Custom Land Rover Series & Defender Parts

Search results for 'top vents'

48 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Rear Door Window Vents - universal, adjustable (set of 2)

    Rear Door Window Vents - universal, adjustable (set of 2)

    Regular Price: $160.00

    Special Price $150.00

    The window vents are not vehicle specific, they can be adjusted with high quality screw caps between 17.7" to 24.6" in width and thus cover a variety of vehicle types. They are ideal for allowing air circulation without compromising security or allowing water to enter. The window vents are made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle. Sold in pairs. Learn More
  2. Carling Contura II OFF-MOMENTARY Switch

    Carling Contura II OFF-MOMENTARY Switch

    $25.00

    Carling Contura II OFF-MOMENTARY Switch. Momentary switch which can be used as either a fog switch on the later Defender, or simply as a horn function. Learn More
  3. CargoBear Quick-Mounting Tent Frame

    CargoBear Quick-Mounting Tent Frame

    $450.00

    The roof-top quick-change system consists of two stainless steel frames (an upper and lower part). The lower part is powder-coated black and is attached to the vehicle, the top of the frame is mounted on the tent. This system is suitable for all roof racks, and the assembly and disassembly takes place quickly - only four screws have to be removed. Additionally, because of the even geometric nature of the tent frame, the tent can also be easily rotated at a 90 ° angle for changing the opening/access from front of the rack to side (or vice-versa). Learn More
  4. Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top

    Defender Stainless Steel Spare Tire Carrier for Pickup / Soft-Top

    Regular Price: $1,400.00

    Special Price $1,300.00

    To remove the spare tire from the interior of the Land Rover Defender Pickup (DCPU) or Soft-Top vehicle, and to keep the classic Defender look, we have adapted our proven spare wheel carrier to fit the pickup configuration. This swing-away tire carrier is opened independently of the tailgate, is rattle-free and completely made of stainless steel. NOTE: this will *not* fit the Defender HiCapacity (Hicap, HCPU) Pickup configuration. Available in two finish options, natural stainless steel or black powdercoat. Learn More
  5. Mounting Plate for heater

    Mounting Plate for heater

    $75.00

    Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More
  6. Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

    Rear Window Vents - Jeep Wrangler JK Unlimited 2007-2018 (set of 2)

    $125.00

    Jeep JK Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JK Unlimited 2007-2018, sold in pairs. Learn More
  7. LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

    LR3 LR4 (Discovery 1 & 2) 2nd Row Doors Window Vents (set of 2)

    $125.00

    LR3 / LR4 / Discovery 1 & 2: 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  8. PREMIUM Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    PREMIUM Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $50.00

    Leather door pulls for the interior with stainless steel covers on the ends, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  9. Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender

    $40.00

    Leather door pulls for the interior, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More
  10. Audi MMI Gear (aluminum replacement) [***3-4 WEEK PRODUCTION LEAD-TIME***]

    Audi MMI Gear (aluminum replacement) [***3-4 WEEK PRODUCTION LEAD-TIME***]

    $60.00

    Aluminum replacement for the MMI gear for an Audi A8 D3 (2004-2010) and Audi S8 (2006-2010). The original gear was made from plastic, and is extremely prone to breaking teeth which prevents the MMI screen from operating correctly. Learn More
  11. Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    Defender (Series) Aluminum Rear Ladder for Station Wagon 90/110

    $160.00

    Aluminum Rear Ladder for Land Rover Defender 90 & 110 Station Wagon (SW) vehicleswill also fit Series hardtop vehicles as well. Allows easy access to the roof rack, and is made from high quality aluminum and TIG welded for strength. The ladder is mounted to the rain gutter at the top utilizing the provided hardware, and does require (2) mounting holes to be drilled into the hard top. Unit weighs just under 4lbs, and is available in two colors either anodized silver or black powdercoat. Also available with *optional* rear step that bolts directly to the rear crossmember. Learn More
  12. Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    Defender Rear Station Wagon Door Gas Strut (up to MY2001)

    $115.00

    Conversion kit for all Land Rover Defender 90/110 to model year 2001 with rear station wagon door. Replaces the anchor with a special gas pressure shock with soft-stop function, which keeps the door reliably open. Learn More
  13. Carling Contura II MOMENTARY-OFF-MOMENTARY Switch

    Carling Contura II MOMENTARY-OFF-MOMENTARY Switch

    $30.00

    Carling Contura II MOMENTARY-OFF-MOMENTARY Switch. Momentary spring loaded 2-way rocker switch. Use the DP switch wiring when using the momentary switch as an electric window control. Use the SP switch wiring when using the momentary switch as a winch control. Learn More
  14. Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2)

    Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2)

    $125.00

    Range Rover Sport (2006-2013) 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  15. Handle for CargoBear system roof rack

    Handle for CargoBear system roof rack

    $90.00

    This is a Handle for the CargoBear system roof rack, which gives a convenient grab location for accessing your roof rack, roof top tent, or similar. The handle is made of alumuminum and powdercoated black, and can be used on all CargoBear roof rack systems. Price is per (1), and includes the mounting hardware. Learn More
  16. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior, NO DOOR HINGE BOLTS)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior, NO DOOR HINGE BOLTS)

    $183.33

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  17. Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

    Rear Window Vents - Jeep Wrangler JL Unlimited 2018+ (set of 2)

    Regular Price: $135.00

    Special Price $125.00

    Jeep JL Window vents are ideal for allowing air circulation without compromising security or allowing water to enter. Made from black powder coated aluminium and are incredibly easy to install – just wind down the rear window, pop in the ventilation plate and wind the window back up. They also have the added bonus of stopping the rear windows working their way down whilst the vehicle is being driven. They are ideal for campers that want to lessen the build up of heat in a parked vehicle, and also have the added bonus of mosquito nets. Will fit all 4-door Jeep Wrangler JL Unlimited 2018- present, sold in pairs. Learn More
  18. Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)

    Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)

    $175.00

    Conversion kit for all Land Rover Defender 90/110 all model years with rear station wagon door. This conversion kit is for mounting on the TOP on the rear door, and includes stainless steel mounting hardware. This replaces the bottom checkstrap with a TOP mount Gas Strut, with a soft-stop function that keeps the door reliably open. Damper functions properly even with our spare tire carrier mounted to the rear crossmember. Learn More
  19. [FACTORY SECONDS WITH FINISH ISSUES] Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    [FACTORY SECONDS WITH FINISH ISSUES] Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    Regular Price: $175.00

    Special Price $75.00

    PLEASE NOTE: THESE ARE BEING OFFERED AS "FACTORY SECONDS" DUE TO SLIGHT MANUFACTURING ISSUES WITH THE FONT COLOR/PAINT. THE ISSUES ARE RELATIVELY MINOR, BUT DO AFFECT THE FINISH OF THE PRODUCT. Learn More
  20. Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    Camel Trophy Plaque - embossed/backed aluminum - original vehicle plates

    $175.00

    These embossed aluminum signs are the *exact* specifications that were used in the Camel Trophy event on the vehicles racks, and are supplied from the company that manufactured the vehicle plates for the Camel Trophy event originally from 1980-1998. Learn More
  21. Rear Window Vents - Mercedes G-Class / G-Wagen (set of 2)

    Rear Window Vents - Mercedes G-Class / G-Wagen (set of 2)

    $125.00

    Mercedes-Benz G-Class / G-Wagen / Station Wagon 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs. Learn More
  22. Rear Window Vents - Toyota Land Cruiser J80 (set of 2)

    Rear Window Vents - Toyota Land Cruiser J80 (set of 2)

    $125.00

    1990-1997 Toyota Land Cruiser J80 / Station Wagon 2nd Row Door Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. The units are constructed from aluminum and powdercoated black for a long-lasting durable finish. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Ideal for campers that want to dissipate the heat from their vehicle, and include a mosquito-netting backer to keep out the bugs! Sold in pairs. Learn More
  23. High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    High Tensile Stainless Steel Bolts for Defender NAS Roll Cage (*sold individually*, available in bare stainless or black oxide coated)

    $4.00

    This replacement bolt corresponds to the original Land Rover part number ALR5549, and these are stainless steel replacements used to attach a NAS roll cage to a Defender. Please note that this replacement hardware is a HIGH TENSILE STAINLESS STEEL in Grade A2-80 providing a minimum tensile strength of approximately 115,000 psi. Available in bare stainless or black oxide finish. Price per piece, optional add-on replacement nyloc nut & isolating washers also available. Learn More
  24. Defender 90/110 INTERIOR Stainless Hardware Kit

