Interior
Upgraded replacement interior bits for the Land Rover Defender.
32 Item(s)
per page
List Grid
-
Land Rover Defender 90/110/130 Phone Dash Mount, aluminum (fits model years 1983-2006)
Regular Price: $175.00
Special Price $160.00
This custom phone mount was designed to be used with the Land Rover Defender dash (model year 1983-2006), and fits to the vehicle without any modifications (simply remove the factory screw in the middle of the center dash, and replace with our included kit & hardware). Learn More -
Interior Door Pull/Grab Handles (set of 2)
$140.00CNC milled aluminum replacement interior door handles (SET of 2) Learn More -
Interior Leather Door Pull/Grab Handles (set of 2) for Land Rover Defender
$50.00Leather door pulls for the interior, made of black or cognac-colored saddle leather with elegant white stitching, handmade, Sold in pairs, incl. High-quality stainless steel screws. Learn More -
Seat Back Trim Rubbing Strip (set of 2)
$95.00CNC milled aluminum replacement seat trim rubbing strips (SET of 2) Learn More -
Soft Top Clips (rear window tailgate crossbar retaining clips)
$95.00Land Rover Defender rear window / rear tailgate crossbar soft-top retaining clips. Made from solid billet aluminum and powdercoated black. Learn More -
Rear / 2nd Row Door Opening Angle Kit for Land Rover Defender 110 / 130
$155.00This stainless steel door opening angle kit allows you to open the rear / second row doors on a Defender 110 or 130 Crew Cab to a maximum angle of 95°. This provided more convenient ingress and egress for passengers, but also more room to access and load gear in and out of the rear doors (coolers, fridges, storage cases, etc). Easy installation with no drilling required, as it bolts to the original mounting points. Fits all model years of the Land Rover Defender 1983-2015. Learn More -
Seat Risers / Rail Extensions (stainless steel, powdercoated black)
$115.00Seat risers / rail extensions that raise the seat approximately 2" (50mm), suitable for Land Rover Defender 90/110/130 (all model years 1985-2015, except for ex-MOD/military vehicles). Made of stainless steel, black powder coated, and price is for a set to do (1) single seat - includes fastening hardware. Learn More -
Defender 90/110 INTERIOR Stainless Hardware Kit
$175.00This is an INTERIOR ONLY stainless steel bolt/screw hardware kit to fit a Land Rover Defender 90/110, and contains approximately 360 pieces. All bolt packages are clearly labeled and packaged for ease of installation (16 separate packages). The kit includes stainless hardware for: Lower Dash, Instrument Panel, Heater Controls & Center Dash, Dash & Visors, Demister/Defrost Vents, Windshield Pillars, Driver Side End Cap, Tray Trim, Door Panels (ST), Check Strap & Cover, Kick Panel Trim., Floor Pans, Door Sills, Rear Fender Brackets, Seat Rail Bolts, Rear Door Trim (if applicable). Learn More -
NAS Soft-Top Rear Speaker Panels
$225.00These are replacement speaker housings for the North American Specification (NAS) Defender 90 Soft-Top models, to replace original part #AWR1550LNF and AWR1551LNF. The apertures within the housing will accept a 5.25" speaker and include the slots for the rear seatbelt trim/insert, and the speaker housings can also be trimmed slightly to also accept a 6.5" speaker (as pictured). Also available in a speaker "blank" with no cutout as well. Learn More -
Station Wagon - Defender Rear Speaker Panels
Regular Price: $150.00
Special Price $125.00
The Station Wagon Rear Speaker Panels have been designed so you can install a larger 130mm (5.25in) speaker into the rear body corner of the Land Rover Defender. The standard Defender speakers are 100mm (4in) which both restricts the speaker performance and limits your choice of aftermarket speaker upgrade. Fitting is by simple screw fixing....we include full color instructions and fitting materials. Learn More -
Land Rover Defender Console (Center Dash) 1983-1998
$125.00The Defender Centre Console solves the problem of where to mount those extra switches and gauges in the Defender dashboard and is supplied as a blank molding to provide the user with the flexibility to create their own unique dash layout that best satisfies their requirements. FITS MODEL YEAR: Defender 1983-1998, Series III 1972-1985. Learn More -
