extensions (stainless steel, powdercoated black)

    $100.00

    Seat risers / rail extensions that raise the seat approximately 2" (50mm), suitable for Land Rover Defender 90/110/130 (all model years 1985-2015, except for ex-MOD/military vehicles). Made of stainless steel, black powder coated, and price is for a set to do (1) single seat - includes fastening hardware. Learn More
  45. Mounting Plate for heater

    Mounting Plate for heater

    $75.00

    Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More
  46. PREMIUM Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    PREMIUM Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $50.00

    Leather door pulls for the interior with stainless steel covers on the ends, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  47. Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $40.00

    Leather door pulls for the interior, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  48. Defender Military Snow Cowl Cover - Stainless Steel

    Defender Military Snow Cowl Cover - Stainless Steel

    $225.00

    Stainless Steel Military Snow Cowl Cover for the air intake, for Land Rover Defender 90/110/130 (all versions). Includes seal and mounting hardware. Available in natural/bare stainless steel or black powdercoated option. Learn More
  49. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Black Powdercoated

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Black Powdercoated

    $160.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) of the Mounting Screw Kits, and the Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  50. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Natural/Bare Stainless Steel (no additional charge)

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender-Natural/Bare Stainless Steel (no additional charge)

    $145.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) of the Mounting Screw Kits, and the Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  51. Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender

    Stainless Steel 7" Headlight Rings & Mounting Screw Kit for Land Rover Defender

    $145.00

    Stainless Steel 7" Headlight Mounting Rings & Stainless Steel Mounting Screw Kit for Land Rover Defender. Suitable for halogen, clear glass, and LED headlights (such as Hella, JWSpeaker, BMAC, Nolden, Vision-X, Truck-Lite, Wipac or Sirius). Price is for a pair (2) of the Mounting Rings and (2) Mounting Screw Kits, enough to do a full set of headlights for one vehicle. The Headlight Rings are available in either a natural/bare stainless steel or black powdercoated option. Learn More
  52. Defender 90/110 INTERIOR Stainless Hardware Kit

    Defender 90/110 INTERIOR Stainless Hardware Kit

    $125.00

    This is an INTERIOR ONLY stainless steel bolt/screw hardware kit to fit a Land Rover Defender 90/110, and contains approximately 360 pieces. All bolt packages are clearly labeled and packaged for ease of installation (16 separate packages). The kit includes stainless hardware for: Lower Dash, Instrument Panel, Heater Controls & Center Dash, Dash & Visors, Demister/Defrost Vents, Windshield Pillars, Driver Side End Cap, Tray Trim, Door Panels (ST), Check Strap & Cover, Kick Panel Trim., Floor Pans, Door Sills, Rear Fender Brackets, Seat Rail Bolts, Rear Door Trim (if applicable). Learn More
  53. NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    $500.00

    [THIS ITEM IS CUSTOM MADE TO ORDER, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 3-6 WEEKS]. These crossbars run from the front side rollbars on a NAS (North American Spec) Defender and allow roof racks, baskets, and similar to be mounted safely to the top of your vehicle (note: rack and/or basket NOT included). These units are constructed from 1-1/2" steel tubing, and utilize custom fabrication collar clamps and mounts to secure them in place. Available in two finishes - painted black or powdercoated black (add +2 week to lead-time for powdercoating). Note: our painted *AND* powdercoated versions have a very slight texture to it, which helps to resist marring when mounting baskets/etc on and off from the bars. Learn More
  54. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $275.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  55. Lug nut set (23 pieces), galvanized & black passivate plated

    Lug nut set (23 pieces), galvanized & black passivate plated

    $100.00

    Steel lug nut set (23 pieces total), that are galvanized and then black passivate coated for maximum corrosion resistance. Suitable for Land Rover original steel wheels and other steel wheels, will NOT fit alloy wheels/rims. Fits Defender, Series 2A/3, Discovery 1, and Range Rover Classic. Lugs are same fit as Land Rover part# 576103, RRD500010. Learn More
  56. Winch Hawse Fairlead (10" w/ bottle opener)

    Winch Hawse Fairlead (10" w/ bottle opener)

    $125.00

    CNC milled aluminum winch hawse fairlead (10" mounting holes, 1.5" thick) with built-in bottle opener on the bottom. Type III hard anodized black & includes mounting hardware. Learn More

56 Item(s)

per page

List  Grid 

Set Ascending Direction