    Defender 90/110 INTERIOR Stainless Hardware Kit

    $125.00

    This is an INTERIOR ONLY stainless steel bolt/screw hardware kit to fit a Land Rover Defender 90/110, and contains approximately 360 pieces. All bolt packages are clearly labeled and packaged for ease of installation (16 separate packages). The kit includes stainless hardware for: Lower Dash, Instrument Panel, Heater Controls & Center Dash, Dash & Visors, Demister/Defrost Vents, Windshield Pillars, Driver Side End Cap, Tray Trim, Door Panels (ST), Check Strap & Cover, Kick Panel Trim., Floor Pans, Door Sills, Rear Fender Brackets, Seat Rail Bolts, Rear Door Trim (if applicable). Learn More
  25. NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    NAS Defender Crossbars (set of 2) [***3-6 WEEK PRODUCTION LEAD-TIME***]

    $500.00

    [THIS ITEM IS CUSTOM MADE TO ORDER, ESTIMATED PRODUCTION LEAD TIME IS APPROX. 3-6 WEEKS]. These crossbars run from the front side rollbars on a NAS (North American Spec) Defender and allow roof racks, baskets, and similar to be mounted safely to the top of your vehicle (note: rack and/or basket NOT included). These units are constructed from 1-1/2" steel tubing, and utilize custom fabrication collar clamps and mounts to secure them in place. Available in two finishes - painted black or powdercoated black (add +2 week to lead-time for powdercoating). Note: our painted *AND* powdercoated versions have a very slight texture to it, which helps to resist marring when mounting baskets/etc on and off from the bars. Learn More
  26. Carling Contura II OFF-ON Switch

    Carling Contura II OFF-ON Switch

    $17.50

    Carling Contura II OFF-ON Switch. One-way switch to simply switch on and off (i.e. spot lights or similar). Learn More
  27. Carling Contura II Hazard Switch

    Carling Contura II Hazard Switch

    $30.00

    Carling Contura II Hazard Switch for Land Rover Defender. Learn More
  28. Demister/Defrost Dash Vent Trim (14.5", set of 2)

    Demister/Defrost Dash Vent Trim (14.5", set of 2)

    $130.00

    CNC milled aluminum replacement defrost dash vent trim (14.5" size, set of 2) - FITS DEFENDER MODEL YEAR 1989+ Learn More
  29. Interior Door Pull/Grab Handles (set of 2)

    Interior Door Pull/Grab Handles (set of 2)

    $140.00

    CNC milled aluminum replacement interior door handles (SET of 2) Learn More
  30. Defender Front Grille

    Defender Front Grille

    $500.00

    This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. PLEASE NOTE: we currently have two versions of the Front Grille - one designed for those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle), and those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle). This unit is designed for those with the in-cabin bonnet pull cable, if you require the other version of the Front Grille please see our other listing. Learn More
  31. Wingtop Vent (standard LEFT-SIDE ONLY)

    Wingtop Vent (standard LEFT-SIDE ONLY)

    $95.00

    CNC milled aluminum replacement wingtop vent (LEFT-SIDE ONLY) Learn More
  32. Wingtop Vent (standard RIGHT-SIDE ONLY)

    Wingtop Vent (standard RIGHT-SIDE ONLY)

    $95.00

    CNC milled aluminum replacement wingtop vent (RIGHT-SIDE ONLY) Learn More
  33. Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

    Wingtop Vent (SOLID TOP RIGHT-SIDE ONLY)

    $95.00

    SOLID TOP RIGHT-SIDE ONLY milled aluminum wingtop vent (for Right-Hand Drive vehicles only) Learn More
  34. Soft Top Clips (rear window tailgate crossbar retaining clips)

    Soft Top Clips (rear window tailgate crossbar retaining clips)

    $85.00

    Land Rover Defender rear window / rear tailgate crossbar soft-top retaining clips. Made from solid billet aluminum and powdercoated black. Learn More
  35. Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

    Wingtop Vent (SOLID TOP LEFT-SIDE ONLY)

    $95.00

    SOLID TOP LEFT-SIDE ONLY milled aluminum wingtop vent (for Left-Hand Drive vehicles only) Learn More
  36. Carling Contura II OFF-ON-ON Switch

    Carling Contura II OFF-ON-ON Switch

    $25.00

    Carling Contura II OFF-ON-ON Switch. Three position switch allowing you to wire two auxiliary circuits through one switch. Typical application would be for controlling two pairs of spotlamps or two electric fans via the one switch. Click switch once to activate circuit one; click again to activate circuits one and two. Learn More
  37. Demister/Defrost Dash Vent Trim (10.5", set of 2)

    Demister/Defrost Dash Vent Trim (10.5", set of 2)