Defender Dashboard Coin Tray (replaces factory ash tray) Land Rover 90/110/130
$35.00This little known Land Rover part became available on later model Td5 Defenders and replaces the standard fitment ashtray on top of the Defender dashboard with a useful coin tray. To fit the Defender coin tray simply remove the ashtray and the metal securing clip from the dashboard, and insert the coin tray.....literally fits in seconds! Learn More -
Defender Tunnel Tray for Land Rover Defender 90/110/130 (Left-Hand Drive / LHD, R380)
$90.00The Defender Tunnel Tray has been designed to fit on top of the transmission tunnel of all Land Rover Defenders (90, 110, 130) fitted with the R380 gearbox (Tdi, Td5 , and most V8 models). Unfortunately the Tunnel Tray will *NOT* fit the LT77 transmission tunnel or the early factory V8 engine vehicles fitted with the LT85 gearbox. Learn More -
Door Pads for Land Rover Defender
$110.00Armrest for the door of the Land Rover Defender 90/110/130, covered with elaborate aluminum substructure, with naturally tanned leather (black), either for the right or left side. Learn More -
Land Rover Defender (or Series) Keychain
Regular Price: $42.50
Special Price $40.00
Land Rover Keychains a nice complement to any Land Rover Defender or Series truck (or any other Rover model!) to proudly display your keys. Available in either the "Solihull" or "Four Wheel Drive Station Wagon" configuration [options selected at checkout]. Keychain tag measures approximately 2" long, and includes a 1" keyring. Made from solid aluminum with a black powdercoated finish. Learn More -
Defender Cubby Box Console Base / Security Console
$400.00Cubby Box Console Base / Security Console for all Land Rover Defender 90/110/130 (all years), the unit mounts below the factory cubby box / center console, and has a concealed lock to ensure safety & security of the contents. The Console Base will raise the console approximately 5” to provide a better arm rest height while also giving additional discreet storage beneath the cubby. Available with optional Blue Sea 12V and USB sockets, and/or 20amp rocker switches. Learn More -
Defender Rear Station Wagon Door Gas Strut (TOP MOUNT)
Regular Price: $225.00
Special Price $200.00
Conversion kit for all Land Rover Defender 90/110 all model years with rear station wagon door. This conversion kit is for mounting on the TOP on the rear door, and includes stainless steel mounting hardware. This replaces the bottom checkstrap with a TOP mount Gas Strut, with a soft-stop function that keeps the door reliably open. Damper functions properly even with our spare tire carrier mounted to the rear crossmember. Learn More -
Defender Rear Station Wagon Door Gas Strut (up to MY2001)
$125.00Conversion kit for all Land Rover Defender 90/110 to model year 2001 with rear station wagon door. Replaces the anchor with a special gas pressure shock with soft-stop function, which keeps the door reliably open. Learn More -
Defender Rear Station Wagon Door Gas Strut 2.0 (from MY2002)
$150.00Conversion kit for all Land Rover Defender 90 / 110 models from Model Year 2002 with rear station wagon door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. Learn More -
Tailgate Organizer for Land Rover Defender
$275.00Where to put all the little odds and ends in an expedition vehicle? First-aid kid, multimeter, work gloves, winch controls, tire repair kit, etc....all these things have to be put somewhere. Our tailgate organizer makes use of the mostly unused space on the rear door. In several pockets attached with MOLLE attachment system you can store away all these bits and pieces which then are at hand once needed. Learn More -
Tailgate Organizer / Rear Door for New Defender (L663 from Model Year 2020)
Regular Price: $250.00
Special Price $225.00
Tailgate Organizer - Rear door storage system for the NEW Defender from 2020 onwards. The Tailgate Organizer makes use of the mostly unused space on the tailgate, allowing storage of gear such as First-aid kits, multimeters, work gloves, winch controls, tire repair kits. Learn More -
Folding Table