    $130.00

    CNC milled aluminum replacement defrost dash vent trim (10.5" size, set of 2) - FITS DEFENDER MODEL YEAR 1983-1988 & SERIES III 1973+ VEHICLES ONLY Learn More
  38. Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    Defender 90 ST (NAS) Stainless Hardware Kit (Exterior & Interior)

    $275.00

    This exterior/interior stainless steel bolt/screw hardware kit fits a NAS 90 Soft Top configuration, and contains approximately 632 pieces. All bolt packages are clearly labeled and packaged for ease of installation (29 separate packages). The kit includes stainless hardware for the EXTERIOR and the INTERIOR of the NAS 90 Soft-Top vehicles.
    Learn More
  39. Carling ARB-style OFF-ON Switch

    Carling ARB-style OFF-ON Switch

    $25.00

    Carling ARB-style OFF-ON Switch (blue lens / illumination). Learn More
  40. Carling Contura II REAR WASH-WIPE Switch

    Carling Contura II REAR WASH-WIPE Switch

    $30.00

    Carling Contura II REAR WASH-WIPE Switch. Learn More
  41. Carling Contura II ON-OFF-ON Switch

    Carling Contura II ON-OFF-ON Switch

    $25.00

    Carling Contura II ON-OFF-ON Switch. This alternative three position switch allows you to wire two auxiliary circuits through the one switch. This switch operates where circuits one or two are activated completely independently from one another. This switch will replace the standard switch supplied with the popular Exmoor Trim/Waeco heated seat kits. Learn More
  42. Defender 2nd Row Doors Window Vents (set of 2)

    Defender 2nd Row Doors Window Vents (set of 2)

    $125.00

    Defender 2nd Row Doors Window Vents (set of 2) are perfect for allowing air circulation without compromising security or allowing water to enter. They are extremely easy to install, just roll down the rear window, place the Vents, and roll the window back up....there are NO modifications required to install these. Learn More
  43. Defender 90 SW Stainless Hardware Kit (Exterior)

    Defender 90 SW Stainless Hardware Kit (Exterior)

    $175.00

    This stainless steel bolt/screw exterior hardware kit fits a 90 Station Wagon configuration, and contains approximately 380 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door sill inside, a-pillar, side door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  44. Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    Defender 110 SW / 130 CC Stainless Hardware Kit (Exterior)

    $200.00

    This stainless steel bolt/screw exterior hardware kit fits a 110 Station Wagon or 130 Crew Cab configuration, and contains approximately 430 pieces. This it the only stainless kit for the Land Rover Defender that comes complete with the GENUINE Land Rover door bolt head configuration. The kit includes the stainless hardware for bonnet hinges, load area bars/reflectors, front grille, headlight surrounds and wingtop vent air intake covers, door pillar & a-pillar, side door hinges, back door hinges, rear crossmember, spare tire carrier, rear body mount crossmember tabs, bonnet buffer screws, and anti-seize paste packets. Learn More
  45. Defender Front Grille (w/ cutout for manual bonnet latch)

    Defender Front Grille (w/ cutout for manual bonnet latch)

    $500.00

    Similar to our "standard" SDO Front Grille....BUT this particular unit is designed for those those with the "manual bonnet latch-release" (the lever that is at the front of the vehicle and allows you to manually open the bonnet), versus those with the "in-cabin bonnet pull" (i.e. the cable running from the footwell to the front of the vehicle). This is a replacement front grille for a Land Rover Defender, and is a stout 3/16” thick solid CNC milled aluminum, featuring 5/8” diameter octagonal beveled vent holes for plenty of airflow (and in the octagonal design to complement the Wingtop Vent hole style). The top 3” of the grill is form-rolled to exactly match the curvature of the Defender grille surround, and powdercoated black for a durable finish. Learn More
  46. Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    Garrison Anti-Rattle Window Channel Kit (ST Removable Door Tops)

    $130.00

    This proprietary rubberized window channel replaces the inferior factory felt lining in Land Rover Defender removable door tops and eliminates the famous glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  47. Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    Garrison Anti-Rattle Window Channel Kit (SW Rear Sliding Windows)

    $130.00

    This unique rubberised extrusion replaces the factory felt lining in Land Rover Defender rear sliding windows and eliminates the irritating glass 'chatter' common in these vehicles. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Kit contains materials for (2) windows, i.e. one complete vehicle. Learn More
  48. Wingtop Vents (standard SET)

    Wingtop Vents (standard SET)

    $190.00

    CNC milled aluminum replacement wingtop vents (SET) Learn More

48 Item(s)

per page

List  Grid 

Set Ascending Direction