$450.00The folding table can be temporarily or permanently mounted on vertical surfaces, for example inside the tailgate of a off-road vehicle, but also on the outside of a trailer, rear quarter panel of a vehicle, etc. The table is constructed of laser cut aluminum, and powdercoated black. Learn More -
Cubby Box Heater Base
$275.00Allows the installation of a stand-alone heater underneath the Cubby box, making it a comfortable armrest. Available with 12V sockets and / or USB charging sockets. Learn More -
Mounting Plate for heater
$75.00Stainless steel base plate for mounting common heaters in Land Rover Defender 90/110/130. Learn More -
Webasto air diffuser, rotatable, with 60mm connection
$30.00Rotating air outlet, with 60mm connection, suitable for a wide range of heating systems from Webasto, Eberspächer and Planar. Learn More -
"Curry Hook" Shopping bag holder, double hook
$10.00A truly practical and useful accessory for your Defender - and probably the most affordable one. This versatile hook can be attached to almost any surface that is self-supporting or solid. With this easy-to-install hook, you have a secure fix point for your jacket, shopping back, refuse bag, or similar. No more rolling shopping bags in the passenger's footwell! And the best: This hook fits perfectly to the interior of the Defenders. Includes (1) unit/hook. Learn More -
LED Interior Light for Land Rover Defender (Warm White)
$135.00LEDs are not only popular in headlights and signal lamps, but also advantageous in the interior of the vehicle. The LED interior light is a simple "plug and play exchange" for the existing interior lights (front or rear) of the Land Rover Defender SW. Simply remove the original cover and the lamp of the previous factory unit (AMR3155) are removed, install the LED unit, and all previous functions of the interior light (on / off / door opening) are retained. In addition, the lighting can be switched over to a "red light" to preserve night vision (activated via the red push button). If the interior light is switched off, it will accept the last selected light color the next time the lamp is switched on. Learn More -
![Leather center insert for RAID sports steering wheel, Land Rover Defender [***CUSTOM ITEM MADE TO ORDER, ~4-6 WEEK LEAD-TIME***]](https://www.seriesdefender.com/media/catalog/product/cache/1/small_image/135x/9df78eab33525d08d6e5fb8d27136e95/s/l/slr-defhkllr-bbs-lederabdeckung-f-r-sportlenkrad-raid-defender-schwarz-2-wz.jpg)
Leather center insert for RAID sports steering wheel, Land Rover Defender [***CUSTOM ITEM MADE TO ORDER, ~4-6 WEEK LEAD-TIME***]
$100.00Cover with integrated original Land Rover emblem for sports steering wheel RAID, suitable for Land Rover Defender 90/110/130, made of real leather with great feel and a sophisticated decorative stitching, replaces the "horn button", available in different colors. Learn More -
Leather center insert for MOMO Sport Steering Wheel, Land Rover Defender
$100.00Cover with integrated original Land Rover emblem for the MOMO steering wheel, suitable for Land Rover Defender 90/110/130. Made of real leather with great feel and a sophisticated decorative stitching, replaces the "horn button", available in different colors. Learn More -
Rear Load Bay Sill for Land Rover Defender (stainless steel)
$60.00Rear Load Bay Sill in stainless steel, replaces the original rear load bay sill which is prone to rust. Fitting holes identical to original sill for ease of fitting, and is supplied with stainless steel mounting hardware. Learn More -
RAM Mount ball and adapter for Land Rover Defender Td4/Puma (from MY2007-2015)
Regular Price: $75.00
Special Price $65.00
Easy to fit (1") RAM Mount ball adapter, replaces the original bolt from the passenger-side grab bar/handle, for all Land Rover Defender Td4/Puma (from model year 2007-2015/2016). Extremely sturdy, and easy to remove...and once fitted will allow you to fasten a smartphone, tablet, GoPro, GPS, CB, iPad, or any similar device using standard RAM mount brackets. Learn More -
DIN bay for Land Rover Defender Puma/Td4
$100.00DIN bay for mounting under the glove box, for vehicles from model year 2007+ with 2.4l and 2.2l engine, ideal for installation of CB, radio or switches .< Learn More
32 Item(s)
per page
List Grid
Newsletter
